Re: il faut construire les module avant...

Bonjour,

J'ai pu installer le module rt2500 mais je ne vois rien en faisant iwconfig . Ci-dessous les résultats des quelques commandes :
[root@localhost] /home/zephyr # modprobe -r rt2500

[root@localhost] /home/zephyr # modprobe rt2500

[root@localhost] /home/zephyr # dmesg | tail -n 30
EXT3 FS on hdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ntfs: Ignoring new-style parameters in presence of obsolete ones
NTFS driver 2.1.22 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
loop: loaded (max 8 devices)
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 1984kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=5 option
and report if it works on your machine.
For more details, read ALSA-Configuration.txt.
PCI: Via IRQ fixup for .&checktime(0000,00,11,':').5, from 5 to 6
PCI: Setting latency timer of device .&checktime(0000,00,11,':').5 to 64
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03c5760(lo)
IPv6 over IPv4 tunneling driver
[drm] Initialized drm 1.0.0 20040925
[drm] Initialized radeon 1.16.0 20050311 on minor 0:
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_unlock] *ERROR* Process 2841 using kernel context 0
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xe097af00, 00:e0:7d:e3:90:96, IRQ 17
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
***********************************************************************
[root@localhost] /home/zephyr # iwconfig
lo no wireless extensions.

sit0 no wireless extensions.

eth0 no wireless extensions.
***********************************************************************
et le lsmod qui met toujours l'état du rt2500 à 0
[root@localhost] /home/zephyr # lsmod
Module Size Used by
rt2500 181828 0
8139too 21760 0
mii 4704 1 8139too
radeon 76672 0
drm 60404 1 radeon
md5 3584 1
ipv6 234016 8
autofs4 14884 0
raw 6592 2
snd_seq_dummy 2532 0
snd_seq_oss 31136 0
snd_seq_midi_event 5696 1 snd_seq_oss
snd_seq 46960 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 48960 0
snd_mixer_oss 16896 2 snd_pcm_oss
snd_via82xx 24256 1
gameport 11112 1 snd_via82xx
snd_ac97_codec 83900 1 snd_via82xx
snd_pcm 79784 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer 20548 2 snd_seq,snd_pcm
snd_page_alloc 8392 2 snd_via82xx,snd_pcm
snd_mpu401_uart 5664 1 snd_via82xx
snd_rawmidi 19616 1 snd_mpu401_uart
snd_seq_device 6828 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd 46116 11 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,s
nd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_
device
af_packet 16392 2
floppy 55444 0
ide_cd 37988 0
loop 14504 0
nls_cp850 4480 1
vfat 10592 1
fat 45980 1 vfat
nls_iso8859_15 4224 2
ntfs 212792 1
via_agp 7584 1
agpgart 29032 2 drm,via_agp
saa7134 102612 0
video_buf 17060 1 saa7134
v4l2_common 4640 1 saa7134
v4l1_compat 12900 1 saa7134
soundcore 7008 3 snd,saa7134
i2c_core 17360 1 saa7134
ir_common 6084 1 saa7134
videodev 7104 1 saa7134
tsdev 5984 0
ehci_hcd 29192 0
uhci_hcd 29136 0
usbcore 108348 3 ehci_hcd,uhci_hcd
evdev 7648 0
ext3 124744 2
jbd 48568 1 ext3
**********************************************************************

Par drakconf, j'ai avancé d'un pas : il propose des options en installant rt2500 802.11 b/g mais quoi que je mette, il me fait une boucle sur le même écran :-(

Là, ce que je ne comprends pas, c'est pourquoi iwconfig ne voit rien alors que le rt2500 figure bien dans lsmod