An FPGA-based USB 1.1 (full-speed) device core to implement USB-serial, USB-camera, USB-audio, USB-hid, etc. It requires only 3 FPGA common IOs rather than additional chips. 基于FPGA的USB 1.1 (full-speed) device端控制器,可实现USB串口、USB摄像头、USB音频、U盘、USB键盘等设备,只需要3个FPGA普通IO,而不需要额外的接口芯片。
Hacking tool inside a Raspberry Pi zero
AlienFX is a CLI and GUI utility to control the lighting effects of your Alienware computer.
Firmware dumper and various utilities for ASMedia USB Controllers and related firmware
Raspberry Pi impersonates Nintendo Switch controller
Nintendo Switch Gamepad Arduino Library For ESP32S3 and ESP32S2
Automatically launch/close Steam big picture mode when a controller is connected or disconnected on linux.
USB Gamepad for ESP32
👀 Setup an Oculus Rift on a Windows 10 VM made with KVM
Nintendo Switch Gamepad Arduino Library Using TinyUSB
Arduino USB flight joystick for ESP32S3 and ESP32S2
Nintendo Switch One Hand Controller
A Python module for controlling PTZ cameras running on Sony VISCA protocol via serial USB
Light's Thrill is an USB HID controller for RGB LED strips compatible with Corsair iCUE application.
USB Flight Joystick Arduino Library Using Adafruit TinyUSB XAC compatible
Deep-dive hardware analysis and post-mortem of a bricked Alcor Micro USB drive. Bypassing factory write-protection via DFU hardware shorting and low-level mass production tools (AlcorMP).
Hardware controller for moOde Audio using USB numpad
OpenDeck-RP2040-v0 is a DIY 9-key macro pad prototype inspired by the Elgato Stream Deck, built around the Seeed XIAO RP2040.
Official public technical overview, endpoint, network and cloud DLP architecture and integration resources for Siberson Verikor DLP.
Windows PureBasic controller for the Tenx USB Missile Launcher with GUI, command-line mode, and libusb-win32 setup helpers.
To associate your repository with the usb-controller topic, visit your repo's landing page and select "manage topics."