Circuit underutilization

Circuit underutilization also chip underutilization, programmable circuit underutilization, gate underutilization, logic block underutilization refers to a physical incomplete utility of semiconductor grade silicon on a standardized mass-produced circuit programmable chip, such as a gate array type ASIC, an FPGA, or a CPLD.

In the example of a gate array, which may come in sizes of 5,000 or 10,000 gates, a design which utilizes even 5,001 gates would be required to use a 10,000 gate chip. This inefficiency results in underutilization of the silicon.^[1]

Due to the design components of field-programmable gate array into logic blocks, simple designs that underutilize a single block suffer from gate underutilization, as do designs that overflow onto multiple blocks, such as designs that use wide gates.^[2] Additionally, the very generic architecture of FPGAs lends to high inefficiency; multiplexers occupy silicon real estate for programmable selection, and an abundance of flip-flops to reduce setup and hold times, even if the design does not require them,^[1] resulting in 40 times less density than of standard cell ASICs.

• Circuit minimization
• Don't-care condition

• Gate arrays
• Electronics stubs

• CS1 errors: periodical ignored
• Articles with short description
• Short description matches Wikidata
• Use dmy dates from May 2019
• Use American English from March 2019
• All Wikipedia articles written in American English
• All stub articles