Posté par geehale (envoyer un message privé) le 16/11/2004 à 09:46. (lien). Évalué à 1.
Il faut démonter le CD depuis K3b dans le menu
contextuel (bouton droit) correspondant au graveur
de la liste des dossiers.
Bizarement, il ne le fait pas lui-même !
J'ai réussi à graver une fois mais maintenant je ne peux plus lire les donner du cbrom et j'obtiens au autre mesage d'erreur :
impossible de monter le péripherique ; l'erreur signalée est = mount not a directory
System
-----------------------
K3b Version:0.11.16
KDE Version: 3.2.3
QT Version: 3.3.3
cdrecord
-----------------------
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'DVD-ROM SD-R5112'
Revision : '1030'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0008
Profile: 0x0010
Profile: 0x0008 (current)
Profile: 0x0009
Profile: 0x000A
Profile: 0x0011
Profile: 0x0013
Profile: 0x0014
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1605888 = 1568 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Drive needs to reload the media to return to proper status.
/usr/bin/cdrecord: Cannot get next writable address for 'invisible' track.
/usr/bin/cdrecord: This means that we are checking recorded media.
/usr/bin/cdrecord: This media cannot be written in streaming mode anymore.
/usr/bin/cdrecord: If you like to write to 'preformatted' RW media, try to blank the media first.
Track 01: data 1 MB
Total size: 1 MB (00:07.42) = 557 sectors
Lout start: 1 MB (00:09/32) = 557 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -12520 (97:15/05)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 26
Manufacturer: TDK Corporation
Trying to clear drive status.
Speed set to 2822 KB/s
Speed set to 2822 KB/s
Starting to write CD/DVD at speed 16.0 in real TAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Writing time: 0.042s
Average write speed 531.1x.
Fixating...
Fixating time: 0.002s
/usr/bin/cdrecord: Success. read track info: scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 0
resid: 28
cmd finished after 0.001s timeout 240s
/usr/bin/cdrecord: Cannot get next writable address for 'invisible' track.
/usr/bin/cdrecord: This means that we are checking recorded media.
/usr/bin/cdrecord: This media cannot be written in streaming mode anymore.
/usr/bin/cdrecord: If you like to write to 'preformatted' RW media, try to blank the media first.
/usr/bin/cdrecord: Cannot get next writable address.
/usr/bin/cdrecord: fifo had 18 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
mkisofs
-----------------------
555
Total translation table size: 0
Total rockridge attributes bytes: 247
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 21000
555 extents written (1 MB)
mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR VERSION 0.11.16 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer K3b - Version 0.11.16 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-domi/k3bq4xx8b.tmp -rational-rock -hide-list /tmp/kde-domi/k3b0SXx8b.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-domi/k3bAeCEib.tmp /home/domi/.kde/share/apps/k3b/temp/dummydir0/
[^] # Re: Solution
Posté par dominique . En réponse au message K3B et MDK 10.1. Évalué à 1.
Posté par geehale (envoyer un message privé) le 16/11/2004 à 09:46. (lien). Évalué à 1.
Il faut démonter le CD depuis K3b dans le menu
contextuel (bouton droit) correspondant au graveur
de la liste des dossiers.
Bizarement, il ne le fait pas lui-même !
J'ai réussi à graver une fois mais maintenant je ne peux plus lire les donner du cbrom et j'obtiens au autre mesage d'erreur :
impossible de monter le péripherique ; l'erreur signalée est = mount not a directory
System
-----------------------
K3b Version:0.11.16
KDE Version: 3.2.3
QT Version: 3.3.3
cdrecord
-----------------------
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'DVD-ROM SD-R5112'
Revision : '1030'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0008
Profile: 0x0010
Profile: 0x0008 (current)
Profile: 0x0009
Profile: 0x000A
Profile: 0x0011
Profile: 0x0013
Profile: 0x0014
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1605888 = 1568 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Drive needs to reload the media to return to proper status.
/usr/bin/cdrecord: Cannot get next writable address for 'invisible' track.
/usr/bin/cdrecord: This means that we are checking recorded media.
/usr/bin/cdrecord: This media cannot be written in streaming mode anymore.
/usr/bin/cdrecord: If you like to write to 'preformatted' RW media, try to blank the media first.
Track 01: data 1 MB
Total size: 1 MB (00:07.42) = 557 sectors
Lout start: 1 MB (00:09/32) = 557 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -12520 (97:15/05)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 26
Manufacturer: TDK Corporation
Trying to clear drive status.
Speed set to 2822 KB/s
Speed set to 2822 KB/s
Starting to write CD/DVD at speed 16.0 in real TAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Writing time: 0.042s
Average write speed 531.1x.
Fixating...
Fixating time: 0.002s
/usr/bin/cdrecord: Success. read track info: scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 0
resid: 28
cmd finished after 0.001s timeout 240s
/usr/bin/cdrecord: Cannot get next writable address for 'invisible' track.
/usr/bin/cdrecord: This means that we are checking recorded media.
/usr/bin/cdrecord: This media cannot be written in streaming mode anymore.
/usr/bin/cdrecord: If you like to write to 'preformatted' RW media, try to blank the media first.
/usr/bin/cdrecord: Cannot get next writable address.
/usr/bin/cdrecord: fifo had 18 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdd speed=16 -tao driveropts=burnfree -eject -data -tsize=555s -
mkisofs
-----------------------
555
Total translation table size: 0
Total rockridge attributes bytes: 247
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 21000
555 extents written (1 MB)
mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR VERSION 0.11.16 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer K3b - Version 0.11.16 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-domi/k3bq4xx8b.tmp -rational-rock -hide-list /tmp/kde-domi/k3b0SXx8b.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-domi/k3bAeCEib.tmp /home/domi/.kde/share/apps/k3b/temp/dummydir0/
je galere...et je suis perdu.