Re: Précisions: Smartctl

Apparement, l'output de cette commande a changé:

root@NOTKALI:/mnt/boot# smartctl -a /dev/sdb
smartctl 6.4 2015年06月04日 r4109 [x86_64-linux-4.3.0-kali1-amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: LITEON IT SMS-128L9M
Serial Number: 002504133515
LU WWN Device Id: 5 002303 1003a7c53
Add. Product Id: RM702060
Firmware Version: RM70206
User Capacity: 128.035.676.160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jun 19 17:45:48 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
 was never started.
 Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
 without error or no self-test has ever 
 been run.
Total time to complete Offline 
data collection: ( 10) seconds.
Offline data collection
capabilities: (0x15) SMART execute Offline immediate.
 No Auto Offline data collection support.
 Abort Offline collection upon new
 command.
 No Offline surface scan supported.
 Self-test supported.
 No Conveyance Self-test supported.
 No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
 power-saving mode.
 Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
 General Purpose Logging supported.
Short self-test routine 
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.
 SCT Error Recovery Control supported.
 SCT Feature Control supported.
 SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
 5 Reallocated_Sector_Ct 0x0003 100 100 000 Pre-fail Always - 0
 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 1038
 12 Power_Cycle_Count 0x0003 100 100 000 Pre-fail Always - 367
170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 24
171 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 1
172 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 0
173 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 68
174 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 31
175 Program_Fail_Count_Chip 0x0003 100 100 000 Pre-fail Always - 1
176 Erase_Fail_Count_Chip 0x0003 100 100 000 Pre-fail Always - 0
177 Wear_Leveling_Count 0x0003 100 100 000 Pre-fail Always - 70462
178 Used_Rsvd_Blk_Cnt_Chip 0x0003 100 100 000 Pre-fail Always - 2
179 Used_Rsvd_Blk_Cnt_Tot 0x0003 100 100 000 Pre-fail Always - 24
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 000 Pre-fail Always - 656
181 Program_Fail_Cnt_Total 0x0003 100 100 000 Pre-fail Always - 1
182 Erase_Fail_Count_Total 0x0003 100 100 000 Pre-fail Always - 0
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 088 088 000 Pre-fail Always - 12
187 Reported_Uncorrect 0x0003 100 100 000 Pre-fail Always - 23
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0003 100 100 000 Pre-fail Always - 31
195 Hardware_ECC_Recovered 0x0003 100 100 000 Pre-fail Always - 0
196 Reallocated_Event_Count 0x0003 100 100 000 Pre-fail Always - 24
198 Offline_Uncorrectable 0x0003 100 100 000 Pre-fail Always - 3
199 UDMA_CRC_Error_Count 0x0003 100 100 000 Pre-fail Always - 0
232 Available_Reservd_Space 0x0003 097 097 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0003 100 100 000 Pre-fail Always - 3170
241 Total_LBAs_Written 0x0003 100 100 000 Pre-fail Always - 50725
242 Total_LBAs_Read 0x0003 100 100 000 Pre-fail Always - 43371
SMART Error Log Version: 1
Warning: ATA error count 0 inconsistent with error log pointer 2
ATA Error Count: 0
 CR = Command Register [HEX]
 FR = Features Register [HEX]
 SC = Sector Count Register [HEX]
 SN = Sector Number Register [HEX]
 CL = Cylinder Low Register [HEX]
 CH = Cylinder High Register [HEX]
 DH = Device/Head Register [HEX]
 DC = Device Command Register [HEX]
 ER = Error register [HEX]
 ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
 When the command that caused the error occurred, the device was in an unknown state.
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 f9 30 03 00 00 00 00 Device Fault
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
 -- -- -- -- -- -- -- -- ---------------- --------------------
 10 f9 03 00 08 00 00 b7 18d+15:23:34.696 RECALIBRATE [OBS-4]
 10 f9 03 00 08 00 00 b6 18d+15:23:34.696 RECALIBRATE [OBS-4]
 10 f9 03 00 08 00 00 b4 18d+15:23:34.696 RECALIBRATE [OBS-4]
 10 f9 03 00 08 00 00 b2 18d+15:23:34.696 RECALIBRATE [OBS-4]
 10 00 00 00 08 00 00 00 18d+15:23:34.696 RECALIBRATE [OBS-4]
Error -1 occurred at disk power-on lifetime: 768 hours (32 days + 0 hours)
 When the command that caused the error occurred, the device was in an unknown state.
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 00 07 00 00 00 0f a8
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
 -- -- -- -- -- -- -- -- ---------------- --------------------
 07 00 08 00 00 10 a8 03 48d+11:38:05.696 [RESERVED]
 07 00 08 00 00 10 a8 03 48d+11:35:54.624 [RESERVED]
 07 00 08 00 00 10 a8 03 48d+07:05:01.696 [RESERVED]
 07 00 08 00 00 10 a8 03 45d+07:05:06.816 [RESERVED]
 07 00 08 00 00 10 a8 00 45d+07:04:01.280 [RESERVED]
Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
 When the command that caused the error occurred, the device was in an unknown state.
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 10 e9 a8 07 00 60 40
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
 -- -- -- -- -- -- -- -- ---------------- --------------------
 e9 10 a8 07 00 60 3e 00 00:08:44.291 READ BUFFER DMA
 e9 10 a8 07 00 60 3c 00 00:08:44.291 READ BUFFER DMA
 e9 10 a8 07 00 60 3a 00 00:08:44.291 READ BUFFER DMA
 e9 10 a8 07 00 60 38 00 00:08:44.291 READ BUFFER DMA
 00 00 00 00 00 03 00 00 00:08:44.288 NOP [Abort queued commands]
Error -3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
 When the command that caused the error occurred, the device was in an unknown state.
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 07 00 00 60 36 e9 03
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
 -- -- -- -- -- -- -- -- ---------------- --------------------
 00 07 00 60 24 6a 03 a8 3d+02:33:55.464 NOP [Reserved subcommand] [OBS-ACS-2]
 00 07 00 60 7f 62 03 a8 3d+02:33:55.464 NOP [Reserved subcommand] [OBS-ACS-2]
 00 00 00 60 2b 1c 03 08 3d+02:33:55.464 NOP [Abort queued commands]
 00 00 00 60 29 1c 03 08 11d+06:17:58.528 NOP [Abort queued commands]
 00 00 00 03 00 00 00 00 11d+15:37:12.960 NOP [Abort queued commands]
Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
 When the command that caused the error occurred, the device was in an unknown state.
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 60 00 28 1c 03 00 00
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
 -- -- -- -- -- -- -- -- ---------------- --------------------
 00 60 26 1c 03 00 00 00 00:08:58.624 NOP [Reserved subcommand] [OBS-ACS-2]
 00 60 11 1a 03 00 00 00 00:09:00.160 NOP [Reserved subcommand] [OBS-ACS-2]
 00 60 0f 1a 03 00 08 00 00:08:58.624 NOP [Reserved subcommand] [OBS-ACS-2]
 00 60 bb f9 03 00 08 00 00:08:58.624 NOP [Reserved subcommand] [OBS-ACS-2]
 00 03 00 00 00 00 08 00 1d+11:40:54.656 NOP [Reserved subcommand] [OBS-ACS-2]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1037 -
Selective Self-tests/Logging not supported
root@NOTKALI:/mnt/boot#