• [^] # Re: Affichage ?

    Posté par . En réponse au message pourquoi Linux Mint 22.1 fonctionne tres bien en live et tres tres lentement en dur ?. Évalué à 1.

    Merci ! J'ai acheté cet ordi à JustItGood. J'en avais commander un autre moins costaud où Linux Mint 22.1 s'est installé sans problème ! Mais il avait un port USB cassé. Ils me l'ont changé sans problème en me proposant un plus costaud parce qu'ils n'en avaient plus de l'autre. J'ai accepté bien évidemment !

    Il ne veut pas du smartctl --all /dev/sda et me propose un help... que j'ai fait.
    Plein de possibilité. à tout hasard, j'ai fait celui-là (qui se rapproche le plus :o) )

    sudo smartctl --all /dev/sda

    smartctl 7.4 2023年08月01日 r5530 x86_64-linux-6.14.0-27-generic
    Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

    === START OF INFORMATION SECTION ===
    Model Family: Toshiba 2.5" HDD MQ04UBF... (USB 3.0)
    Device Model: TOSHIBA MQ04UBF100
    Serial Number: 90O1T090T
    LU WWN Device Id: 0 000000 000000000
    Firmware Version: JU003U
    User Capacity: 1 000 204 886 016 bytes [1,00 TB]
    Sector Sizes: 512 bytes logical, 4096 bytes physical
    Rotation Rate: 5400 rpm
    Form Factor: 2.5 inches
    Zoned Device: Device managed zones
    Device is: In smartctl database 7.3/5528
    ATA Version is: ACS-3 T13/2161-D revision 5
    SATA Version is: SATA 3.3, 3.0 Gb/s (current: 3.0 Gb/s)
    Local Time is: Wed Aug 13 10:48:30 2025 CEST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 120) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 174) minutes.
    SCT capabilities: (0x003d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
    2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
    3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 2460
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 16356
    5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 1
    7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
    8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
    9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 18128
    10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1519
    191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 17
    192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 405
    193 Load_Cycle_Count 0x0032 095 095 000 Old_age Always - 53587
    194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 35 (Min/Max 11/44)
    196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
    197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
    222 Loaded_Hours 0x0032 099 099 000 Old_age Always - 427
    223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
    226 Load-in_Time 0x0026 100 100 000 Old_age Always - 283
    240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    No self-tests have been logged. [To run self-tests, use: smartctl -t]

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

    The above only provides legacy SMART information - try 'smartctl -x' for more