• [^] # Re: Log

    Posté par . En réponse au message Disque dur qui change d'ID. Évalué à 1.

    Et la sortie (tronquée) de dmesg.

    [ 1.346622] md: md0 stopped.
    [ 1.349973] md: bind
    [ 1.350107] md: bind
    [ 1.350262] md: bind
    [ 1.350386] md: bind
    [ 1.350399] md: kicking non-fresh sdd1 from array!
    [ 1.350402] md: unbind

    [ 1.369737] md: export_rdev(sdd1)

    [ 1.445777] raid6: sse2x1 10049 MB/s
    [ 1.446300] EXT4-fs (sda1): re-mounted. Opts: user_xattr,errors=remount-ro,commit=300,barrier

    [ 1.513821] raid6: sse2x2 12339 MB/s
    [ 1.581884] raid6: sse2x4 13218 MB/s
    [ 1.581885] raid6: using algorithm sse2x4 (13218 MB/s)
    [ 1.581886] raid6: using ssse3x2 recovery algorithm

    [ 1.661979] xor: using function: prefetch64-sse (15506.000 MB/sec)
    [ 1.665195] md: raid6 personality registered for level 6
    [ 1.665197] md: raid5 personality registered for level 5
    [ 1.665198] md: raid4 personality registered for level 4
    [ 1.665653] md/raid:md0: device sdb1 operational as raid disk 0
    [ 1.665655] md/raid:md0: device sde1 operational as raid disk 3
    [ 1.665656] md/raid:md0: device sdc1 operational as raid disk 1
    [ 1.665862] md/raid:md0: allocated 0kB
    [ 1.665936] md/raid:md0: raid level 5 active with 3 out of 4 devices, algorithm 2
    [ 1.666042] RAID conf printout:
    [ 1.666044] --- level:5 rd:4 wd:3
    [ 1.666045] disk 0, o:1, dev:sdb1
    [ 1.666046] disk 1, o:1, dev:sdc1
    [ 1.666046] disk 3, o:1, dev:sde1
    [ 1.666251] created bitmap (44 pages) for device md0
    [ 1.667120] md0: bitmap initialized from disk: read 3 pages, set 1 of 89423 bits
    [ 1.691878] md0: detected capacity change from 0 to 18003117735936
    [ 1.700797] md0: p1

    [ 3.144729] EXT4-fs (md0p1): mounted filesystem with ordered data mode. Opts: user_xattr,errors=remount-ro,commit=60,barrier

