Forum Linux.mandriva Hauppauge wintv ministick HD

Bonjour,

J'ai un problème pour utiliser ma carte TNT USB "Hauppauge wintv ministick HD":

dmesg donne :

usb 8-2: new high speed USB device using ehci_hcd and address 6
usb 8-2: New USB device found, idVendor=2040, idProduct=c000
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: WinTV MiniStick
usb 8-2: Manufacturer: Hauppauge Computer Works
usb 8-2: SerialNumber: 4034274907
smscore_set_device_mode: firmware download success: sms1xxx-hcw-55xxx-dvbt-02.fw
DVB: registering new adapter (Hauppauge WinTV MiniStick)
DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)...
sms_ir_init: Allocating rc device
sms_ir_init: IR port 0, timeout 100 ms
sms_ir_init: Input device (IR) SMS IR (Hauppauge WinTV MiniStick) is set for key events
Registered IR keymap rc-rc5-hauppauge-new
input: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:1d.7/usb8/8-2/rc/rc2/input14
rc2: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:1d.7/usb8/8-2/rc/rc2
rc rc2: lirc_dev: driver ir-lirc-codec (smsmdtv) registered at minor = 0

La carte est bien détecté par kaffeine ou autre mais lorsque je lance le scan:

[jonathan@localhost ~]$ kaffeine
kaffeine(9789) DvbManager::loadDeviceManager: using built-in dvb device manager
kaffeine(9789) DvbLinuxDevice::startDevice: found dvb device "" / "Siano Mobile Digital MDTV Receiver"
[jonathan@localhost ~]$ kaffeine(9789) DvbLinuxDevice::getSignal: ioctl FE_READ_SIGNAL_STRENGTH failed for frontend "/dev/dvb/adapter0/frontend0"
kaffeine(9789) DvbLinuxDevice::getSnr: ioctl FE_READ_SNR failed for frontend "/dev/dvb/adapter0/frontend0"
kaffeine(9789) DvbDevice::frontendEvent: tuning failed

Un "scan -c"

[jonathan@localhost ~]$ scan -c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
start_filter:1361: ERROR: ioctl DMX_SET_FILTER failed: 110 Connection timed out
start_filter:1361: ERROR: ioctl DMX_SET_FILTER failed: 110 Connection timed out
^CERROR: interrupted by SIGINT, dumping partial result...
dumping lists (0 services)
Done.

"lsusb -v -d 2040:c000" à du mal aussi sur la carte TV:

Bus 008 Device 005: ID 2040:c000 Hauppauge Windham
Device Descriptor:
 bLength 18
 bDescriptorType 1
 bcdUSB 2.00
 bDeviceClass 0 (Defined at Interface level)
 bDeviceSubClass 0
 bDeviceProtocol 0
 bMaxPacketSize0 64
 idVendor 0x2040 Hauppauge
 idProduct 0xc000 Windham
 bcdDevice 0.01
 iManufacturer 1
 iProduct 2
 iSerial 3
 bNumConfigurations 1
 Configuration Descriptor:
 bLength 9
 bDescriptorType 2
 wTotalLength 32
 bNumInterfaces 1
 bConfigurationValue 1
 iConfiguration 0
 bmAttributes 0x80
 (Bus Powered)
 MaxPower 100mA
 Interface Descriptor:
 bLength 9
 bDescriptorType 4
 bInterfaceNumber 0
 bAlternateSetting 0
 bNumEndpoints 2
 bInterfaceClass 255 Vendor Specific Class
 bInterfaceSubClass 255 Vendor Specific Subclass
 bInterfaceProtocol 255 Vendor Specific Protocol
 iInterface 0
 Endpoint Descriptor:
 bLength 7
 bDescriptorType 5
 bEndpointAddress 0x81 EP 1 IN
 bmAttributes 2
 Transfer Type Bulk
 Synch Type None
 Usage Type Data
 wMaxPacketSize 0x0200 1x 512 bytes
 bInterval 0
 Endpoint Descriptor:
 bLength 7
 bDescriptorType 5
 bEndpointAddress 0x02 EP 2 OUT
 bmAttributes 2
 Transfer Type Bulk
 Synch Type None
 Usage Type Data
 wMaxPacketSize 0x0200 1x 512 bytes
 bInterval 0
can't get device qualifier: Connection timed out
can't get debug descriptor: Connection timed out
cannot read device status, Connection timed out (110)

D'où celà peut t'il venir?

Merci pour votre aide