Voilà ce que ça donne : Je ne comprends rien de ce que ça veut dire.
SK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hdc: max request size: 128KiB
hdc: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 hdc8 hdc9 >
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
180 degree mounted touchpad
Sensor: 35
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Invalid control/status registers
speedstep-centrino: found unsupported CPU with Enhanced SpeedStep: send /proc/cp uinfo to Jeremy Fitzhardinge <jeremy@goop.org>
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
AC97 MC97 MAC CBS0 P394 FMEM EUSB USB USB2 USB3
Freeing unused kernel memory: 144k freed
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 280 types, 16 bools
security: 53 classes, 5494 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hdc6, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labelin g
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.9-1.667
floppy0: no floppy controllers found
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt .&checktime(0000,00,04,':').0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for eth0
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 11, 00:11:d8:8c:34:6c.
ACPI: PCI interrupt .&checktime(0000,00,02,':').7[C] -> GSI 10 (level, low) -> IRQ 10
intel8x0_measure_ac97_clock: measured 49410 usecs
intel8x0: clocking to 48000
usbcore: registered new driver snd-usb-audio
ACPI: PCI interrupt .&checktime(0000,00,03,':').3[D] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd .&checktime(0000,00,03,':').3: EHCI Host Controller
ehci_hcd .&checktime(0000,00,03,':').3: irq 5, pci mem 22836000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd .&checktime(0000,00,03,':').3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device .&checktime(0000,00,03,':').3
ehci_hcd .&checktime(0000,00,03,':').3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt .&checktime(0000,00,03,':').0[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd .&checktime(0000,00,03,':').0: OHCI Host Controller
ohci_hcd .&checktime(0000,00,03,':').0: irq 5, pci mem 2283c000
ohci_hcd .&checktime(0000,00,03,':').0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt .&checktime(0000,00,03,':').1[B] -> GSI 4 (level, low) -> IRQ 4
ohci_hcd .&checktime(0000,00,03,':').1: OHCI Host Controller
ohci_hcd .&checktime(0000,00,03,':').1: irq 4, pci mem 228ae000
ohci_hcd .&checktime(0000,00,03,':').1: new USB bus registered, assigned bus number 3
ohci_hcd .&checktime(0000,00,03,':').0: wakeup
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Enabling device .&checktime(0000,00,09,':').0 (0000 -> 0002)
ACPI: PCI interrupt .&checktime(0000,00,09,':').0[A] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at .&checktime(0000,00,09,':').0 [1043:1927]
Yenta: ISA IRQ mask 0x0088, PCI irq 10
Socket status: 30000006
ACPI: PCI interrupt .&checktime(0000,00,09,':').1[B] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at .&checktime(0000,00,09,':').1 [1043:1927]
Yenta: ISA IRQ mask 0x0088, PCI irq 11
Socket status: 30000006
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt .&checktime(0000,00,09,':').2[C] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[dfffb800-dfffbfff] Max Packet=[2048]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 1-6: new high speed USB device using address 4
usb 2-1: new low speed USB device using address 2
ACPI: AC Adapter [AC0] (on-line)
Asus Laptop ACPI Extras version 0.29
A4G model detected, unsupported, trying default values, supply the developers with your DSDT
input: USB HID v1.10 Mouse [1241:1166] on usb-.&checktime(0000,00,03,':').0-1
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800032b3790]
usb 2-2: new full speed USB device using address 3
EXT3 FS on hdc6, internal journal
device-mapper: 4.1.0-ioctl (2003年12月10日) initialised: dm@uk.sistina.com
cdrom: open failed.
