Re: c quoi ta webcam ?

Merci pour ton aide. J'ai pris le premier des deux et voilà ce que me donne un dmesg : (bref, la webcammarche pa sous amsn )


d 3246.647 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514888k/524096k available (2068k kernel code, 8556k reserved, 647k data, 144k init, 0k highmem)
Calibrating delay loop... 6324.22 BogoMIPS (lpj=3162112)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 387k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC0] (gpe 25)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt .&checktime(0000,00,02,':').1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI interrupt .&checktime(0000,00,02,':').6[C] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt .&checktime(0000,00,02,':').7[C] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
ACPI: PCI interrupt .&checktime(0000,00,03,':').0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 4
ACPI: PCI interrupt .&checktime(0000,00,03,':').1[B] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
ACPI: PCI interrupt .&checktime(0000,00,03,':').3[D] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt .&checktime(0000,00,04,':').0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt .&checktime(0000,00,09,':').0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt .&checktime(0000,00,09,':').1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt .&checktime(0000,00,09,':').2[C] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt .&checktime(0000,01,00,':').0[A] -> GSI 11 (level, low) -> IRQ 11
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1139245994.114:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 6ECDA687281A73E5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Fan [FN00] (off)
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Thermal Zone [THRM] (54 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 648 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI interrupt .&checktime(0000,00,02,':').6[C] -> GSI 10 (level, low) -> IRQ 10
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot .&checktime(0000,00,02,':').5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: FUJITSU MHU2100AT, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hdc: max request size: 128KiB
hdc: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 hdc8 hdc9 >
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
180 degree mounted touchpad
Sensor: 35
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Invalid control/status registers
speedstep-centrino: found unsupported CPU with Enhanced SpeedStep: send /proc/cp uinfo to Jeremy Fitzhardinge <jeremy@goop.org>
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
AC97 MC97 MAC CBS0 P394 FMEM EUSB USB USB2 USB3
Freeing unused kernel memory: 144k freed
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hdc6: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 161254
ext3_orphan_cleanup: deleting unreferenced inode 161186
EXT3-fs: hdc6: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 280 types, 16 bools
security: 53 classes, 5494 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hdc6, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labelin g
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.9-1.667
floppy0: no floppy controllers found
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt .&checktime(0000,00,04,':').0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for eth0
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 11, 00:11:d8:8c:34:6c.
ip_tables: (C) 2000-2002 Netfilter core team
ACPI: PCI interrupt .&checktime(0000,00,02,':').7[C] -> GSI 10 (level, low) -> IRQ 10
intel8x0_measure_ac97_clock: measured 49677 usecs
intel8x0: clocking to 48000
usbcore: registered new driver snd-usb-audio
ACPI: PCI interrupt .&checktime(0000,00,03,':').3[D] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd .&checktime(0000,00,03,':').3: EHCI Host Controller
ehci_hcd .&checktime(0000,00,03,':').3: irq 5, pci mem 22836000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd .&checktime(0000,00,03,':').3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device .&checktime(0000,00,03,':').3
ehci_hcd .&checktime(0000,00,03,':').3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt .&checktime(0000,00,03,':').0[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd .&checktime(0000,00,03,':').0: OHCI Host Controller
ohci_hcd .&checktime(0000,00,03,':').0: irq 5, pci mem 2283c000
ohci_hcd .&checktime(0000,00,03,':').0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt .&checktime(0000,00,03,':').1[B] -> GSI 4 (level, low) -> IRQ 4
ohci_hcd .&checktime(0000,00,03,':').1: OHCI Host Controller
eth0: Media Link On 100mbps full-duplex
ohci_hcd .&checktime(0000,00,03,':').1: irq 4, pci mem 228ae000
ohci_hcd .&checktime(0000,00,03,':').1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Enabling device .&checktime(0000,00,09,':').0 (0000 -> 0002)
ACPI: PCI interrupt .&checktime(0000,00,09,':').0[A] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at .&checktime(0000,00,09,':').0 [1043:1927]
Yenta: ISA IRQ mask 0x0088, PCI irq 10
Socket status: 30000006
ohci_hcd .&checktime(0000,00,03,':').0: wakeup
ACPI: PCI interrupt .&checktime(0000,00,09,':').1[B] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at .&checktime(0000,00,09,':').1 [1043:1927]
Yenta: ISA IRQ mask 0x0008, PCI irq 11
Socket status: 30000006
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt .&checktime(0000,00,09,':').2[C] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[dfffb800-dfffbfff] Max Packet=[2048]
ohci_hcd .&checktime(0000,00,03,':').1: wakeup
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ip_tables: (C) 2000-2002 Netfilter core team
usb 1-6: new high speed USB device using address 5
usb 2-1: new low speed USB device using address 2
ACPI: AC Adapter [AC0] (on-line)
Asus Laptop ACPI Extras version 0.29
A4G model detected, unsupported, trying default values, supply the developers with your DSDT
input: USB HID v1.10 Mouse [1241:1166] on usb-.&checktime(0000,00,03,':').0-1
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800032b3790]
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
usb 2-2: new full speed USB device using address 3
usb 3-1: new full speed USB device using address 2
Linux video capture interface: v1.00
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 pr oto 2 vid 0x03F0 pid 0x7004
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
/home/patrice/spca5xx-20041107/drivers/usb/spca50x.c: USB SPCA5XX camera found. Type Labtec Webcam Pro Zc0302 + Hdcs2020
/home/patrice/spca5xx-20041107/drivers/usb/spca50x.c: [spca50x_probe:7551] Camer a type JPEG
usbcore: registered new driver spca50x
/home/patrice/spca5xx-20041107/drivers/usb/spca50x.c: spca5xx driver 0.52 regist ered
EXT3 FS on hdc6, internal journal
device-mapper: 4.1.0-ioctl (2003年12月10日) initialised: dm@uk.sistina.com
cdrom: open failed.
usb 2-2: control timeout on ep0in
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdc5, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdc9, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdc8, type ext3), uses xattr
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02369a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Adding 1044184k swap on /dev/hdc7. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
eth0: no IPv6 routers present
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4094 buckets, 32752 max) - 356 bytes per conntrack
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: excluding 0xa00-0xa0f
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
/home/patrice/spca5xx-20041107/drivers/usb/spca50x.c: init isoc: usb_submit_urb( 0) ret -28
SELinux: initialized (dev hdc2, type vfat), uses genfs_contexts
application sox uses obsolete OSS audio interface