• [^] # Re: irq et firmware...

    Posté par . En réponse au message Freeze dy system et swap tainted : ça recomence. Évalué à 2.

    Alors CD/DVD ?
    résultat de demsg | grep irq
    [ 0.000000] Command line: root=UUID=ccaa8dcf-c4ae-4e59-a88a-fba14cff828a ro quiet splash irqpoll
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] Kernel command line: root=UUID=ccaa8dcf-c4ae-4e59-a88a-fba14cff828a ro quiet splash irqpoll
    [ 30.217496] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    [ 30.798154] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 30.798471] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 30.798964] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 30.799022] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 32.008531] uhci_hcd .&checktime(0000,00,1,':')a.0: irq 16, io base 0x0000e000
    [ 32.113728] uhci_hcd .&checktime(0000,00,1,':')a.1: irq 21, io base 0x0000e100
    [ 32.215554] uhci_hcd .&checktime(0000,00,1,':')a.2: irq 18, io base 0x0000e500
    [ 32.319428] uhci_hcd .&checktime(0000,00,1,':')d.0: irq 23, io base 0x0000e200
    [ 32.423343] uhci_hcd .&checktime(0000,00,1,':')d.1: irq 19, io base 0x0000e300
    [ 32.527219] uhci_hcd .&checktime(0000,00,1,':')d.2: irq 18, io base 0x0000e400
    [ 32.636275] ehci_hcd .&checktime(0000,00,1,':')a.7: irq 18, io mem 0xf9201000
    [ 32.759780] ehci_hcd .&checktime(0000,00,1,':')d.7: irq 23, io mem 0xf9200000
    [ 32.988013] ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
    [ 32.988015] ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
    [ 35.048363] ata3: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202100 irq 506
    [ 35.048365] ata4: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202180 irq 506
    [ 35.048367] ata5: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202200 irq 506
    [ 35.048369] ata6: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202280 irq 506
    [ 35.048370] ata7: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202300 irq 506
    [ 35.048372] ata8: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202380 irq 506
    [ 38.828291] ata9: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000100 irq 19
    [ 38.828293] ata10: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000180 irq 19
    [ 50.388197] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]


    Dans ma séquence de démarrage : il semble que ce sont mes lecteurs de CD/DVD
    May 20 20:03:31 Syrion kernel: [ 32.987687] scsi0 : pata_jmicron
    May 20 20:03:31 Syrion kernel: [ 32.987710] scsi1 : pata_jmicron
    May 20 20:03:31 Syrion kernel: [ 32.988013] ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
    May 20 20:03:31 Syrion kernel: [ 32.988015] ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
    May 20 20:03:31 Syrion kernel: [ 33.470400] ata1.00: ATAPI: PHILIPS DVDR824P, P2.2, max UDMA/33
    May 20 20:03:31 Syrion kernel: [ 33.470409] ata1.01: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-116 0122, E1.22, max UDMA/66
    May 20 20:03:31 Syrion kernel: [ 33.642225] ata1.00: configured for UDMA/33
    May 20 20:03:31 Syrion kernel: [ 33.729382] usb 6-1: new full speed USB device using uhci_hcd and address 3
    May 20 20:03:31 Syrion kernel: [ 33.814325] ata1.01: configured for UDMA/66
    May 20 20:03:31 Syrion kernel: [ 33.879988] usb 6-1: configuration #1 chosen from 1 choice
    May 20 20:03:31 Syrion kernel: [ 33.882944] hub 6-1:1.0: USB hub found
    May 20 20:03:31 Syrion kernel: [ 33.884921] hub 6-1:1.0: 4 ports detected
    May 20 20:03:31 Syrion kernel: [ 33.982547] scsi 0:0:0:0: CD-ROM PHILIPS DVDR824P P2.2 PQ: 0 ANSI: 5
    May 20 20:03:31 Syrion kernel: [ 33.983796] scsi 0:0:1:0: CD-ROM PIONEER DVD-ROM DVD-116 1.22 PQ: 0 ANSI: 5
    Alors que les disques sont sur une autre irq
    May 20 20:03:31 Syrion kernel: [ 35.048363] ata3: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202100 irq 506
    May 20 20:03:31 Syrion kernel: [ 35.048365] ata4: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202180 irq 506
    May 20 20:03:31 Syrion kernel: [ 35.048367] ata5: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202200 irq 506
    May 20 20:03:31 Syrion kernel: [ 35.048369] ata6: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202280 irq 506
    May 20 20:03:31 Syrion kernel: [ 35.048370] ata7: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202300 irq 506
    May 20 20:03:31 Syrion kernel: [ 35.048372] ata8: SATA max UDMA/133 abar m2048@0xf9202000 port 0xf9202380 irq 506
    May 20 20:03:31 Syrion kernel: [ 35.687361] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    May 20 20:03:31 Syrion kernel: [ 35.876343] ata3.00: HPA unlocked: 488395055 -> 488397168, native 488397168
    May 20 20:03:31 Syrion kernel: [ 35.876347] ata3.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133
    May 20 20:03:31 Syrion kernel: [ 35.876349] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    May 20 20:03:31 Syrion kernel: [ 35.909555] ata3.00: configured for UDMA/133
    May 20 20:03:31 Syrion kernel: [ 36.546472] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    May 20 20:03:31 Syrion kernel: [ 36.547297] ata4.00: ATA-7: ST3250823AS, 3.01, max UDMA/133
    May 20 20:03:31 Syrion kernel: [ 36.547300] ata4.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    May 20 20:03:31 Syrion kernel: [ 36.548171] ata4.00: configured for UDMA/133
    May 20 20:03:31 Syrion kernel: [ 36.866142] ata5: SATA link down (SStatus 0 SControl 300)
    May 20 20:03:31 Syrion kernel: [ 37.185810] ata6: SATA link down (SStatus 0 SControl 300)
    May 20 20:03:31 Syrion kernel: [ 37.505483] ata7: SATA link down (SStatus 0 SControl 300)
    May 20 20:03:31 Syrion kernel: [ 37.825149] ata8: SATA link down (SStatus 0 SControl 300)
    May 20 20:03:31 Syrion kernel: [ 37.825222] scsi 2:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5
    May 20 20:03:31 Syrion kernel: [ 37.825295] scsi 3:0:0:0: Direct-Access ATA ST3250823AS 3.01 PQ: 0 ANSI: 5
    May 20 20:03:31 Syrion kernel: [ 37.825339] ACPI: PCI Interrupt .&checktime(0000,03,00,':').0[A] -> GSI 19 (level, low) -> IRQ 19
    May 20 20:03:31 Syrion kernel: [ 38.828132] ahci .&checktime(0000,03,00,':').0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    May 20 20:03:31 Syrion kernel: [ 38.828136] ahci .&checktime(0000,03,00,':').0: flags: 64bit ncq pm led clo pmp pio slum part

    Par contre pourquoi est-ce que le pb n'arrive que quand le swap est activé ?