Linux video capture interface: v1.00
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: USB SPCA5XX camera found. Type Labtec Webcam Pro Zc0302 + Hdcs2020
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_probe:8188] Camer a type JPEG
/home/patrice/spca5xx-20060202/drivers/usb/zc3xx.h: [zc3xx_config:505] Find Sens or PAS202BCB
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_getcapability:217 6] maxw 640 maxh 480 minw 176 minh 144
usbcore: registered new driver spca5xx
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: spca5xx driver 00.57.09 re gistered
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdc5, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdc9, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdc8, type ext3), uses xattr
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
usb 2-2: control timeout on ep0in
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02369a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Adding 1044184k swap on /dev/hdc7. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4094 buckets, 32752 max) - 356 bytes per conntrack
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: excluding 0xa00-0xa0f
eth0: Media Link On 100mbps full-duplex
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
eth0: no IPv6 routers present
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
SELinux: initialized (dev hdc2, type vfat), uses genfs_contexts
application mozilla-bin uses obsolete OSS audio interface
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd0c0 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd100 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd140 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd180 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd1c0 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd200 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd240 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd280 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd2c0 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd300 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd340 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd380 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
usb 1-2: new high speed USB device using address 5
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: SAMSUNG Model: SP1604N Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
USB Mass Storage device found at 5
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: assuming drive cache: write through
sda: sda1 sda2 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda6, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda7, type ext3), uses xattr
usb 1-2: USB disconnect, address 5
scsi0 (0:0): rejecting I/O to dead device
Buffer I/O error on device sda6, logical block 0
lost page write due to I/O error on sda6
scsi0 (0:0): rejecting I/O to dead device
Buffer I/O error on device sda1, logical block 0
lost page write due to I/O error on sda1
usb 1-2: new high speed USB device using address 6
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: SAMSUNG Model: SP1604N Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: assuming drive cache: write through
sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
USB Mass Storage device found at 6
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb1, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb6, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb6, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb7, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb7, type ext3), uses xattr
usb 1-2: USB disconnect, address 6
scsi1 (0:0): rejecting I/O to dead device
Buffer I/O error on device sdb6, logical block 0
lost page write due to I/O error on sdb6
scsi1 (0:0): rejecting I/O to dead device
Buffer I/O error on device sdb1, logical block 0
lost page write due to I/O error on sdb1
ohci_hcd .&checktime(0000,00,03,':').1: wakeup
usb 3-1: new full speed USB device using address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 pr oto 2 vid 0x03F0 pid 0x7004
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 3-1: USB disconnect, address 2
drivers/usb/class/usblp.c: usblp0: removed
ohci_hcd .&checktime(0000,00,03,':').1: wakeup
usb 3-1: new full speed USB device using address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 pr oto 2 vid 0x03F0 pid 0x7004
[^] # Re: c quoi ta webcam ?
Posté par Darius93 . En réponse au message Webcam labtec. Évalué à 1.
SK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hdc: max request size: 128KiB
hdc: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 hdc8 hdc9 >
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
180 degree mounted touchpad
Sensor: 35
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Invalid control/status registers
speedstep-centrino: found unsupported CPU with Enhanced SpeedStep: send /proc/cp uinfo to Jeremy Fitzhardinge <jeremy@goop.org>
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
AC97 MC97 MAC CBS0 P394 FMEM EUSB USB USB2 USB3
Freeing unused kernel memory: 144k freed
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 280 types, 16 bools
security: 53 classes, 5494 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hdc6, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labelin g
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.9-1.667
floppy0: no floppy controllers found
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt .&checktime(0000,00,04,':').0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for eth0
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 11, 00:11:d8:8c:34:6c.
ACPI: PCI interrupt .&checktime(0000,00,02,':').7[C] -> GSI 10 (level, low) -> IRQ 10
intel8x0_measure_ac97_clock: measured 49410 usecs
intel8x0: clocking to 48000
usbcore: registered new driver snd-usb-audio
ACPI: PCI interrupt .&checktime(0000,00,03,':').3[D] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd .&checktime(0000,00,03,':').3: EHCI Host Controller
ehci_hcd .&checktime(0000,00,03,':').3: irq 5, pci mem 22836000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd .&checktime(0000,00,03,':').3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device .&checktime(0000,00,03,':').3
ehci_hcd .&checktime(0000,00,03,':').3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt .&checktime(0000,00,03,':').0[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd .&checktime(0000,00,03,':').0: OHCI Host Controller
ohci_hcd .&checktime(0000,00,03,':').0: irq 5, pci mem 2283c000
ohci_hcd .&checktime(0000,00,03,':').0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt .&checktime(0000,00,03,':').1[B] -> GSI 4 (level, low) -> IRQ 4
ohci_hcd .&checktime(0000,00,03,':').1: OHCI Host Controller
ohci_hcd .&checktime(0000,00,03,':').1: irq 4, pci mem 228ae000
ohci_hcd .&checktime(0000,00,03,':').1: new USB bus registered, assigned bus number 3
ohci_hcd .&checktime(0000,00,03,':').0: wakeup
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Enabling device .&checktime(0000,00,09,':').0 (0000 -> 0002)
ACPI: PCI interrupt .&checktime(0000,00,09,':').0[A] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at .&checktime(0000,00,09,':').0 [1043:1927]
Yenta: ISA IRQ mask 0x0088, PCI irq 10
Socket status: 30000006
ACPI: PCI interrupt .&checktime(0000,00,09,':').1[B] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at .&checktime(0000,00,09,':').1 [1043:1927]
Yenta: ISA IRQ mask 0x0088, PCI irq 11
Socket status: 30000006
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt .&checktime(0000,00,09,':').2[C] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[dfffb800-dfffbfff] Max Packet=[2048]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 1-6: new high speed USB device using address 4
usb 2-1: new low speed USB device using address 2
ACPI: AC Adapter [AC0] (on-line)
Asus Laptop ACPI Extras version 0.29
A4G model detected, unsupported, trying default values, supply the developers with your DSDT
input: USB HID v1.10 Mouse [1241:1166] on usb-.&checktime(0000,00,03,':').0-1
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800032b3790]
usb 2-2: new full speed USB device using address 3
EXT3 FS on hdc6, internal journal
device-mapper: 4.1.0-ioctl (2003年12月10日) initialised: dm@uk.sistina.com
cdrom: open failed.