    [ 5119.583230] md: bind
    [ 5119.651398] RAID conf printout:
    [ 5119.651402] --- level:5 rd:4 wd:3
    [ 5119.651405] disk 0, o:1, dev:sdb1
    [ 5119.651407] disk 1, o:1, dev:sdc1
    [ 5119.651409] disk 2, o:1, dev:sdd1
    [ 5119.651411] disk 3, o:1, dev:sde1
    [ 5119.651531] md: recovery of RAID array md0
    [ 5119.651534] md: minimum guaranteed speed: 1000 KB/sec/disk.
    [ 5119.651536] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
    [ 5119.651539] md: using 128k window, over a total of 5860389888k.
    [ 5120.297413] md: md0: recovery done.
    [ 5120.434313] RAID conf printout:
    [ 5120.434318] --- level:5 rd:4 wd:4
    [ 5120.434322] disk 0, o:1, dev:sdb1
    [ 5120.434324] disk 1, o:1, dev:sdc1
    [ 5120.434326] disk 2, o:1, dev:sdd1
    [ 5120.434329] disk 3, o:1, dev:sde1
    [ 5585.595365] EXT4-fs (md0p1): mounted filesystem with ordered data mode. Opts: user_xattr,errors=remount-ro,commit=60,barrier
    [13275.995059] ata5.00: exception Emask 0x52 SAct 0x20000000 SErr 0x400c01 action 0x6 frozen
    [13275.995081] ata5.00: irq_stat 0x08000000, interface fatal error
    [13275.995095] ata5: SError: { RecovData Proto HostInt Handshk }
    [13275.995111] ata5.00: failed command: READ FPDMA QUEUED
    [13275.995125] ata5.00: cmd 60/00:e8:00:4f:06/01:00:e6:00:00/40 tag 29 ncq 131072 in
    res 40/00:e8:00:4f:06/00:00:e6:00:00/40 Emask 0x52 (ATA bus error)
    [13275.995159] ata5.00: status: { DRDY }
    [13275.995169] ata5: hard resetting link
    [13276.315487] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [13276.317272] ata5.00: configured for UDMA/133
    [13276.317278] ata5: EH complete
    [13305.669128] ata5.00: exception Emask 0x52 SAct 0x4000 SErr 0x400c01 action 0x6 frozen
    [13305.669146] ata5.00: irq_stat 0x08000000, interface fatal error
    [13305.669159] ata5: SError: { RecovData Proto HostInt Handshk }
    [13305.669172] ata5.00: failed command: READ FPDMA QUEUED
    [13305.669185] ata5.00: cmd 60/80:70:00:16:f1/00:00:e5:00:00/40 tag 14 ncq 65536 in
    res 40/00:70:00:16:f1/00:00:e5:00:00/40 Emask 0x52 (ATA bus error)
    [13305.669215] ata5.00: status: { DRDY }
    [13305.669224] ata5: hard resetting link
    [13305.989604] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [13305.991407] ata5.00: configured for UDMA/133
    [13305.991414] ata5: EH complete
    [13438.778600] ata5.00: exception Emask 0x52 SAct 0x400000 SErr 0x400c01 action 0x6 frozen
    [13438.778641] ata5.00: irq_stat 0x0c000000, interface fatal error
    [13438.778674] ata5: SError: { RecovData Proto HostInt Handshk }
    [13438.778708] ata5.00: failed command: READ FPDMA QUEUED
    [13438.778742] ata5.00: cmd 60/00:b0:00:10:21/01:00:e6:00:00/40 tag 22 ncq 131072 in
    res 40/00:b0:00:10:21/00:00:e6:00:00/40 Emask 0x52 (ATA bus error)
    [13438.778847] ata5.00: status: { DRDY }
    [13438.778876] ata5: hard resetting link
    [13439.098927] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [13439.100929] ata5.00: configured for UDMA/133
    [13439.100936] ata5: EH complete
    [13442.361819] ata5: limiting SATA link speed to 1.5 Gbps
    [13442.361824] ata5.00: exception Emask 0x52 SAct 0x8 SErr 0x400c01 action 0x6 frozen
    [13442.361876] ata5.00: irq_stat 0x08000000, interface fatal error
    [13442.361907] ata5: SError: { RecovData Proto HostInt Handshk }
    [13442.361938] ata5.00: failed command: READ FPDMA QUEUED
    [13442.361970] ata5.00: cmd 60/00:18:00:06:2a/01:00:e6:00:00/40 tag 3 ncq 131072 in
    res 40/00:18:00:06:2a/00:00:e6:00:00/40 Emask 0x52 (ATA bus error)
    [13442.362069] ata5.00: status: { DRDY }
    [13442.362097] ata5: hard resetting link
    [13442.682094] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [13442.684378] ata5.00: configured for UDMA/133
    [13442.684385] ata5: EH complete
    [32837.723041] Peer 62.235.169.7:34364/57170 unexpectedly shrunk window 654345481:654345545 (repaired)
    [43158.662052] perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
    [44421.529747] Peer 91.179.23.164:31553/32950 unexpectedly shrunk window 1077027531:1077027595 (repaired)
    [47876.484438] ata5.00: exception Emask 0x52 SAct 0x800000 SErr 0x400c01 action 0x6 frozen
