Le problème, c'est que je ne trouve pas le module de ma carte réseau.
Ma carte mère est une Gigabyte GA-73PVM-S2H avec une carte réseau intégrée Realtek® RTL8211B.
Voici le dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-15lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed May 13 15:37:46 UTC 2009
[ 0.000000] Command line: root=/dev/sda2 ro quiet vga=791
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077000000 (usable)
[ 0.000000] BIOS-e820: 0000000077000000 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 000000007f000000 - 000000007fde0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e2000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 487424) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 520192, 523744) 2 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F65A0, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 7FEE3040, 0034 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: DSDT 7FEE3180, 5301 (r1 GBT GBTUACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 7FEE1800, 0040
[ 0.000000] ACPI: HPET 7FEE8600, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
[ 0.000000] ACPI: MCFG 7FEE8680, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: APIC 7FEE8500, 0098 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fde0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 487424) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 520192, 523744) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fde0000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff]
[ 0.000000] bootmap [0000000000011000 - 0000000000020fbf] pages 10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [3798d000-37fefc7b] RAMDISK
[ 0.000000] early res: 4 [9f800-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-bfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 487424
[ 0.000000] 0: 520192 -> 523744
[ 0.000000] On node 0 totalpages: 490879
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1244 pages reserved
[ 0.000000] DMA zone: 2699 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7105 pages used for memmap
[ 0.000000] DMA32 zone: 479775 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000077000000 - 000000007f000000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 482474
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda2 ro quiet vga=791
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 2499.999 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 1923388k/2094976k available (2225k kernel code, 40128k reserved, 1080k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083878] Calibrating delay using timer specific routine.. 5005.25 BogoMIPS (lpj=10010512)
[ 0.083915] Security Framework initialized
[ 0.083921] SELinux: Disabled at boot.
[ 0.083924] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 2048K
[ 0.084005] CPU 0/0 -> Node 0
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] CPU0: Thermal monitoring enabled (TM2)
[ 0.084005] using mwait in idle threads.
[ 0.084005] ACPI: Core revision 20080321
[ 0.132008] CPU0: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[ 0.132008] Using local APIC timer interrupts.
[ 0.136008] APIC timer calibration result 12499985
[ 0.136008] Detected 12.499 MHz APIC timer.
[ 0.136008] Booting processor 1/1 ip 6000
[ 0.144009] Initializing CPU#1
[ 0.144009] Calibrating delay using timer specific routine.. 4999.95 BogoMIPS (lpj=9999916)
[ 0.144009] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.144009] CPU: L2 cache: 2048K
[ 0.144009] CPU 1/1 -> Node 0
[ 0.144009] CPU: Physical Processor ID: 0
[ 0.144009] CPU: Processor Core ID: 1
[ 0.144009] CPU1: Thermal monitoring enabled (TM2)
[ 0.224014] CPU1: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[ 0.224014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.228014] Brought up 2 CPUs
[ 0.228014] Total of 2 processors activated (10005.21 BogoMIPS).
[ 0.228014] CPU0 attaching sched-domain:
[ 0.228014] domain 0: span 0-1
[ 0.228014] groups: 0 1
[ 0.228014] domain 1: span 0-1
[ 0.228014] groups: 0-1
[ 0.228014] CPU1 attaching sched-domain:
[ 0.228014] domain 0: span 0-1
[ 0.228014] groups: 1 0
[ 0.228014] domain 1: span 0-1
[ 0.228014] groups: 0-1
[ 0.228014] net_namespace: 1224 bytes
[ 0.228014] Booting paravirtualized kernel on bare hardware
[ 0.228014] NET: Registered protocol family 16
[ 0.228014] ACPI: bus type pci registered
[ 0.228014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 31
[ 0.228014] PCI: MCFG area at e0000000 reserved in E820
[ 0.228014] PCI: Using MMCONFIG at e0000000 - e1ffffff
[ 0.228014] PCI: Using configuration type 1 for base access
[ 0.228014] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.228014] mtrr: probably your BIOS does not setup all CPUs.
[ 0.228014] mtrr: corrected configuration.
[ 0.228014] ACPI: EC: Look up EC in DSDT
[ 0.233960] ACPI: Interpreter enabled
[ 0.233962] ACPI: (supports S0 S3 S4 S5)
[ 0.233975] ACPI: Using IOAPIC for interrupt routing
[ 0.244015] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.244015] PCI: Transparent bridge - .&checktime(0000,00,0,':')a.0
[ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.284017] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284017] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284017] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
[ 0.284017] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284017] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284017] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284017] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284146] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284271] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284398] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
[ 0.287051] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.287177] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.287307] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.287434] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.287561] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.287687] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.287813] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.287940] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.288069] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.288195] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.288364] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.288524] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.288685] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.288844] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.289004] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.289164] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.289324] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.289484] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.289644] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.289805] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[ 0.289966] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
[ 0.290126] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
[ 0.290287] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
[ 0.290448] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.290612] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.290774] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.290935] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.291096] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.291257] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.291418] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.292372] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.292806] pnp: PnP ACPI init
[ 0.292813] ACPI: bus type pnp registered
[ 0.292873] pnp 00:00: parse allocated resources
[ 0.292952] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.293413] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.293423] pnp 00:01: parse allocated resources
[ 0.293570] pnp 00:01: add io 0x1000-0x107f flags 0x1
[ 0.293572] pnp 00:01: add io 0x1080-0x10ff flags 0x1
[ 0.293574] pnp 00:01: add io 0x1400-0x147f flags 0x1
[ 0.293575] pnp 00:01: add io 0x1480-0x14ff flags 0x1
[ 0.293577] pnp 00:01: add io 0x1800-0x187f flags 0x1
[ 0.293578] pnp 00:01: add io 0x1880-0x18ff flags 0x1
[ 0.293580] pnp 00:01: add mem 0x0-0xffffffffffffffff flags 0x10000001
[ 0.293582] pnp 00:01: add mem 0xfefe0000-0xfefe01ff flags 0x1
[ 0.293583] pnp 00:01: add mem 0xfefe1000-0xfefe10ff flags 0x1
[ 0.293585] pnp 00:01: add mem 0x77000000-0x7effffff flags 0x1
[ 0.293587] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.294050] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294118] pnp 00:02: parse allocated resources
[ 0.294124] pnp 00:02: add io 0x10-0x1f flags 0x1
[ 0.294126] pnp 00:02: add io 0x22-0x3f flags 0x1
[ 0.294127] pnp 00:02: add io 0x44-0x5f flags 0x1
[ 0.294128] pnp 00:02: add io 0x62-0x63 flags 0x1
[ 0.294130] pnp 00:02: add io 0x65-0x6f flags 0x1
[ 0.294131] pnp 00:02: add io 0x74-0x7f flags 0x1
[ 0.294133] pnp 00:02: add io 0x91-0x93 flags 0x1
[ 0.294134] pnp 00:02: add io 0xa2-0xbf flags 0x1
[ 0.294136] pnp 00:02: add io 0xe0-0xef flags 0x1
[ 0.294137] pnp 00:02: add io 0x4d0-0x4d1 flags 0x1
[ 0.294139] pnp 00:02: add io 0x800-0x87f flags 0x1
[ 0.294140] pnp 00:02: add io 0x295-0x314 flags 0x1
[ 0.294142] pnp 00:02: add io 0x290-0x294 flags 0x1
[ 0.294143] pnp 00:02: add io 0x880-0x88f flags 0x1
[ 0.294145] pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.294545] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294545] pnp 00:03: parse allocated resources
[ 0.294545] pnp 00:03: add dma 4 flags 0x4
[ 0.294545] pnp 00:03: add io 0x0-0xf flags 0x1
[ 0.294545] pnp 00:03: add io 0x80-0x90 flags 0x1
[ 0.294545] pnp 00:03: add io 0x94-0x9f flags 0x1
[ 0.294545] pnp 00:03: add io 0xc0-0xdf flags 0x1
[ 0.294545] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.294545] pnp 00:04: parse allocated resources
[ 0.294545] pnp 00:04: add irq 8 flags 0x1
[ 0.294545] pnp 00:04: add mem 0xfeff0000-0xfeff03ff flags 0x1
[ 0.294545] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.294545] pnp 00:05: parse allocated resources
[ 0.294545] pnp 00:05: add io 0x70-0x73 flags 0x1
[ 0.294545] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.294545] pnp 00:06: parse allocated resources