Linux video capture interface: v1.00
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: USB SPCA5XX camera found. Type Labtec Webcam Pro Zc0302 + Hdcs2020
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_probe:8188] Camer a type JPEG
/home/patrice/spca5xx-20060202/drivers/usb/zc3xx.h: [zc3xx_config:505] Find Sens or PAS202BCB
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_getcapability:217 6] maxw 640 maxh 480 minw 176 minh 144
usbcore: registered new driver spca5xx
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: spca5xx driver 00.57.09 re gistered
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdc5, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdc9, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdc8, type ext3), uses xattr
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
usb 2-2: control timeout on ep0in
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02369a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Adding 1044184k swap on /dev/hdc7. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4094 buckets, 32752 max) - 356 bytes per conntrack
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: excluding 0xa00-0xa0f
eth0: Media Link On 100mbps full-duplex
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
eth0: no IPv6 routers present
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
SELinux: initialized (dev hdc2, type vfat), uses genfs_contexts
application mozilla-bin uses obsolete OSS audio interface
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd0c0 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd100 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd140 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd180 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd1c0 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd200 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd240 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd280 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd2c0 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd300 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd340 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
ohci_hcd .&checktime(0000,00,03,':').0: leak ed 20dbd380 (#2) state 2
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: init isoc: usb_submit_urb( 0) ret -28
/home/patrice/spca5xx-20060202/drivers/usb/spca5xx.c: [spca5xx_open:3865] DEALL OC error on init_Isoc
usb 1-2: new high speed USB device using address 5
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: SAMSUNG Model: SP1604N Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
USB Mass Storage device found at 5
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: assuming drive cache: write through
sda: sda1 sda2 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda6, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda7, type ext3), uses xattr
usb 1-2: USB disconnect, address 5
scsi0 (0:0): rejecting I/O to dead device
Buffer I/O error on device sda6, logical block 0
lost page write due to I/O error on sda6
scsi0 (0:0): rejecting I/O to dead device
Buffer I/O error on device sda1, logical block 0
lost page write due to I/O error on sda1
usb 1-2: new high speed USB device using address 6
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: SAMSUNG Model: SP1604N Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: assuming drive cache: write through
sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
USB Mass Storage device found at 6
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb1, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb6, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb6, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb7, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb7, type ext3), uses xattr
usb 1-2: USB disconnect, address 6
scsi1 (0:0): rejecting I/O to dead device
Buffer I/O error on device sdb6, logical block 0
lost page write due to I/O error on sdb6
scsi1 (0:0): rejecting I/O to dead device
Buffer I/O error on device sdb1, logical block 0
lost page write due to I/O error on sdb1
ohci_hcd .&checktime(0000,00,03,':').1: wakeup
usb 3-1: new full speed USB device using address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 pr oto 2 vid 0x03F0 pid 0x7004
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 3-1: USB disconnect, address 2
drivers/usb/class/usblp.c: usblp0: removed
ohci_hcd .&checktime(0000,00,03,':').1: wakeup
usb 3-1: new full speed USB device using address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 pr oto 2 vid 0x03F0 pid 0x7004