    [47876.484497] ata5.00: irq_stat 0x08000000, interface fatal error
    [47876.484531] ata5: SError: { RecovData Proto HostInt Handshk }
    [47876.484565] ata5.00: failed command: READ FPDMA QUEUED
    [47876.484599] ata5.00: cmd 60/00:b8:00:1e:f9/01:00:e0:01:00/40 tag 23 ncq 131072 in
    res 40/00:b8:00:1e:f9/00:00:e0:01:00/40 Emask 0x52 (ATA bus error)
    [47876.484704] ata5.00: status: { DRDY }
    [47876.484733] ata5: hard resetting link
    [47876.804743] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [47876.806699] ata5.00: configured for UDMA/133
    [47876.806706] ata5: EH complete
    [47876.820755] ata5.00: exception Emask 0x52 SAct 0x6000000 SErr 0x400c01 action 0x6 frozen
    [47876.820800] ata5.00: irq_stat 0x08000000, interface fatal error
    [47876.820827] ata5: SError: { RecovData Proto HostInt Handshk }
    [47876.820853] ata5.00: failed command: READ FPDMA QUEUED
    [47876.820879] ata5.00: cmd 60/00:c8:00:1f:f9/02:00:e0:01:00/40 tag 25 ncq 262144 in
    res 40/00:c8:00:1f:f9/00:00:e0:01:00/40 Emask 0x52 (ATA bus error)
    [47876.820963] ata5.00: status: { DRDY }
    [47876.820984] ata5.00: failed command: READ FPDMA QUEUED
    [47876.821009] ata5.00: cmd 60/00:d0:00:22:f9/01:00:e0:01:00/40 tag 26 ncq 131072 in
    res 40/00:c8:00:1f:f9/00:00:e0:01:00/40 Emask 0x52 (ATA bus error)
    [47876.821093] ata5.00: status: { DRDY }
    [47876.821115] ata5: hard resetting link
    [47877.141037] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [47877.143145] ata5.00: configured for UDMA/133
    [47877.143153] ata5: EH complete
    [47880.644427] ata5.00: exception Emask 0x50 SAct 0x1c SErr 0x4490801 action 0xe frozen
    [47880.644472] ata5.00: irq_stat 0x04400040, connection status changed
    [47880.644499] ata5: SError: { RecovData HostInt PHYRdyChg 10B8B Handshk DevExch }
    [47880.644542] ata5.00: failed command: READ FPDMA QUEUED
    [47880.644567] ata5.00: cmd 60/00:10:00:ff:fb/01:00:e0:01:00/40 tag 2 ncq 131072 in
    res 40/00:20:00:0a:fc/00:00:e0:01:00/40 Emask 0x50 (ATA bus error)
    [47880.644651] ata5.00: status: { DRDY }
    [47880.644672] ata5.00: failed command: READ FPDMA QUEUED
    [47880.644697] ata5.00: cmd 60/00:18:00:07:fc/02:00:e0:01:00/40 tag 3 ncq 262144 in
    res 40/00:20:00:0a:fc/00:00:e0:01:00/40 Emask 0x50 (ATA bus error)
    [47880.644780] ata5.00: status: { DRDY }
    [47880.644802] ata5.00: failed command: READ FPDMA QUEUED
    [47880.644827] ata5.00: cmd 60/00:20:00:0a:fc/01:00:e0:01:00/40 tag 4 ncq 131072 in
    res 40/00:20:00:0a:fc/00:00:e0:01:00/40 Emask 0x50 (ATA bus error)
    [47880.644910] ata5.00: status: { DRDY }
    [47880.644933] ata5: hard resetting link
    [47881.368776] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [47881.384148] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
    [47881.384151] ata5.00: revalidation failed (errno=-5)
    [47886.373407] ata5: hard resetting link
    [47888.591395] ata5: SATA link down (SStatus 1 SControl 310)
    [47888.593035] ata5: hard resetting link
    [47890.809184] ata5: SATA link down (SStatus 1 SControl 310)
    [47890.809189] ata5.00: disabled
    [47890.809201] sd 4:0:0:0: [sdd]
    [47890.809202] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [47890.809203] sd 4:0:0:0: [sdd]
    [47890.809204] Sense Key : Aborted Command [current] [descriptor]
    [47890.809206] Descriptor sense data with sense descriptors (in hex):
    [47890.809206] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 01
    [47890.809211] e0 fc 0a 00
    [47890.809212] sd 4:0:0:0: [sdd]
    [47890.809213] Add. Sense: No additional sense information
    [47890.809214] sd 4:0:0:0: [sdd] CDB:
    [47890.809215] Read(16): 88 00 00 00 00 01 e0 fb ff 00 00 00 01 00 00 00
    [47890.809220] end_request: I/O error, dev sdd, sector 8069578496
    [47890.809258] sd 4:0:0:0: [sdd]
    [47890.809259] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [47890.809260] sd 4:0:0:0: [sdd]
    [47890.809260] Sense Key : Aborted Command [current] [descriptor]
    [47890.809262] Descriptor sense data with sense descriptors (in hex):