[ 0.294545] pnp 00:06: add io 0x61-0x61 flags 0x1
[ 0.294545] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.294545] pnp 00:07: parse allocated resources
[ 0.294545] pnp 00:07: add io 0xf0-0xff flags 0x1
[ 0.294545] pnp 00:07: add irq 13 flags 0x1
[ 0.294545] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.294545] pnp 00:08: parse allocated resources
[ 0.294545] pnp 00:08: add io 0x3f8-0x3ff flags 0x1
[ 0.294545] pnp 00:08: add irq 4 flags 0x1
[ 0.294545] pnp 00:08: parse resource options
[ 0.294545] pnp 00:08: new independent option
[ 0.294545] pnp 00:08: new dependent option (priority 0x1)
[ 0.294545] pnp 00:08: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:08: new dependent option (priority 0x1)
[ 0.294545] pnp 00:08: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:08: new dependent option (priority 0x1)
[ 0.294545] pnp 00:08: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:08: new dependent option (priority 0x1)
[ 0.294545] pnp 00:08: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:08: end dependent options
[ 0.294545] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.294545] pnp 00:09: parse allocated resources
[ 0.294545] pnp 00:09: add io 0x378-0x37f flags 0x1
[ 0.294545] pnp 00:09: add io 0x778-0x77b flags 0x1
[ 0.294545] pnp 00:09: add irq 7 flags 0x1
[ 0.294545] pnp 00:09: add dma 3 flags 0x0
[ 0.294545] pnp 00:09: parse resource options
[ 0.294545] pnp 00:09: new independent option
[ 0.294545] pnp 00:09: new dependent option (priority 0x1)
[ 0.294545] pnp 00:09: io min 0x378 max 0x378 align 0 size 8 flags 0x1
[ 0.294545] pnp 00:09: io min 0x778 max 0x778 align 0 size 4 flags 0x1
[ 0.294545] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:09: dma bitmask 0xb flags 0x0
[ 0.294545] pnp 00:09: new dependent option (priority 0x1)
[ 0.294545] pnp 00:09: io min 0x278 max 0x278 align 0 size 8 flags 0x1
[ 0.294545] pnp 00:09: io min 0x678 max 0x678 align 0 size 4 flags 0x1
[ 0.294545] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ ? 0.294545] pnp 00:09: dma bitmask 0xb flags 0x0
[ 0.294545] pnp 00:09: new dependent option (priority 0x1)
[ 0.294545] pnp 00:09: io min 0x3bc max 0x3bc align 0 size 4 flags 0x1
[ 0.294545] pnp 00:09: io min 0x7bc max 0x7bc align 0 size 4 flags 0x1
[ 0.294545] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:09: dma bitmask 0xb flags 0x0
[ 0.294545] pnp 00:09: end dependent options
[ 0.294545] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.294545] pnp 00:0a: parse allocated resources
[ 0.294545] pnp 00:0a: add io 0x60-0x60 flags 0x1
[ 0.294545] pnp 00:0a: add io 0x64-0x64 flags 0x1
[ 0.294545] pnp 00:0a: add irq 1 flags 0x1
[ 0.294545] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.295978] pnp 00:0b: parse allocated resources
[ 0.296014] pnp 00:0b: add mem 0xe0000000-0xe1ffffff flags 0x1
[ 0.296017] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.296488] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296497] pnp 00:0c: parse allocated resources
[ 0.296677] pnp 00:0c: add mem 0xcde00-0xcffff flags 0x1
[ 0.296679] pnp 00:0c: add mem 0xf0000-0xf7fff flags 0x1
[ 0.296680] pnp 00:0c: add mem 0xf8000-0xfbfff flags 0x1
[ 0.296682] pnp 00:0c: add mem 0xfc000-0xfffff flags 0x1
[ 0.296684] pnp 00:0c: add mem 0x7fee0000-0x7fefffff flags 0x1
[ 0.296685] pnp 00:0c: add mem 0xffff0000-0xffffffff flags 0x1
[ 0.296687] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1
[ 0.296688] pnp 00:0c: add mem 0x100000-0x7fedffff flags 0x1
[ 0.296690] pnp 00:0c: add mem 0xfec00000-0xfec00fff flags 0x1
[ 0.296692] pnp 00:0c: add mem 0xfee00000-0xfee00fff flags 0x1
[ 0.296693] pnp 00:0c: add mem 0xfeff0000-0xfeff03ff flags 0x1
[ 0.296696] pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.297168] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.297175] pnp: PnP ACPI: found 13 devices
[ 0.297176] ACPI: ACPI bus type pnp unregistered
[ 0.298545] usbcore: registered new interface driver usbfs
[ 0.298545] usbcore: registered new interface driver hub
[ 0.298545] usbcore: registered new device driver usb
[ 0.298545] PCI: Using ACPI for IRQ routing
[ 0.316990] PCI-GART: No AMD northbridge found.
[ 0.316998] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.317004] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.318059] ACPI: RTC can wake from S4
[ 0.332944] pnp: the driver 'system' has been registered
[ 0.332958] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.332963] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.332967] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.332971] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.332975] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.332979] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.332985] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
[ 0.332989] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
[ 0.332994] system 00:01: iomem range 0x77000000-0x7effffff could not be reserved
[ 0.332997] system 00:01: driver attached
[ 0.333005] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.333009] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.333013] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.333017] system 00:02: ioport range 0x290-0x294 has been reserved
[ 0.333021] system 00:02: ioport range 0x880-0x88f has been reserved
[ 0.333025] system 00:02: driver attached
[ 0.333039] system 00:0b: iomem range 0xe0000000-0xe1ffffff could not be reserved
[ 0.333042] system 00:0b: driver attached
[ 0.333053] system 00:0c: iomem range 0xcde00-0xcffff has been reserved
[ 0.333055] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.333057] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.333059] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.333061] system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.333063] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.333065] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.333067] system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.333069] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.333072] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.333074] system 00:0c: iomem range 0xfeff0000-0xfeff03ff could not be reserved
[ 0.333075] system 00:0c: driver attached
[ 0.334549] PCI: Bridge: .&checktime(0000,00,0,':')a.0
[ 0.334549] IO window: disabled.
[ 0.334549] MEM window: 0xe5000000-0xe50fffff
[ 0.334549] PREFETCH window: disabled.
[ 0.334549] PCI: Setting latency timer of device .&checktime(0000,00,0,':')a.0 to 64
[ 0.334549] NET: Registered protocol family 2
[ 0.370138] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.370676] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.370676] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.370676] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.370676] TCP reno registered
[ 0.379259] NET: Registered protocol family 1
[ 0.379354] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.506908] Switched to high resolution mode on CPU 0
[ 0.594553] it is
[ 0.820639] Freeing initrd memory: 6539k freed
[ 0.825095] audit: initializing netlink socket (disabled)
[ 0.825095] type=2000 audit(1243276344.816:1): initialized
[ 0.825095] Total HugeTLB memory allocated, 0
[ 0.825095] VFS: Disk quotas dquot_6.5.1
[ 0.825095] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.825095] msgmni has been set to 3769
[ 0.825095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.825095] io scheduler noop registered
[ 0.825095] io scheduler anticipatory registered
[ 0.825095] io scheduler deadline registered
[ 0.825095] io scheduler cfq registered (default)
[ 0.853594] pci .&checktime(0000,00,10,':').0: Boot video device
[ 0.856597] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20002980000, using 3072k, total 131072k
[ 0.856597] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 0.856597] vesafb: scrolling: redraw
[ 0.856597] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.869095] Console: switching to colour frame buffer device 128x48
[ 0.881607] fb0: VESA VGA frame buffer device
[ 0.881607] hpet_resources: 0xfeff0000 is busy
[ 0.881607] Linux agpgart interface v0.103
[ 0.881607] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.881682] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.885637] pnp: the driver 'serial' has been registered
[ 0.885637] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.885637] serial 00:08: driver attached
[ 0.885638] brd: module loaded
[ 0.885638] input: Macintosh mouse button emulation as /class/input/input0
[ 0.885638] pnp: the driver 'i8042 kbd' has been registered
[ 0.885638] i8042 kbd 00:0a: driver attached
[ 0.885638] pnp: the driver 'i8042 aux' has been registered
[ 0.885638] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.885638] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.885638] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.906376] mice: PS/2 mouse device common for all mice
[ 0.906376] pnp: the driver 'rtc_cmos' has been registered
[ 0.906376] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.906376] rtc0: alarms up to one year, y3k
[ 0.906376] rtc_cmos 00:05: driver attached
[ 0.906376] cpuidle: using governor ladder
[ 0.906376] cpuidle: using governor menu
[ 0.906376] No iBFT detected.
[ 0.906376] TCP cubic registered
[ 0.906376] NET: Registered protocol family 17
[ 0.906376] registered taskstats version 1
[ 0.906376] rtc_cmos 00:05: setting system clock to 2009年05月25日 18:32:25 UTC (1243276345)
[ 0.906376] Freeing unused kernel memory: 392k freed
[ 0.924238] input: AT Translated Set 2 keyboard as /class/input/input1
[ 0.984097] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.984097] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.250251] Uniform Multi-Platform E-IDE driver
[ 1.250255] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.251304] NFORCE-MCP73: .&checktime(0000,00,08,':').0 (rev a1) UDMA133 controller
[ 1.251304] NFORCE-MCP73: IDE controller (0x10de:0x056c rev 0xa1) at PCI slot .&checktime(0000,00,08,':').0
[ 1.251304] NFORCE-MCP73: not 100% native mode: will probe irqs later
[ 1.251304] NFORCE-MCP73: IDE port disabled
[ 1.251304] ide0: BM-DMA at 0xf000-0xf007
[ 1.251304] Probing IDE interface ide0...
