• [^] # Re: Garde la, ça marche !

    Posté par . En réponse au message Besoin d aide / carte hauppauge pvr 350. Évalué à 1.

    ah enfin !
    Je n' y croyais plus !!merci beaucoup!
    alors dmesg donne :
    ivtv0: Autodetected Hauppauge card (cx23415 based)
    [ 36.360092] ACPI: PCI Interrupt .&checktime(0000,00,0,':')d.0[A] -> GSI 19 (level, low) -> IRQ
    20
    [ 36.403699] Linux agpgart interface v0.102 (c) Dave Jones
    [ 36.464357] nvidia: module license 'NVIDIA' taints kernel.
    [ 37.007297] ivtv0: loaded v4l-cx2341x-enc.fw firmware (4158312232 bytes)
    [ 37.029467] ivtv0: loaded v4l-cx2341x-dec.fw firmware (4158312240 bytes)
    [ 37.249555] ivtv0: Encoder revision: 0x02050032
    [ 37.249558] ivtv0: Recommended firmware version is 0x02060039.
    [ 37.257559] ivtv0: Decoder revision: 0x02020023
    [ 37.318137] tveeprom 0-0050: Hauppauge model 48139, rev K2B7, serial# 9927561
    [ 37.318140] tveeprom 0-0050: tuner model is Philips FM1216ME MK5 (idx 117, ty
    pe 38)
    [ 37.318143] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D
    1/K) (eeprom 0x74)
    [ 37.318145] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
    [ 37.318147] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
    [ 37.318149] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitte
    r
    [ 37.318151] ivtv0: Autodetected Hauppauge WinTV PVR-350
    [ 37.340150] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
    [ 37.340181] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
    [ 37.343321] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
    [ 37.394862] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c
    driver #0)
    [ 37.574592] saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
    [ 37.600996] msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
    [ 37.600999] msp3400 0-0040: MSP4418G-B3 supports nicam and radio, mode is aut
    odetect and autoselect
    [ 37.601133] tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME M
    K3))
    [ 37.851997] ivtv0: Registered device video0 for encoder MPEG (4 MB)
    [ 37.852153] ivtv0: Registered device video32 for encoder YUV (2 MB)
    [ 37.852307] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
    [ 37.852385] ivtv0: Registered device video24 for encoder PCM audio (1 MB)
    [ 37.852583] ivtv0: Registered device radio0 for encoder radio
    [ 37.852609] ivtv0: Registered device video16 for decoder MPEG (1 MB)
    [ 37.852655] ivtv0: Registered device vbi8 for decoder VBI (1 MB)
    [ 37.852903] ivtv0: Registered device vbi16 for decoder VOUT
    [ 37.852926] ivtv0: Registered device video48 for decoder YUV (1 MB)
    [ 37.926489] ivtv0: loaded v4l-cx2341x-init.mpg firmware (3753002000 bytes)
    [ 38.119880] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
    [ 38.119914] ivtv: ==================== END INIT IVTV ====================


    ll /lib/firmware/ commande introuvable ......