Retourner au contenu associé (entrée de forum : Disque innacessible)
Posté par jil365 le 19 juin 2016 à 15:53. En réponse au message Disque innacessible. Évalué à 1.
root@NOTKALI:/home/user0# smartctl -a /dev/sdb smartctl 6.4 2015年06月04日 r4109 [x86_64-linux-4.3.0-kali1-amd64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: LITEON IT SMS-128L9M Serial Number: 002504133515 LU WWN Device Id: 5 002303 1003a7c53 Add. Product Id: RM702060 Firmware Version: RM70206 User Capacity: 128.035.676.160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jun 19 15:51:17 2016 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 10) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0003 100 100 000 Pre-fail Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 1037 12 Power_Cycle_Count 0x0003 100 100 000 Pre-fail Always - 367 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 24 171 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 1 172 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 0 173 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 68 174 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 31 175 Program_Fail_Count_Chip 0x0003 100 100 000 Pre-fail Always - 1 176 Erase_Fail_Count_Chip 0x0003 100 100 000 Pre-fail Always - 0 177 Wear_Leveling_Count 0x0003 100 100 000 Pre-fail Always - 70462 178 Used_Rsvd_Blk_Cnt_Chip 0x0003 100 100 000 Pre-fail Always - 2 179 Used_Rsvd_Blk_Cnt_Tot 0x0003 100 100 000 Pre-fail Always - 24 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 000 Pre-fail Always - 656 181 Program_Fail_Cnt_Total 0x0003 100 100 000 Pre-fail Always - 1 182 Erase_Fail_Count_Total 0x0003 100 100 000 Pre-fail Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 088 088 000 Pre-fail Always - 12 187 Reported_Uncorrect 0x0003 100 100 000 Pre-fail Always - 23 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0003 100 100 000 Pre-fail Always - 31 195 Hardware_ECC_Recovered 0x0003 100 100 000 Pre-fail Always - 0 196 Reallocated_Event_Count 0x0003 100 100 000 Pre-fail Always - 24 198 Offline_Uncorrectable 0x0003 100 100 000 Pre-fail Always - 3 199 UDMA_CRC_Error_Count 0x0003 100 100 000 Pre-fail Always - 0 232 Available_Reservd_Space 0x0003 097 097 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0003 100 100 000 Pre-fail Always - 3170 241 Total_LBAs_Written 0x0003 100 100 000 Pre-fail Always - 50725 242 Total_LBAs_Read 0x0003 100 100 000 Pre-fail Always - 43371 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1037 - Selective Self-tests/Logging not supported root@NOTKALI:/home/user0#
AltStyle によって変換されたページ (->オリジナル) / アドレス: モード: デフォルト 音声ブラウザ ルビ付き 配色反転 文字拡大 モバイル
# Précisions: Smartctl
Posté par jil365 . En réponse au message Disque innacessible. Évalué à 1.