[ 1.301217] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.984824] hda: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive
[ 2.657109] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.657212] hda: UDMA/33 mode selected
[ 2.657375] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.276397] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[ 3.276397] ACPI: PCI Interrupt .&checktime(0000,00,04,':').0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 3.276397] PCI: Setting latency timer of device .&checktime(0000,00,04,':').0 to 64
[ 3.276397] ohci_hcd .&checktime(0000,00,04,':').0: OHCI Host Controller
[ 3.276397] ohci_hcd .&checktime(0000,00,04,':').0: new USB bus registered, assigned bus number 1
[ 3.276397] ohci_hcd .&checktime(0000,00,04,':').0: irq 23, io mem 0xe5108000
[ 3.332030] usb usb1: configuration #1 chosen from 1 choice
[ 3.332054] hub 1-0:1.0: USB hub found
[ 3.332060] hub 1-0:1.0: 10 ports detected
[ 3.447521] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.447523] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.447525] usb usb1: Product: OHCI Host Controller
[ 3.447526] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[ 3.447528] usb usb1: SerialNumber: .&checktime(0000,00,04,':').0
[ 3.449482] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[ 3.449482] ACPI: PCI Interrupt .&checktime(0000,00,04,':').1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 3.449482] PCI: Setting latency timer of device .&checktime(0000,00,04,':').1 to 64
[ 3.449482] ehci_hcd .&checktime(0000,00,04,':').1: EHCI Host Controller
[ 3.449485] ehci_hcd .&checktime(0000,00,04,':').1: new USB bus registered, assigned bus number 2
[ 3.449512] ehci_hcd .&checktime(0000,00,04,':').1: debug port 1
[ 3.449516] PCI: cache line size of 32 is not supported by device .&checktime(0000,00,04,':').1
[ 3.449525] ehci_hcd .&checktime(0000,00,04,':').1: irq 22, io mem 0xe5107000
[ 3.497486] ehci_hcd .&checktime(0000,00,04,':').1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.497571] usb usb2: configuration #1 chosen from 1 choice
[ 3.497605] hub 2-0:1.0: USB hub found
[ 3.497611] hub 2-0:1.0: 10 ports detected
[ 3.600983] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.600985] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.600987] usb usb2: Product: EHCI Host Controller
[ 3.600988] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 3.600989] usb usb2: SerialNumber: .&checktime(0000,00,04,':').1
[ 3.600983] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 3.600983] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 3.600983] ACPI: PCI Interrupt .&checktime(0000,00,0,':')f.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
[ 3.600983] PCI: Setting latency timer of device .&checktime(0000,00,0,':')f.0 to 64
[ 4.571787] forcedeth .&checktime(0000,00,0,':')f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:d0:d3:d5:7f
[ 4.571787] forcedeth .&checktime(0000,00,0,':')f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 4.571787] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 4.571787] ACPI: PCI Interrupt .&checktime(0000,01,07,':').0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[ 4.619785] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e5004000-e50047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.620941] No dock devices found.
[ 4.625370] SCSI subsystem initialized
[ 4.631293] libata version 3.00 loaded.
[ 4.631293] ahci .&checktime(0000,00,0,':')e.0: version 3.0
[ 4.631293] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 4.631293] ACPI: PCI Interrupt .&checktime(0000,00,0,':')e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[ 5.311009] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 5.694895] usb 1-2: configuration #1 chosen from 1 choice
[ 5.710895] usb 1-2: New USB device found, idVendor=045e, idProduct=0084
[ 5.710895] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.710895] usb 1-2: Product: Microsoft Basic Optical Mouse
[ 5.710895] usb 1-2: Manufacturer: Microsoft
[ 5.835553] ahci .&checktime(0000,00,0,':')e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 5.835558] ahci .&checktime(0000,00,0,':')e.0: flags: 64bit sntf led clo pmp pio
[ 5.835564] PCI: Setting latency timer of device .&checktime(0000,00,0,':')e.0 to 64
[ 5.839533] scsi0 : ahci
[ 5.839533] scsi1 : ahci
[ 5.840030] scsi2 : ahci
[ 5.840030] scsi3 : ahci
[ 5.840030] ata1: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104100 irq 1279
[ 5.840030] ata2: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104180 irq 1279
[ 5.840030] ata3: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104200 irq 1279
[ 5.840030] ata4: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104280 irq 1279
[ 6.046020] usb 1-3: new full speed USB device using ohci_hcd and address 3
[ 6.100302] ieee1394: Host added: ID:BUS[0-00:1023] GUID[007fd13300001fd0]
[ 6.313998] usb 1-3: configuration #1 chosen from 1 choice
[ 6.331119] usb 1-3: New USB device found, idVendor=04b8, idProduct=0005
[ 6.331121] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.331123] usb 1-3: Product: USB Printer
[ 6.331124] usb 1-3: Manufacturer: EPSON
[ 6.331125] usb 1-3: SerialNumber: HU33W0510132351290
[ 6.415164] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.418297] ata1.00: HPA detected: current 976771055, native 976773168
[ 6.418304] ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 6.418308] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 6.419237] ata1.00: configured for UDMA/133
[ 6.658190] usb 1-4: new full speed USB device using ohci_hcd and address 4
[ 6.738070] ata2: SATA link down (SStatus 0 SControl 300)
[ 6.910170] usb 1-4: configuration #1 chosen from 1 choice
[ 6.913302] usb 1-4: New USB device found, idVendor=06bd, idProduct=0100
[ 6.913304] usb 1-4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 6.913306] usb 1-4: Product: SnapScan Touch
[ 6.913307] usb 1-4: Manufacturer: Agfa
[ 6.956496] usbcore: registered new interface driver hiddev
[ 6.966064] input: Microsoft Microsoft Basic Optical Mouse as /class/input/input2
[ 6.992165] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse ] on usb-.&checktime(0000,00,04,':').0-2
[ 6.992195] usbcore: registered new interface driver usbhid
[ 6.992197] usbhid: v2.6:USB HID core driver
[ 7.305378] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.306705] ata3.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
[ 7.308093] ata3.00: configured for UDMA/100
[ 7.680038] ata4: SATA link down (SStatus 0 SControl 300)
[ 7.680029] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 7.710744] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7200S 1.06 PQ: 0 ANSI: 5
[ 7.721704] hda: ATAPI 48X DVD-ROM drive, 256kB Cache
[ 7.721704] Uniform CD-ROM driver Revision: 3.20
[ 7.729706] Driver 'sd' needs updating - please use bus_type methods
[ 7.729706] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
[ 7.729706] sd 0:0:0:0: [sda] Write Protect is off
[ 7.729706] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.729706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.729706] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
[ 7.729706] sd 0:0:0:0: [sda] Write Protect is off
[ 7.729706] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.729706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.729706] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 7.741707] sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 7.782387] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.790313] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.790394] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 7.800712] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.800712] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 8.160058] PM: Starting manual resume from disk
[ 8.167963] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 8.167963] EXT3-fs: write access will be enabled during recovery.
[ 9.473177] kjournald starting. Commit interval 5 seconds
[ 9.473177] EXT3-fs: sda2: orphan cleanup on readonly fs
[ 9.473177] ext3_orphan_cleanup: deleting unreferenced inode 1181706
[ 9.473177] ext3_orphan_cleanup: deleting unreferenced inode 293203
[ 9.473177] EXT3-fs: sda2: 2 orphan inodes deleted
[ 9.473177] EXT3-fs: recovery complete.
[ 9.613551] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.542362] udevd version 125 started
[ 11.107362] input: Power Button (FF) as /class/input/input3
[ 11.250057] ACPI: Power Button (FF) [PWRF]
[ 11.250107] input: Power Button (CM) as /class/input/input4
[ 11.312421] ACPI: Power Button (CM) [PWRB]
[ 11.312825] ACPI: WMI: Mapper loaded
[ 11.662308] input: PC Speaker as /class/input/input5
[ 11.698834] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[ 11.698852] usbcore: registered new interface driver usblp
[ 11.759735] pnp: the driver 'parport_pc' has been registered
[ 11.759735] parport_pc 00:09: reported by Plug and Play ACPI
[ 11.759735] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 11.854843] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 11.854843] ACPI: PCI Interrupt .&checktime(0000,00,09,':').0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 11.854843] PCI: Setting latency timer of device .&checktime(0000,00,09,':').0 to 64
[ 11.862928] parport_pc 00:09: driver attached
[ 12.900912] Adding 7815580k swap on /dev/sda5. Priority:-1 extents:1 across:7815580k
[ 13.093147] EXT3 FS on sda2, internal journal
[ 13.947619] loop: module loaded
[ 16.380064] kjournald starting. Commit interval 5 seconds
[ 16.380064] EXT3 FS on sda6, internal journal
[ 16.380064] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.673327] NET: Registered protocol family 10
[ 18.673327] lo: Disabled Privacy Extensions
[ 18.946972] lp0: using parport0 (interrupt-driven).
[ 18.962972] ppdev: user-space parallel port driver
[ 21.302777] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 21.302777] vboxdrv: Successfully done.
[ 21.302777] vboxdrv: Found 2 processor cores.
[ 21.302777] VBoxDrv: dbg - g_abExecMemory=ffffffffa02ddb60
[ 21.302777] vboxdrv: fAsync=0 offMin=0x35f offMax=0xb60
[ 21.302777] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 21.302777] vboxdrv: Successfully loaded version 2.2.2 (interface 0x000a0009).
[ 21.518306] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0478d00
[ 25.014881] nvidia: module license 'NVIDIA' taints kernel.