    [47890.809262] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 01
    [47890.809266] e0 fc 0a 00
    [47890.809268] sd 4:0:0:0: [sdd]
    [47890.809269] Add. Sense: No additional sense information
    [47890.809270] sd 4:0:0:0: [sdd] CDB:
    [47890.809270] Read(16): 88 00 00 00 00 01 e0 fc 07 00 00 00 02 00 00 00
    [47890.809274] end_request: I/O error, dev sdd, sector 8069580544
    [47890.809303] sd 4:0:0:0: [sdd]
    [47890.809304] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [47890.809305] sd 4:0:0:0: [sdd]
    [47890.809305] Sense Key : Aborted Command [current] [descriptor]
    [47890.809306] Descriptor sense data with sense descriptors (in hex):
    [47890.809307] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 01
    [47890.809311] e0 fc 0a 00
    [47890.809313] sd 4:0:0:0: [sdd]
    [47890.809313] Add. Sense: No additional sense information
    [47890.809314] sd 4:0:0:0: [sdd] CDB:
    [47890.809315] Read(16): 88 00 00 00 00
    [47890.809317] sd 4:0:0:0: rejecting I/O to offline device
    [47890.809324] sd 4:0:0:0: rejecting I/O to offline device
    [47890.809352] sd 4:0:0:0: rejecting I/O to offline device
    [47890.809377] sd 4:0:0:0: rejecting I/O to offline device
    [47890.809403] sd 4:0:0:0: rejecting I/O to offline device
    [47890.809429] sd 4:0:0:0: rejecting I/O to offline device
    [47890.809454] sd 4:0:0:0: rejecting I/O to offline device
    [47890.809484] 01 e0 fc 0a 00 00 00 01 00 00 00
    [47890.809487] end_request: I/O error, dev sdd, sector 8069581312
    [47890.809518] ata5: EH complete
    [47890.809524] ata5.00: detaching (SCSI 4:0:0:0)
    [47890.810360] end_request: I/O error, dev sdd, sector 2064
    [47890.810388] md: super_written gets error=-5, uptodate=0
    [47890.810390] md/raid:md0: Disk failure on sdd1, disabling device.
    md/raid:md0: Operation continuing on 3 devices.
    [47890.810551] sd 4:0:0:0: [sdd] Synchronizing SCSI cache
    [47890.810567] sd 4:0:0:0: [sdd]
    [47890.810568] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [47890.810569] sd 4:0:0:0: [sdd] Stopping disk
    [47890.810572] sd 4:0:0:0: [sdd] START_STOP FAILED
    [47890.810573] sd 4:0:0:0: [sdd]
    [47890.810573] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [47890.820266] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
    [47890.820310] ata5: irq_stat 0x00000040, connection status changed
    [47890.820336] ata5: SError: { CommWake DevExch }
    [47890.820361] ata5: hard resetting link
    [47891.002595] RAID conf printout:
    [47891.002599] --- level:5 rd:4 wd:3
    [47891.002601] disk 0, o:1, dev:sdb1
    [47891.002615] disk 1, o:1, dev:sdc1
    [47891.002616] disk 2, o:0, dev:sdd1
    [47891.002617] disk 3, o:1, dev:sde1
    [47891.017318] RAID conf printout:
    [47891.017335] --- level:5 rd:4 wd:3
    [47891.017337] disk 0, o:1, dev:sdb1
    [47891.017338] disk 1, o:1, dev:sdc1
    [47891.017339] disk 3, o:1, dev:sde1
    [47893.051031] ata5: SATA link down (SStatus 1 SControl 300)
    [47893.051038] ata5: EH complete
    [47893.060686] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
    [47893.060729] ata5: irq_stat 0x00000040, connection status changed
    [47893.060766] ata5: SError: { CommWake DevExch }
    [47893.060791] ata5: limiting SATA link speed to 1.5 Gbps
    [47893.060793] ata5: hard resetting link
    [47895.288999] ata5: SATA link down (SStatus 1 SControl 310)
    [47895.289006] ata5: EH complete
    [47895.290356] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
    [47895.290418] ata5: irq_stat 0x00000040, connection status changed
    [47895.290444] ata5: SError: { CommWake DevExch }
    [47895.290473] ata5: limiting SATA link speed to 1.5 Gbps
    [47895.290474] ata5: hard resetting link
    [47897.518995] ata5: SATA link down (SStatus 1 SControl 310)
    [47897.519002] ata5: EH complete
    [47897.520372] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
    [47897.520418] ata5: irq_stat 0x00000040, connection status changed
    [47897.520445] ata5: SError: { CommWake DevExch }
    [47897.520474] ata5: limiting SATA link speed to 1.5 Gbps
    [47897.520475] ata5: hard resetting link
