• [^] # Re: adsl max ?

    Posté par . En réponse au message sagem avec cegetel. Évalué à 1.

    Pour l'usb ca fonctionne. Voila ce que j'obitens par lsusb:

    Bus 004 Device 001: ID 0000:0000
    Bus 003 Device 003: ID 1110:9021 Analog Devices Canada, Ltd (Allied Telesyn)
    Bus 003 Device 001: ID 0000:0000
    Bus 002 Device 003: ID 046d:08b4 Logitech, Inc. QuickCam Zoom
    Bus 002 Device 001: ID 0000:0000
    Bus 001 Device 001: ID 0000:0000


    Des que je branche mon modem, il est detecte et eagle-sub est installe. Par contre le driver installe c'est celui de la distrib le 2.3.0.
    J'ai desinstalle le driver 2.3.0mais pas moyen de re installer le driver 2.3.1.

    Dans l'ordre, un ./configure, make uninstall( je debranche mon modem), make et puis enfin make install. Je rebranche le modem et je fait un eagleconfig mais il ne detecte pas le modem.

    Avec la 2.3.0, l'adsl parait fonctionner mais pas moyen de se connecter au net.
    eagle-usb status display
    -------------------------------------------------------------
    Driver version 2.3.0 Chipset: Eagle0
    Vendor ID : 0x1110 Product ID : 0x9021 Rev: 0x500b
    USB Bus : 003 USB Device : 003 Dbg mask: 0x0
    Ethernet Interface : eth0
    MAC: 00:60:4c:63:80:3c
    Tx Rate 608 Rx Rate 7296
    FEC 621 Margin 15 Atten 22 dB
    VID-CPE 0 VID-CO 28 HEC 14
    VPI 8 VCI 35 Delin GOOD
    Cells Tx 46 Cells Rx 514
    Pkts Tx 37 Pkts Rx 230
    OAM 0 Bad VPI 0 Bad CRC 0
    Oversiz. 0

    Modem is operational


    voila ce que j'obitens avec un eaglestat:
    le paquetage kernel-source n'est pas installé
    kernel-source-2.6-2.6.11-6mdk
    ppp-2.4.3-4mdk
    dhcp-client-3.0.2-1mdk
    le paquetage dhcpcd n'est pas installé
    lrwxrwxrwx 1 root root 17 mai 15 00:24 linux -> linux-2.6.11-6mdk
    drwxr-xr-x 21 root root 4096 mai 15 00:24 linux-2.6.11-6mdk
    Warning : available gcc and the version used to compile the kernel differ
    Advice : that's a standard problem on debian, revert to gcc version used for kernel
    # Kernel config : usb modules
    snd-usb-audio 65472 1
    snd-usb-lib 13696 1 snd-usb-audio
    snd-rawmidi 19648 1 snd-usb-lib
    snd-pcm 80776 4 snd-usb-audio,snd-pcm-oss,snd-intel8x0,snd-ac97-codec
    snd 46980 15 snd-usb-audio,snd-rawmidi,snd-seq-oss,snd-seq,snd-seq-device,snd-pcm-oss,snd-mixer-oss,snd-intel8x0,snd-ac97-codec,snd-pcm,snd-timer
    ppp_async 9088 0
    ppp_generic 24692 1 ppp_async
    slhc 6176 1 ppp_generic
    crc-ccitt 1664 1 ppp_async
    ohci1394 31076 0
    ieee1394 292152 2 eth1394,ohci1394
    syncppp 14272 1 hdlc
    eagle-usb 123264 0
    ehci-hcd 28648 0
    ohci-hcd 19112 0
    usbcore 106008 7 snd-usb-audio,snd-usb-lib,pwc,eagle-usb,ehci-hcd,ohci-hcd
    # module loaded ? [ OK ]
    # modem operational ? [ OK ]
    eagle-usb status display
    -------------------------------------------------------------
    Driver version 2.3.0 Chipset: Eagle0
    Vendor ID : 0x1110 Product ID : 0x9021 Rev: 0x500b
    USB Bus : 003 USB Device : 003 Dbg mask: 0x0
    Ethernet Interface : eth0
    MAC: 00:60:4c:63:80:3c
    Tx Rate 608 Rx Rate 7296
    FEC 690 Margin 15 Atten 22 dB
    VID-CPE 0 VID-CO 28 HEC 14
    VPI 8 VCI 35 Delin GOOD
    Cells Tx 46 Cells Rx 514
    Pkts Tx 37 Pkts Rx 230
    OAM 0 Bad VPI 0 Bad CRC 0
    Oversiz. 0

    Modem is operational

    # Config vpi/vci/encapsulation/isp : 8 23 6 (pppoa) FR10
    # pppd launched ? [ KO ]
    # /etc/resolv.conf should contain the DNS
    nameserver 217.19.192.131 # ppp temp entry
    nameserver 217.19.192.132 # ppp temp entry
    nameserver 217.19.192.131 # ppp temp entry
    nameserver 217.19.192.132 # ppp temp entry
    eth0 Lien encap:Ethernet HWaddr 00:60:4C:63:80:3C
    BROADCAST MULTICAST MTU:65535 Metric:1
    RX packets:230 errors:0 dropped:0 overruns:0 frame:0
    TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 lg file transmission:1000
    RX bytes:14750 (14.4 Kb) TX bytes:1655 (1.6 Kb)

    eth1 Lien encap:UNSPEC HWaddr 00-00-10-DC-00-1D-F8-CE-00-00-00-00-00-00-00-00
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 lg file transmission:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    lo Lien encap:Boucle locale
    inet adr:127.0.0.1 Masque:255.0.0.0
    adr inet6: ::1/128 Scope:Hôte
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:229 errors:0 dropped:0 overruns:0 frame:0
    TX packets:229 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 lg file transmission:0
    RX bytes:18992 (18.5 Kb) TX bytes:18992 (18.5 Kb)

    sit0 Lien encap:IPv6-dans-IPv4
    adr inet6: ::127.0.0.1/96 Scope:Inconnu
    UP RUNNING NOARP MTU:1480 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 lg file transmission:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    Table de routage IP du noyau
    Destination Passerelle Genmask Indic Metric Ref Use Iface
    # ping IP ? [ KO ]
    # test DNS resolution ? [ KO ]
    ##Complete diagnostic has been saved on /var/log/eagle-usb/eagle_diag_20050516205644.txt
    ##Please keep only relevant data and remove personal informations.

    La je sais plus trop quoi faire.

    Pour le lilo.conf, j'ai essaye ta solution mais y a pas d'amelioration.