[ 25.269858] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22
[ 25.269858] ACPI: PCI Interrupt .&checktime(0000,00,10,':').0[A] -> Link [AIGP] -> GSI 22 (level, low) -> IRQ 22
[ 25.269858] PCI: Setting latency timer of device .&checktime(0000,00,10,':').0 to 64
[ 25.269858] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008
[ 41.685843] eth0: no IPv6 routers present
Après mise en veille :
[ 1078.469574] PM: Syncing filesystems ... done.
[ 1078.469574] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 1078.633575] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 1078.633575] Suspending console(s)
[ 1078.633575] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1078.866507] sd 0:0:0:0: [sda] Stopping disk
[ 1079.862597] ACPI handle has no context!
[ 1079.862826] parport_pc 00:09: disabled
[ 1079.863010] serial 00:08: disabled
[ 1079.863067] ACPI handle has no context!
[ 1079.878534] NVRM: RmPowerManagement: 4
[ 1080.246496] ACPI: PCI interrupt for device .&checktime(0000,00,09,':').0 disabled
[ 1080.262654] ACPI: PCI interrupt for device .&checktime(0000,00,04,':').1 disabled
[ 1080.278531] ACPI: PCI interrupt for device .&checktime(0000,00,04,':').0 disabled
[ 1080.295254] ACPI: Preparing to enter system sleep state S3
[ 1080.296414] Disabling non-boot CPUs ...
[ 1080.296425] CPU0 attaching NULL sched-domain.
[ 1080.296428] CPU1 attaching NULL sched-domain.
[ 1080.412109] CPU 1 is now offline
[ 1080.412112] SMP alternatives: switching to UP code
[ 1080.416416] CPU0 attaching sched-domain:
[ 1080.416418] domain 0: span 0
[ 1080.416419] groups: 0
[ 1080.416555] CPU1 is down
[ 1080.416555] Back to C!
[ 1080.418476] Enabling non-boot CPUs ...
[ 1080.418477] CPU0 attaching NULL sched-domain.
[ 1080.428212] SMP alternatives: switching to SMP code
[ 1080.432614] Booting processor 1/1 ip 6000
[ 1080.440085] Initializing CPU#1
[ 1080.440085] Calibrating delay using timer specific routine.. 5000.03 BogoMIPS (lpj=10000076)
[ 1080.440085] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1080.440085] CPU: L2 cache: 2048K
[ 1080.440085] CPU 1/1 -> Node 0
[ 1080.440085] CPU: Physical Processor ID: 0
[ 1080.440085] CPU: Processor Core ID: 1
[ 1080.520326] CPU1: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[ 1080.520344] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 1080.540386] CPU0 attaching sched-domain:
[ 1080.540388] domain 0: span 0-1
[ 1080.540389] groups: 0 1
[ 1080.540391] domain 1: span 0-1
[ 1080.540392] groups: 0-1
[ 1080.540394] CPU1 attaching sched-domain:
[ 1080.540395] domain 0: span 0-1
[ 1080.540396] groups: 1 0
[ 1080.540398] domain 1: span 0-1
[ 1080.540399] groups: 0-1
[ 1080.440085] CPU1 is up
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').0 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').1 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').2 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').3 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').4 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').5 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').6 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,02,':').0 at offset f (was 0, writing ff)
[ 1080.675972] Switched to high resolution mode on CPU 1
[ 1080.688084] ACPI: PCI Interrupt .&checktime(0000,00,04,':').0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 1080.688092] PCI: Setting latency timer of device .&checktime(0000,00,04,':').0 to 64
[ 1080.728020] ACPI: PCI Interrupt .&checktime(0000,00,04,':').1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 1080.728027] PCI: Setting latency timer of device .&checktime(0000,00,04,':').1 to 64
[ 1080.744103] PM: Writing back config space on device .&checktime(0000,00,09,':').0 at offset f (was 5020100, writing 502010b)
[ 1080.744113] PM: Writing back config space on device .&checktime(0000,00,09,':').0 at offset 4 (was 0, writing e5100000)
[ 1080.744117] PM: Writing back config space on device .&checktime(0000,00,09,':').0 at offset 1 (was b00000, writing b00002)
[ 1080.744128] ACPI: PCI Interrupt .&checktime(0000,00,09,':').0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 1080.744132] PCI: Setting latency timer of device .&checktime(0000,00,09,':').0 to 64
[ 1080.832016] PCI: Setting latency timer of device .&checktime(0000,00,0,':')a.0 to 64
[ 1080.847862] PM: Writing back config space on device .&checktime(0000,00,0,':')e.0 at offset 1 (was b00000, writing b00407)
[ 1080.847892] PCI: Setting latency timer of device .&checktime(0000,00,0,':')e.0 to 64
[ 1082.030725] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset f (was 14010100, writing 1401010f)
[ 1082.030737] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset 7 (was 0, writing e5106000)
[ 1082.030742] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset 6 (was 0, writing e510a000)
[ 1082.030747] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset 5 (was 1, writing e001)
[ 1082.030752] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset 4 (was 0, writing e5109000)
[ 1082.030759] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset 1 (was b00000, writing b00007)
[ 1082.031635] NVRM: RmPowerManagement: 5
[ 1082.348773] ata4: SATA link down (SStatus 0 SControl 300)
[ 1082.348784] ata2: SATA link down (SStatus 0 SControl 300)
[ 1082.680773] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1082.684773] ata3.00: configured for UDMA/100
[ 1082.701375] PM: Writing back config space on device .&checktime(0000,01,07,':').0 at offset f (was 4020100, writing 402010a)
[ 1082.701393] PM: Writing back config space on device .&checktime(0000,01,07,':').0 at offset 5 (was 0, writing e5000000)
[ 1082.701400] PM: Writing back config space on device .&checktime(0000,01,07,':').0 at offset 4 (was 0, writing e5004000)
[ 1082.701406] PM: Writing back config space on device .&checktime(0000,01,07,':').0 at offset 3 (was 0, writing 2008)
[ 1082.701413] PM: Writing back config space on device .&checktime(0000,01,07,':').0 at offset 1 (was 2100000, writing 2100006)
[ 1082.751372] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e5004000-e50047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1082.751405] serial 00:08: current resources: pnp_start_dev
[ 1082.751407] serial 00:08: irq 4 flags 0x401
[ 1082.751408] serial 00:08: io 0x3f8-0x3ff flags 0x101
[ 1082.751410] serial 00:08: set resources
[ 1082.751867] serial 00:08: encode 2 resources
[ 1082.751869] serial 00:08: encode io 0x3f8-0x3ff decode 0x1
[ 1082.751871] serial 00:08: encode irq 4 edge high exclusive (2-byte descriptor)
[ 1082.752156] serial 00:08: activated
[ 1082.752161] parport_pc 00:09: current resources: pnp_start_dev
[ 1082.752163] parport_pc 00:09: irq 7 flags 0x401
[ 1082.752164] parport_pc 00:09: dma 3 flags 0x800
[ 1082.752165] parport_pc 00:09: io 0x378-0x37f flags 0x101
[ 1082.752167] parport_pc 00:09: io 0x778-0x77b flags 0x101
[ 1082.752169] parport_pc 00:09: set resources
[ 1082.752720] parport_pc 00:09: encode 4 resources
[ 1082.752721] parport_pc 00:09: encode io 0x378-0x37f decode 0x1
[ 1082.752723] parport_pc 00:09: encode io 0x778-0x77b decode 0x1
[ 1082.752724] parport_pc 00:09: encode irq 7 edge high exclusive (2-byte descriptor)
[ 1082.752726] parport_pc 00:09: encode dma 3 type 0x0 transfer 0x0 master 0
[ 1082.752773] parport_pc 00:09: activated
[ 1082.785049] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 1082.785152] hda: UDMA/33 mode selected
[ 1083.081690] sd 0:0:0:0: [sda] Starting disk
[ 1084.904671] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1084.913155] ata1.00: configured for UDMA/133
[ 1084.936785] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
[ 1084.936785] sd 0:0:0:0: [sda] Write Protect is off
[ 1084.936785] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1084.936785] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1084.936785] Restarting tasks ... done.
PS: Je n'arrive pas à mettre ma citation dans un cadre avec ascenceur...
[^] # Re: Problème de réinitialisation de ton matos
Posté par alfafa . En réponse au message Pb pm-suspend. Évalué à 1.
Module Size Used by
nvidia 8105072 34
i2c_core 27936 1 nvidia
vboxnetflt 91532 0
vboxdrv 1688332 1 vboxnetflt
ppdev 11656 0
lp 14724 0
ipv6 288328 20
cpufreq_conservative 11784 0
cpufreq_stats 9120 0
cpufreq_ondemand 11792 0
cpufreq_powersave 6400 0
cpufreq_userspace 8452 0
freq_table 9344 2 cpufreq_stats,cpufreq_ondemand
sbp2 25356 0
loop 19468 0
snd_hda_intel 436440 4
snd_pcm 81672 2 snd_hda_intel
snd_seq 54304 0
snd_timer 25744 3 snd_pcm,snd_seq
snd_seq_device 11668 1 snd_seq
snd 63688 11 snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
parport_pc 31016 1
parport 41776 3 ppdev,lp,parport_pc
usblp 16896 0
pcspkr 7040 0
soundcore 12064 1 snd
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
wmi 11712 0
button 11680 0
evdev 14208 3
ext3 124944 2
jbd 51240 1 ext3
mbcache 12804 1 ext3
sg 36576 0
sr_mod 19652 0
sd_mod 29376 4
ide_cd_mod 36360 0
cdrom 37928 2 sr_mod,ide_cd_mod
ata_generic 10116 0
ahci 33036 3
libata 165600 2 ata_generic,ahci
scsi_mod 160760 5 sbp2,sg,sr_mod,sd_mod,libata
dock 14112 1 libata
usbhid 45920 0
hid 41664 1 usbhid
ff_memless 9224 1 usbhid
amd74xx 13448 0 [permanent]
ide_pci_generic 9220 0 [permanent]
forcedeth 54032 0
ide_core 128284 3 ide_cd_mod,amd74xx,ide_pci_generic
ohci1394 32692 0
ieee1394 93816 2 sbp2,ohci1394
ehci_hcd 35980 0
ohci_hcd 25092 0
thermal 22816 0
processor 42304 1 thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
Le problème, c'est que je ne trouve pas le module de ma carte réseau.