    [47899.756984] ata5: SATA link down (SStatus 1 SControl 310)
    [47899.756997] ata5: EH complete
    [47899.761507] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
    [47899.761563] ata5: irq_stat 0x00000040, connection status changed
    [47899.761597] ata5: SError: { CommWake DevExch }
    [47899.761633] ata5: limiting SATA link speed to 1.5 Gbps
    [47899.761636] ata5: hard resetting link
    [47901.990938] ata5: SATA link down (SStatus 1 SControl 310)
    [47901.990946] ata5: EH complete
    [47901.992304] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
    [47901.992363] ata5: irq_stat 0x00000040, connection status changed
    [47901.992390] ata5: SError: { CommWake DevExch }
    [47901.992419] ata5: limiting SATA link speed to 1.5 Gbps
    [47901.992421] ata5: hard resetting link
    [47904.220851] ata5: COMRESET failed (errno=-32)
    [47904.220878] ata5: reset failed (errno=-32), retrying in 8 secs
    [47911.999727] ata5: hard resetting link
    [47913.396947] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [47913.512030] ata5.00: ATA-10: ST6000VN0021-1ZA17Z, SC61, max UDMA/133
    [47913.512033] ata5.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [47913.516401] ata5.00: configured for UDMA/133
    [47913.516407] ata5: EH complete
    [47913.516464] scsi 4:0:0:0: Direct-Access ATA ST6000VN0021-1ZA SC61 PQ: 0 ANSI: 5
    [47913.516614] sd 4:0:0:0: [sdf] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
    [47913.516616] sd 4:0:0:0: [sdf] 4096-byte physical blocks
    [47913.516686] sd 4:0:0:0: [sdf] Write Protect is off
    [47913.516689] sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
    [47913.516698] sd 4:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [47913.516794] sd 4:0:0:0: Attached scsi generic sg3 type 0
    [47913.573790] sdf: sdf1
    [47913.574088] sd 4:0:0:0: [sdf] Attached SCSI disk
    [47913.637189] ata5.00: exception Emask 0x52 SAct 0x380 SErr 0x400c01 action 0x6 frozen
    [47913.637233] ata5.00: irq_stat 0x0c000000, interface fatal error
    [47913.637259] ata5: SError: { RecovData Proto HostInt Handshk }
    [47913.637286] ata5.00: failed command: READ FPDMA QUEUED
    [47913.637312] ata5.00: cmd 60/08:38:10:00:00/00:00:00:00:00/40 tag 7 ncq 4096 in
    res 40/00:40:40:00:00/00:00:00:00:00/40 Emask 0x52 (ATA bus error)
    [47913.637395] ata5.00: status: { DRDY }
    [47913.637423] ata5.00: failed command: READ FPDMA QUEUED
    [47913.637448] ata5.00: cmd 60/38:40:40:00:00/00:00:00:00:00/40 tag 8 ncq 28672 in
    res 40/00:40:40:00:00/00:00:00:00:00/40 Emask 0x52 (ATA bus error)
    [47913.637531] ata5.00: status: { DRDY }
    [47913.637553] ata5.00: failed command: READ FPDMA QUEUED
    [47913.637588] ata5.00: cmd 60/80:48:80:00:00/01:00:00:00:00/40 tag 9 ncq 196608 in
    res 40/00:40:40:00:00/00:00:00:00:00/40 Emask 0x52 (ATA bus error)
    [47913.637671] ata5.00: status: { DRDY }
    [47913.637694] ata5: hard resetting link
    [47913.957440] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [47913.959447] ata5.00: configured for UDMA/133
    [47913.959453] ata5: EH complete
    [47944.148114] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x400001 action 0x6 frozen
    [47944.148173] ata5: SError: { RecovData Handshk }
    [47944.148197] ata5.00: failed command: READ FPDMA QUEUED
    [47944.148223] ata5.00: cmd 60/08:00:90:03:00/00:00:00:00:00/40 tag 0 ncq 4096 in
    res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [47944.148305] ata5.00: status: { DRDY }
    [47944.148328] ata5: hard resetting link
    [47944.468373] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [47944.470091] ata5.00: configured for UDMA/133
    [47944.470097] ata5: EH complete

    [86631.258712] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [86631.258743] ata5.00: failed command: SMART
    [86631.258767] ata5.00: cmd b0/d4:00:82:4f:c2/00:00:00:00:00/00 tag 16
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [86631.258834] ata5.00: status: { DRDY }
    [86631.258857] ata5: hard resetting link
    [86631.579011] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [86631.581116] ata5.00: configured for UDMA/133
    [86631.581125] ata5: EH complete