URL: https://linuxfr.org/forums/linux-mandriva/posts/hauppauge-wintv-ministick-hd Title: Hauppauge wintv ministick HD Authors: scottynou Date: 2011年09月22日T13:07:20+02:00 Tags: Score: 0 Bonjour, J'ai un problème pour utiliser ma carte TNT USB "Hauppauge wintv ministick HD": dmesg donne :> usb 8-2: new high speed USB device using ehci_hcd and address 6 usb 8-2: New USB device found, idVendor=2040, idProduct=c000 usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 8-2: Product: WinTV MiniStick usb 8-2: Manufacturer: Hauppauge Computer Works usb 8-2: SerialNumber: 4034274907 smscore_set_device_mode: firmware download success: sms1xxx-hcw-55xxx-dvbt-02.fw DVB: registering new adapter (Hauppauge WinTV MiniStick) DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)... sms_ir_init: Allocating rc device sms_ir_init: IR port 0, timeout 100 ms sms_ir_init: Input device (IR) SMS IR (Hauppauge WinTV MiniStick) is set for key events Registered IR keymap rc-rc5-hauppauge-new input: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:1d.7/usb8/8-2/rc/rc2/input14 rc2: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:1d.7/usb8/8-2/rc/rc2 rc rc2: lirc_dev: driver ir-lirc-codec (smsmdtv) registered at minor = 0 La carte est bien détecté par kaffeine ou autre mais lorsque je lance le scan:> [jonathan@localhost ~]$ kaffeine kaffeine(9789) DvbManager::loadDeviceManager: using built-in dvb device manager kaffeine(9789) DvbLinuxDevice::startDevice: found dvb device "" / "Siano Mobile Digital MDTV Receiver" [jonathan@localhost ~]$ kaffeine(9789) DvbLinuxDevice::getSignal: ioctl FE_READ_SIGNAL_STRENGTH failed for frontend "/dev/dvb/adapter0/frontend0" kaffeine(9789) DvbLinuxDevice::getSnr: ioctl FE_READ_SNR failed for frontend "/dev/dvb/adapter0/frontend0" kaffeine(9789) DvbDevice::frontendEvent: tuning failed Un "scan -c"> [jonathan@localhost ~]$ scan -c using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' start_filter:1361: ERROR: ioctl DMX_SET_FILTER failed: 110 Connection timed out start_filter:1361: ERROR: ioctl DMX_SET_FILTER failed: 110 Connection timed out ^CERROR: interrupted by SIGINT, dumping partial result... dumping lists (0 services) Done. "lsusb -v -d 2040:c000" à du mal aussi sur la carte TV:> Bus 008 Device 005: ID 2040:c000 Hauppauge Windham Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2040 Hauppauge idProduct 0xc000 Windham bcdDevice 0.01 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 can't get device qualifier: Connection timed out can't get debug descriptor: Connection timed out cannot read device status, Connection timed out (110) D'où celà peut t'il venir? Merci pour votre aide