Ma carte mère est une Gigabyte GA-73PVM-S2H avec une carte réseau intégrée Realtek® RTL8211B.
Voici le dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-15lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed May 13 15:37:46 UTC 2009
[ 0.000000] Command line: root=/dev/sda2 ro quiet vga=791
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077000000 (usable)
[ 0.000000] BIOS-e820: 0000000077000000 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 000000007f000000 - 000000007fde0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e2000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 487424) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 520192, 523744) 2 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F65A0, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 7FEE3040, 0034 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: DSDT 7FEE3180, 5301 (r1 GBT GBTUACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 7FEE1800, 0040
[ 0.000000] ACPI: HPET 7FEE8600, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
[ 0.000000] ACPI: MCFG 7FEE8680, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: APIC 7FEE8500, 0098 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fde0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 487424) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 520192, 523744) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fde0000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff]
[ 0.000000] bootmap [0000000000011000 - 0000000000020fbf] pages 10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [3798d000-37fefc7b] RAMDISK
[ 0.000000] early res: 4 [9f800-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-bfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 487424
[ 0.000000] 0: 520192 -> 523744
[ 0.000000] On node 0 totalpages: 490879
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1244 pages reserved
[ 0.000000] DMA zone: 2699 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7105 pages used for memmap
[ 0.000000] DMA32 zone: 479775 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000077000000 - 000000007f000000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 482474
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda2 ro quiet vga=791
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 2499.999 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 1923388k/2094976k available (2225k kernel code, 40128k reserved, 1080k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083878] Calibrating delay using timer specific routine.. 5005.25 BogoMIPS (lpj=10010512)
[ 0.083915] Security Framework initialized
[ 0.083921] SELinux: Disabled at boot.
[ 0.083924] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 2048K
[ 0.084005] CPU 0/0 -> Node 0
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] CPU0: Thermal monitoring enabled (TM2)
[ 0.084005] using mwait in idle threads.
[ 0.084005] ACPI: Core revision 20080321
[ 0.132008] CPU0: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[ 0.132008] Using local APIC timer interrupts.
[ 0.136008] APIC timer calibration result 12499985
[ 0.136008] Detected 12.499 MHz APIC timer.
[ 0.136008] Booting processor 1/1 ip 6000
[ 0.144009] Initializing CPU#1
[ 0.144009] Calibrating delay using timer specific routine.. 4999.95 BogoMIPS (lpj=9999916)
[ 0.144009] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.144009] CPU: L2 cache: 2048K
[ 0.144009] CPU 1/1 -> Node 0
[ 0.144009] CPU: Physical Processor ID: 0
[ 0.144009] CPU: Processor Core ID: 1
[ 0.144009] CPU1: Thermal monitoring enabled (TM2)
[ 0.224014] CPU1: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[ 0.224014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.228014] Brought up 2 CPUs
[ 0.228014] Total of 2 processors activated (10005.21 BogoMIPS).
[ 0.228014] CPU0 attaching sched-domain:
[ 0.228014] domain 0: span 0-1
[ 0.228014] groups: 0 1
[ 0.228014] domain 1: span 0-1
[ 0.228014] groups: 0-1
[ 0.228014] CPU1 attaching sched-domain:
[ 0.228014] domain 0: span 0-1
[ 0.228014] groups: 1 0
[ 0.228014] domain 1: span 0-1
[ 0.228014] groups: 0-1
[ 0.228014] net_namespace: 1224 bytes
[ 0.228014] Booting paravirtualized kernel on bare hardware
[ 0.228014] NET: Registered protocol family 16
[ 0.228014] ACPI: bus type pci registered
[ 0.228014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 31
[ 0.228014] PCI: MCFG area at e0000000 reserved in E820
[ 0.228014] PCI: Using MMCONFIG at e0000000 - e1ffffff
[ 0.228014] PCI: Using configuration type 1 for base access
[ 0.228014] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.228014] mtrr: probably your BIOS does not setup all CPUs.
[ 0.228014] mtrr: corrected configuration.
[ 0.228014] ACPI: EC: Look up EC in DSDT
[ 0.233960] ACPI: Interpreter enabled
[ 0.233962] ACPI: (supports S0 S3 S4 S5)
[ 0.233975] ACPI: Using IOAPIC for interrupt routing
[ 0.244015] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.244015] PCI: Transparent bridge - .&checktime(0000,00,0,':')a.0
[ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.284017] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284017] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284017] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
[ 0.284017] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284017] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284017] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284017] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284146] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284271] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.284398] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
[ 0.287051] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.287177] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.287307] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.287434] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.287561] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.287687] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.287813] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.287940] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.288069] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.288195] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.288364] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.288524] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.288685] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.288844] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.289004] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.289164] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.289324] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.289484] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.289644] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.289805] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[ 0.289966] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
[ 0.290126] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
[ 0.290287] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
[ 0.290448] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.290612] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.290774] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.290935] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.291096] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.291257] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.291418] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.292372] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.292806] pnp: PnP ACPI init
[ 0.292813] ACPI: bus type pnp registered
[ 0.292873] pnp 00:00: parse allocated resources
[ 0.292952] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.293413] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.293423] pnp 00:01: parse allocated resources
[ 0.293570] pnp 00:01: add io 0x1000-0x107f flags 0x1
[ 0.293572] pnp 00:01: add io 0x1080-0x10ff flags 0x1
[ 0.293574] pnp 00:01: add io 0x1400-0x147f flags 0x1
[ 0.293575] pnp 00:01: add io 0x1480-0x14ff flags 0x1
[ 0.293577] pnp 00:01: add io 0x1800-0x187f flags 0x1
[ 0.293578] pnp 00:01: add io 0x1880-0x18ff flags 0x1
[ 0.293580] pnp 00:01: add mem 0x0-0xffffffffffffffff flags 0x10000001
[ 0.293582] pnp 00:01: add mem 0xfefe0000-0xfefe01ff flags 0x1
[ 0.293583] pnp 00:01: add mem 0xfefe1000-0xfefe10ff flags 0x1
[ 0.293585] pnp 00:01: add mem 0x77000000-0x7effffff flags 0x1
[ 0.293587] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.294050] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294118] pnp 00:02: parse allocated resources
[ 0.294124] pnp 00:02: add io 0x10-0x1f flags 0x1
[ 0.294126] pnp 00:02: add io 0x22-0x3f flags 0x1
[ 0.294127] pnp 00:02: add io 0x44-0x5f flags 0x1
[ 0.294128] pnp 00:02: add io 0x62-0x63 flags 0x1
[ 0.294130] pnp 00:02: add io 0x65-0x6f flags 0x1
[ 0.294131] pnp 00:02: add io 0x74-0x7f flags 0x1
[ 0.294133] pnp 00:02: add io 0x91-0x93 flags 0x1
[ 0.294134] pnp 00:02: add io 0xa2-0xbf flags 0x1
[ 0.294136] pnp 00:02: add io 0xe0-0xef flags 0x1
[ 0.294137] pnp 00:02: add io 0x4d0-0x4d1 flags 0x1
[ 0.294139] pnp 00:02: add io 0x800-0x87f flags 0x1
[ 0.294140] pnp 00:02: add io 0x295-0x314 flags 0x1
[ 0.294142] pnp 00:02: add io 0x290-0x294 flags 0x1
[ 0.294143] pnp 00:02: add io 0x880-0x88f flags 0x1
[ 0.294145] pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.294545] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294545] pnp 00:03: parse allocated resources
[ 0.294545] pnp 00:03: add dma 4 flags 0x4
[ 0.294545] pnp 00:03: add io 0x0-0xf flags 0x1
[ 0.294545] pnp 00:03: add io 0x80-0x90 flags 0x1
[ 0.294545] pnp 00:03: add io 0x94-0x9f flags 0x1
[ 0.294545] pnp 00:03: add io 0xc0-0xdf flags 0x1
[ 0.294545] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.294545] pnp 00:04: parse allocated resources
[ 0.294545] pnp 00:04: add irq 8 flags 0x1
[ 0.294545] pnp 00:04: add mem 0xfeff0000-0xfeff03ff flags 0x1
[ 0.294545] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.294545] pnp 00:05: parse allocated resources
[ 0.294545] pnp 00:05: add io 0x70-0x73 flags 0x1
[ 0.294545] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.294545] pnp 00:06: parse allocated resources
[ 0.294545] pnp 00:06: add io 0x61-0x61 flags 0x1
[ 0.294545] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.294545] pnp 00:07: parse allocated resources
[ 0.294545] pnp 00:07: add io 0xf0-0xff flags 0x1
[ 0.294545] pnp 00:07: add irq 13 flags 0x1
[ 0.294545] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.294545] pnp 00:08: parse allocated resources
[ 0.294545] pnp 00:08: add io 0x3f8-0x3ff flags 0x1
[ 0.294545] pnp 00:08: add irq 4 flags 0x1
[ 0.294545] pnp 00:08: parse resource options
[ 0.294545] pnp 00:08: new independent option
[ 0.294545] pnp 00:08: new dependent option (priority 0x1)
[ 0.294545] pnp 00:08: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:08: new dependent option (priority 0x1)
[ 0.294545] pnp 00:08: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:08: new dependent option (priority 0x1)
[ 0.294545] pnp 00:08: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:08: new dependent option (priority 0x1)
[ 0.294545] pnp 00:08: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:08: end dependent options
[ 0.294545] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.294545] pnp 00:09: parse allocated resources
[ 0.294545] pnp 00:09: add io 0x378-0x37f flags 0x1
[ 0.294545] pnp 00:09: add io 0x778-0x77b flags 0x1
[ 0.294545] pnp 00:09: add irq 7 flags 0x1
[ 0.294545] pnp 00:09: add dma 3 flags 0x0
[ 0.294545] pnp 00:09: parse resource options
[ 0.294545] pnp 00:09: new independent option
[ 0.294545] pnp 00:09: new dependent option (priority 0x1)
[ 0.294545] pnp 00:09: io min 0x378 max 0x378 align 0 size 8 flags 0x1
[ 0.294545] pnp 00:09: io min 0x778 max 0x778 align 0 size 4 flags 0x1
[ 0.294545] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:09: dma bitmask 0xb flags 0x0
[ 0.294545] pnp 00:09: new dependent option (priority 0x1)
[ 0.294545] pnp 00:09: io min 0x278 max 0x278 align 0 size 8 flags 0x1
[ 0.294545] pnp 00:09: io min 0x678 max 0x678 align 0 size 4 flags 0x1
[ 0.294545] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ ? 0.294545] pnp 00:09: dma bitmask 0xb flags 0x0
[ 0.294545] pnp 00:09: new dependent option (priority 0x1)
[ 0.294545] pnp 00:09: io min 0x3bc max 0x3bc align 0 size 4 flags 0x1
[ 0.294545] pnp 00:09: io min 0x7bc max 0x7bc align 0 size 4 flags 0x1
[ 0.294545] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.294545] pnp 00:09: dma bitmask 0xb flags 0x0
[ 0.294545] pnp 00:09: end dependent options
[ 0.294545] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.294545] pnp 00:0a: parse allocated resources
[ 0.294545] pnp 00:0a: add io 0x60-0x60 flags 0x1
[ 0.294545] pnp 00:0a: add io 0x64-0x64 flags 0x1
[ 0.294545] pnp 00:0a: add irq 1 flags 0x1
[ 0.294545] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.295978] pnp 00:0b: parse allocated resources
[ 0.296014] pnp 00:0b: add mem 0xe0000000-0xe1ffffff flags 0x1
[ 0.296017] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.296488] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296497] pnp 00:0c: parse allocated resources
[ 0.296677] pnp 00:0c: add mem 0xcde00-0xcffff flags 0x1
[ 0.296679] pnp 00:0c: add mem 0xf0000-0xf7fff flags 0x1
[ 0.296680] pnp 00:0c: add mem 0xf8000-0xfbfff flags 0x1
[ 0.296682] pnp 00:0c: add mem 0xfc000-0xfffff flags 0x1
[ 0.296684] pnp 00:0c: add mem 0x7fee0000-0x7fefffff flags 0x1
[ 0.296685] pnp 00:0c: add mem 0xffff0000-0xffffffff flags 0x1
[ 0.296687] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1
[ 0.296688] pnp 00:0c: add mem 0x100000-0x7fedffff flags 0x1
[ 0.296690] pnp 00:0c: add mem 0xfec00000-0xfec00fff flags 0x1
[ 0.296692] pnp 00:0c: add mem 0xfee00000-0xfee00fff flags 0x1
[ 0.296693] pnp 00:0c: add mem 0xfeff0000-0xfeff03ff flags 0x1
[ 0.296696] pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.297168] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.297175] pnp: PnP ACPI: found 13 devices
[ 0.297176] ACPI: ACPI bus type pnp unregistered
[ 0.298545] usbcore: registered new interface driver usbfs
[ 0.298545] usbcore: registered new interface driver hub
[ 0.298545] usbcore: registered new device driver usb
[ 0.298545] PCI: Using ACPI for IRQ routing
[ 0.316990] PCI-GART: No AMD northbridge found.
[ 0.316998] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.317004] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.318059] ACPI: RTC can wake from S4
[ 0.332944] pnp: the driver 'system' has been registered
[ 0.332958] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.332963] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.332967] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.332971] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.332975] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.332979] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.332985] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
[ 0.332989] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
[ 0.332994] system 00:01: iomem range 0x77000000-0x7effffff could not be reserved
[ 0.332997] system 00:01: driver attached
[ 0.333005] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.333009] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.333013] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.333017] system 00:02: ioport range 0x290-0x294 has been reserved
[ 0.333021] system 00:02: ioport range 0x880-0x88f has been reserved
[ 0.333025] system 00:02: driver attached
[ 0.333039] system 00:0b: iomem range 0xe0000000-0xe1ffffff could not be reserved
[ 0.333042] system 00:0b: driver attached
[ 0.333053] system 00:0c: iomem range 0xcde00-0xcffff has been reserved
[ 0.333055] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.333057] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.333059] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.333061] system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.333063] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.333065] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.333067] system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.333069] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.333072] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.333074] system 00:0c: iomem range 0xfeff0000-0xfeff03ff could not be reserved
[ 0.333075] system 00:0c: driver attached
[ 0.334549] PCI: Bridge: .&checktime(0000,00,0,':')a.0
[ 0.334549] IO window: disabled.
[ 0.334549] MEM window: 0xe5000000-0xe50fffff
[ 0.334549] PREFETCH window: disabled.
[ 0.334549] PCI: Setting latency timer of device .&checktime(0000,00,0,':')a.0 to 64
[ 0.334549] NET: Registered protocol family 2
[ 0.370138] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.370676] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.370676] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.370676] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.370676] TCP reno registered
[ 0.379259] NET: Registered protocol family 1
[ 0.379354] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.506908] Switched to high resolution mode on CPU 0
[ 0.594553] it is
[ 0.820639] Freeing initrd memory: 6539k freed
[ 0.825095] audit: initializing netlink socket (disabled)
[ 0.825095] type=2000 audit(1243276344.816:1): initialized
[ 0.825095] Total HugeTLB memory allocated, 0
[ 0.825095] VFS: Disk quotas dquot_6.5.1
[ 0.825095] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.825095] msgmni has been set to 3769
[ 0.825095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.825095] io scheduler noop registered
[ 0.825095] io scheduler anticipatory registered
[ 0.825095] io scheduler deadline registered
[ 0.825095] io scheduler cfq registered (default)
[ 0.853594] pci .&checktime(0000,00,10,':').0: Boot video device
[ 0.856597] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20002980000, using 3072k, total 131072k
[ 0.856597] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 0.856597] vesafb: scrolling: redraw
[ 0.856597] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.869095] Console: switching to colour frame buffer device 128x48
[ 0.881607] fb0: VESA VGA frame buffer device
[ 0.881607] hpet_resources: 0xfeff0000 is busy
[ 0.881607] Linux agpgart interface v0.103
[ 0.881607] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.881682] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.885637] pnp: the driver 'serial' has been registered
[ 0.885637] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.885637] serial 00:08: driver attached
[ 0.885638] brd: module loaded
[ 0.885638] input: Macintosh mouse button emulation as /class/input/input0
[ 0.885638] pnp: the driver 'i8042 kbd' has been registered
[ 0.885638] i8042 kbd 00:0a: driver attached
[ 0.885638] pnp: the driver 'i8042 aux' has been registered
[ 0.885638] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.885638] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.885638] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.906376] mice: PS/2 mouse device common for all mice
[ 0.906376] pnp: the driver 'rtc_cmos' has been registered
[ 0.906376] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.906376] rtc0: alarms up to one year, y3k
[ 0.906376] rtc_cmos 00:05: driver attached
[ 0.906376] cpuidle: using governor ladder
[ 0.906376] cpuidle: using governor menu
[ 0.906376] No iBFT detected.
[ 0.906376] TCP cubic registered
[ 0.906376] NET: Registered protocol family 17
[ 0.906376] registered taskstats version 1
[ 0.906376] rtc_cmos 00:05: setting system clock to 2009年05月25日 18:32:25 UTC (1243276345)
[ 0.906376] Freeing unused kernel memory: 392k freed
[ 0.924238] input: AT Translated Set 2 keyboard as /class/input/input1
[ 0.984097] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.984097] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.250251] Uniform Multi-Platform E-IDE driver
[ 1.250255] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.251304] NFORCE-MCP73: .&checktime(0000,00,08,':').0 (rev a1) UDMA133 controller
[ 1.251304] NFORCE-MCP73: IDE controller (0x10de:0x056c rev 0xa1) at PCI slot .&checktime(0000,00,08,':').0
[ 1.251304] NFORCE-MCP73: not 100% native mode: will probe irqs later
[ 1.251304] NFORCE-MCP73: IDE port disabled
[ 1.251304] ide0: BM-DMA at 0xf000-0xf007
[ 1.251304] Probing IDE interface ide0...
[ 1.301217] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.984824] hda: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive
[ 2.657109] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.657212] hda: UDMA/33 mode selected
[ 2.657375] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.276397] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[ 3.276397] ACPI: PCI Interrupt .&checktime(0000,00,04,':').0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 3.276397] PCI: Setting latency timer of device .&checktime(0000,00,04,':').0 to 64
[ 3.276397] ohci_hcd .&checktime(0000,00,04,':').0: OHCI Host Controller
[ 3.276397] ohci_hcd .&checktime(0000,00,04,':').0: new USB bus registered, assigned bus number 1
[ 3.276397] ohci_hcd .&checktime(0000,00,04,':').0: irq 23, io mem 0xe5108000
[ 3.332030] usb usb1: configuration #1 chosen from 1 choice
[ 3.332054] hub 1-0:1.0: USB hub found
[ 3.332060] hub 1-0:1.0: 10 ports detected
[ 3.447521] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.447523] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.447525] usb usb1: Product: OHCI Host Controller
[ 3.447526] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[ 3.447528] usb usb1: SerialNumber: .&checktime(0000,00,04,':').0
[ 3.449482] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[ 3.449482] ACPI: PCI Interrupt .&checktime(0000,00,04,':').1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 3.449482] PCI: Setting latency timer of device .&checktime(0000,00,04,':').1 to 64
[ 3.449482] ehci_hcd .&checktime(0000,00,04,':').1: EHCI Host Controller
[ 3.449485] ehci_hcd .&checktime(0000,00,04,':').1: new USB bus registered, assigned bus number 2
[ 3.449512] ehci_hcd .&checktime(0000,00,04,':').1: debug port 1
[ 3.449516] PCI: cache line size of 32 is not supported by device .&checktime(0000,00,04,':').1
[ 3.449525] ehci_hcd .&checktime(0000,00,04,':').1: irq 22, io mem 0xe5107000
[ 3.497486] ehci_hcd .&checktime(0000,00,04,':').1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.497571] usb usb2: configuration #1 chosen from 1 choice
[ 3.497605] hub 2-0:1.0: USB hub found
[ 3.497611] hub 2-0:1.0: 10 ports detected
[ 3.600983] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.600985] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.600987] usb usb2: Product: EHCI Host Controller
[ 3.600988] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 3.600989] usb usb2: SerialNumber: .&checktime(0000,00,04,':').1
[ 3.600983] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 3.600983] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 3.600983] ACPI: PCI Interrupt .&checktime(0000,00,0,':')f.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
[ 3.600983] PCI: Setting latency timer of device .&checktime(0000,00,0,':')f.0 to 64
[ 4.571787] forcedeth .&checktime(0000,00,0,':')f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:d0:d3:d5:7f
[ 4.571787] forcedeth .&checktime(0000,00,0,':')f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 4.571787] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 4.571787] ACPI: PCI Interrupt .&checktime(0000,01,07,':').0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[ 4.619785] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e5004000-e50047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.620941] No dock devices found.
[ 4.625370] SCSI subsystem initialized
[ 4.631293] libata version 3.00 loaded.
[ 4.631293] ahci .&checktime(0000,00,0,':')e.0: version 3.0
[ 4.631293] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 4.631293] ACPI: PCI Interrupt .&checktime(0000,00,0,':')e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[ 5.311009] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 5.694895] usb 1-2: configuration #1 chosen from 1 choice
[ 5.710895] usb 1-2: New USB device found, idVendor=045e, idProduct=0084
[ 5.710895] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.710895] usb 1-2: Product: Microsoft Basic Optical Mouse
[ 5.710895] usb 1-2: Manufacturer: Microsoft
[ 5.835553] ahci .&checktime(0000,00,0,':')e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 5.835558] ahci .&checktime(0000,00,0,':')e.0: flags: 64bit sntf led clo pmp pio
[ 5.835564] PCI: Setting latency timer of device .&checktime(0000,00,0,':')e.0 to 64
[ 5.839533] scsi0 : ahci
[ 5.839533] scsi1 : ahci
[ 5.840030] scsi2 : ahci
[ 5.840030] scsi3 : ahci
[ 5.840030] ata1: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104100 irq 1279
[ 5.840030] ata2: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104180 irq 1279
[ 5.840030] ata3: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104200 irq 1279
[ 5.840030] ata4: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104280 irq 1279
[ 6.046020] usb 1-3: new full speed USB device using ohci_hcd and address 3
[ 6.100302] ieee1394: Host added: ID:BUS[0-00:1023] GUID[007fd13300001fd0]
[ 6.313998] usb 1-3: configuration #1 chosen from 1 choice
[ 6.331119] usb 1-3: New USB device found, idVendor=04b8, idProduct=0005
[ 6.331121] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.331123] usb 1-3: Product: USB Printer
[ 6.331124] usb 1-3: Manufacturer: EPSON
[ 6.331125] usb 1-3: SerialNumber: HU33W0510132351290
[ 6.415164] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.418297] ata1.00: HPA detected: current 976771055, native 976773168
[ 6.418304] ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 6.418308] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 6.419237] ata1.00: configured for UDMA/133
[ 6.658190] usb 1-4: new full speed USB device using ohci_hcd and address 4
[ 6.738070] ata2: SATA link down (SStatus 0 SControl 300)
[ 6.910170] usb 1-4: configuration #1 chosen from 1 choice
[ 6.913302] usb 1-4: New USB device found, idVendor=06bd, idProduct=0100
[ 6.913304] usb 1-4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 6.913306] usb 1-4: Product: SnapScan Touch
[ 6.913307] usb 1-4: Manufacturer: Agfa
[ 6.956496] usbcore: registered new interface driver hiddev
[ 6.966064] input: Microsoft Microsoft Basic Optical Mouse as /class/input/input2
[ 6.992165] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse ] on usb-.&checktime(0000,00,04,':').0-2
[ 6.992195] usbcore: registered new interface driver usbhid
[ 6.992197] usbhid: v2.6:USB HID core driver
[ 7.305378] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.306705] ata3.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
[ 7.308093] ata3.00: configured for UDMA/100
[ 7.680038] ata4: SATA link down (SStatus 0 SControl 300)
[ 7.680029] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 7.710744] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7200S 1.06 PQ: 0 ANSI: 5
[ 7.721704] hda: ATAPI 48X DVD-ROM drive, 256kB Cache
[ 7.721704] Uniform CD-ROM driver Revision: 3.20
[ 7.729706] Driver 'sd' needs updating - please use bus_type methods
[ 7.729706] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
[ 7.729706] sd 0:0:0:0: [sda] Write Protect is off
[ 7.729706] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.729706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.729706] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
[ 7.729706] sd 0:0:0:0: [sda] Write Protect is off
[ 7.729706] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.729706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.729706] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 7.741707] sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 7.782387] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.790313] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.790394] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 7.800712] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.800712] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 8.160058] PM: Starting manual resume from disk
[ 8.167963] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 8.167963] EXT3-fs: write access will be enabled during recovery.
[ 9.473177] kjournald starting. Commit interval 5 seconds
[ 9.473177] EXT3-fs: sda2: orphan cleanup on readonly fs
[ 9.473177] ext3_orphan_cleanup: deleting unreferenced inode 1181706
[ 9.473177] ext3_orphan_cleanup: deleting unreferenced inode 293203
[ 9.473177] EXT3-fs: sda2: 2 orphan inodes deleted
[ 9.473177] EXT3-fs: recovery complete.
[ 9.613551] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.542362] udevd version 125 started
[ 11.107362] input: Power Button (FF) as /class/input/input3
[ 11.250057] ACPI: Power Button (FF) [PWRF]
[ 11.250107] input: Power Button (CM) as /class/input/input4
[ 11.312421] ACPI: Power Button (CM) [PWRB]
[ 11.312825] ACPI: WMI: Mapper loaded
[ 11.662308] input: PC Speaker as /class/input/input5
[ 11.698834] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[ 11.698852] usbcore: registered new interface driver usblp
[ 11.759735] pnp: the driver 'parport_pc' has been registered
[ 11.759735] parport_pc 00:09: reported by Plug and Play ACPI
[ 11.759735] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 11.854843] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 11.854843] ACPI: PCI Interrupt .&checktime(0000,00,09,':').0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 11.854843] PCI: Setting latency timer of device .&checktime(0000,00,09,':').0 to 64
[ 11.862928] parport_pc 00:09: driver attached
[ 12.900912] Adding 7815580k swap on /dev/sda5. Priority:-1 extents:1 across:7815580k
[ 13.093147] EXT3 FS on sda2, internal journal
[ 13.947619] loop: module loaded
[ 16.380064] kjournald starting. Commit interval 5 seconds
[ 16.380064] EXT3 FS on sda6, internal journal
[ 16.380064] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.673327] NET: Registered protocol family 10
[ 18.673327] lo: Disabled Privacy Extensions
[ 18.946972] lp0: using parport0 (interrupt-driven).
[ 18.962972] ppdev: user-space parallel port driver
[ 21.302777] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 21.302777] vboxdrv: Successfully done.
[ 21.302777] vboxdrv: Found 2 processor cores.
[ 21.302777] VBoxDrv: dbg - g_abExecMemory=ffffffffa02ddb60
[ 21.302777] vboxdrv: fAsync=0 offMin=0x35f offMax=0xb60
[ 21.302777] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 21.302777] vboxdrv: Successfully loaded version 2.2.2 (interface 0x000a0009).
[ 21.518306] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0478d00
[ 25.014881] nvidia: module license 'NVIDIA' taints kernel.
[ 25.269858] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22
[ 25.269858] ACPI: PCI Interrupt .&checktime(0000,00,10,':').0[A] -> Link [AIGP] -> GSI 22 (level, low) -> IRQ 22
[ 25.269858] PCI: Setting latency timer of device .&checktime(0000,00,10,':').0 to 64
[ 25.269858] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008
[ 41.685843] eth0: no IPv6 routers present
Après mise en veille :
[ 1078.469574] PM: Syncing filesystems ... done.
[ 1078.469574] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 1078.633575] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 1078.633575] Suspending console(s)
[ 1078.633575] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1078.866507] sd 0:0:0:0: [sda] Stopping disk
[ 1079.862597] ACPI handle has no context!
[ 1079.862826] parport_pc 00:09: disabled
[ 1079.863010] serial 00:08: disabled
[ 1079.863067] ACPI handle has no context!
[ 1079.878534] NVRM: RmPowerManagement: 4
[ 1080.246496] ACPI: PCI interrupt for device .&checktime(0000,00,09,':').0 disabled
[ 1080.262654] ACPI: PCI interrupt for device .&checktime(0000,00,04,':').1 disabled
[ 1080.278531] ACPI: PCI interrupt for device .&checktime(0000,00,04,':').0 disabled
[ 1080.295254] ACPI: Preparing to enter system sleep state S3
[ 1080.296414] Disabling non-boot CPUs ...
[ 1080.296425] CPU0 attaching NULL sched-domain.
[ 1080.296428] CPU1 attaching NULL sched-domain.
[ 1080.412109] CPU 1 is now offline
[ 1080.412112] SMP alternatives: switching to UP code
[ 1080.416416] CPU0 attaching sched-domain:
[ 1080.416418] domain 0: span 0
[ 1080.416419] groups: 0
[ 1080.416555] CPU1 is down
[ 1080.416555] Back to C!
[ 1080.418476] Enabling non-boot CPUs ...
[ 1080.418477] CPU0 attaching NULL sched-domain.
[ 1080.428212] SMP alternatives: switching to SMP code
[ 1080.432614] Booting processor 1/1 ip 6000
[ 1080.440085] Initializing CPU#1
[ 1080.440085] Calibrating delay using timer specific routine.. 5000.03 BogoMIPS (lpj=10000076)
[ 1080.440085] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1080.440085] CPU: L2 cache: 2048K
[ 1080.440085] CPU 1/1 -> Node 0
[ 1080.440085] CPU: Physical Processor ID: 0
[ 1080.440085] CPU: Processor Core ID: 1
[ 1080.520326] CPU1: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[ 1080.520344] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 1080.540386] CPU0 attaching sched-domain:
[ 1080.540388] domain 0: span 0-1
[ 1080.540389] groups: 0 1
[ 1080.540391] domain 1: span 0-1
[ 1080.540392] groups: 0-1
[ 1080.540394] CPU1 attaching sched-domain:
[ 1080.540395] domain 0: span 0-1
[ 1080.540396] groups: 1 0
[ 1080.540398] domain 1: span 0-1
[ 1080.540399] groups: 0-1
[ 1080.440085] CPU1 is up
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').0 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').1 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').2 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').3 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').4 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').5 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,01,':').6 at offset f (was 0, writing ff)
[ 1080.440085] PM: Writing back config space on device .&checktime(0000,00,02,':').0 at offset f (was 0, writing ff)
[ 1080.675972] Switched to high resolution mode on CPU 1
[ 1080.688084] ACPI: PCI Interrupt .&checktime(0000,00,04,':').0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 1080.688092] PCI: Setting latency timer of device .&checktime(0000,00,04,':').0 to 64
[ 1080.728020] ACPI: PCI Interrupt .&checktime(0000,00,04,':').1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 1080.728027] PCI: Setting latency timer of device .&checktime(0000,00,04,':').1 to 64
[ 1080.744103] PM: Writing back config space on device .&checktime(0000,00,09,':').0 at offset f (was 5020100, writing 502010b)
[ 1080.744113] PM: Writing back config space on device .&checktime(0000,00,09,':').0 at offset 4 (was 0, writing e5100000)
[ 1080.744117] PM: Writing back config space on device .&checktime(0000,00,09,':').0 at offset 1 (was b00000, writing b00002)
[ 1080.744128] ACPI: PCI Interrupt .&checktime(0000,00,09,':').0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 1080.744132] PCI: Setting latency timer of device .&checktime(0000,00,09,':').0 to 64
[ 1080.832016] PCI: Setting latency timer of device .&checktime(0000,00,0,':')a.0 to 64
[ 1080.847862] PM: Writing back config space on device .&checktime(0000,00,0,':')e.0 at offset 1 (was b00000, writing b00407)
[ 1080.847892] PCI: Setting latency timer of device .&checktime(0000,00,0,':')e.0 to 64
[ 1082.030725] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset f (was 14010100, writing 1401010f)
[ 1082.030737] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset 7 (was 0, writing e5106000)
[ 1082.030742] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset 6 (was 0, writing e510a000)
[ 1082.030747] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset 5 (was 1, writing e001)
[ 1082.030752] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset 4 (was 0, writing e5109000)
[ 1082.030759] PM: Writing back config space on device .&checktime(0000,00,0,':')f.0 at offset 1 (was b00000, writing b00007)
[ 1082.031635] NVRM: RmPowerManagement: 5
[ 1082.348773] ata4: SATA link down (SStatus 0 SControl 300)
[ 1082.348784] ata2: SATA link down (SStatus 0 SControl 300)
[ 1082.680773] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1082.684773] ata3.00: configured for UDMA/100
[ 1082.701375] PM: Writing back config space on device .&checktime(0000,01,07,':').0 at offset f (was 4020100, writing 402010a)
[ 1082.701393] PM: Writing back config space on device .&checktime(0000,01,07,':').0 at offset 5 (was 0, writing e5000000)
[ 1082.701400] PM: Writing back config space on device .&checktime(0000,01,07,':').0 at offset 4 (was 0, writing e5004000)
[ 1082.701406] PM: Writing back config space on device .&checktime(0000,01,07,':').0 at offset 3 (was 0, writing 2008)
[ 1082.701413] PM: Writing back config space on device .&checktime(0000,01,07,':').0 at offset 1 (was 2100000, writing 2100006)
[ 1082.751372] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e5004000-e50047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1082.751405] serial 00:08: current resources: pnp_start_dev
[ 1082.751407] serial 00:08: irq 4 flags 0x401
[ 1082.751408] serial 00:08: io 0x3f8-0x3ff flags 0x101
[ 1082.751410] serial 00:08: set resources
[ 1082.751867] serial 00:08: encode 2 resources
[ 1082.751869] serial 00:08: encode io 0x3f8-0x3ff decode 0x1
[ 1082.751871] serial 00:08: encode irq 4 edge high exclusive (2-byte descriptor)
[ 1082.752156] serial 00:08: activated
[ 1082.752161] parport_pc 00:09: current resources: pnp_start_dev
[ 1082.752163] parport_pc 00:09: irq 7 flags 0x401
[ 1082.752164] parport_pc 00:09: dma 3 flags 0x800
[ 1082.752165] parport_pc 00:09: io 0x378-0x37f flags 0x101
[ 1082.752167] parport_pc 00:09: io 0x778-0x77b flags 0x101
[ 1082.752169] parport_pc 00:09: set resources
[ 1082.752720] parport_pc 00:09: encode 4 resources
[ 1082.752721] parport_pc 00:09: encode io 0x378-0x37f decode 0x1
[ 1082.752723] parport_pc 00:09: encode io 0x778-0x77b decode 0x1
[ 1082.752724] parport_pc 00:09: encode irq 7 edge high exclusive (2-byte descriptor)
[ 1082.752726] parport_pc 00:09: encode dma 3 type 0x0 transfer 0x0 master 0
[ 1082.752773] parport_pc 00:09: activated
[ 1082.785049] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 1082.785152] hda: UDMA/33 mode selected
[ 1083.081690] sd 0:0:0:0: [sda] Starting disk
[ 1084.904671] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1084.913155] ata1.00: configured for UDMA/133
[ 1084.936785] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
[ 1084.936785] sd 0:0:0:0: [sda] Write Protect is off
[ 1084.936785] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1084.936785] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1084.936785] Restarting tasks ... done.
PS: Je n'arrive pas à mettre ma citation dans un cadre avec ascenceur...