• [^] # Re: Problème de graveur DVD

    Posté par . En réponse au message Cd rom et point de montage. Évalué à 1.

    > En revanche tu devrai avoir /dev/cdrom qui d
    La est bien mon malheur, c'est qu'il n'y a rien de ce style :(

    Pour dmesg, je suis en train de l'étudier, et je ne vois rien qui ressemble ni a cdrom, ni rien qui concerne les hd(a,b,c,...).

    Le graveur (pioneer) est en ide. Dans le bios, il est reconnu comme CDRom-Reader.

    Extrait du dmesg :

    ACPI: PCI interrupt .&checktime(0000,01,02,':').0[A] -> GSI 17 (level, low) -> IRQ 185
    megaraid: found 0x101e:0x1960:bus 1:slot 2:func 0
    scsi0:Found MegaRAID controller at 0xe081f000, IRQ:185
    megaraid: [6.62:1.03] detected 1 logical drives.
    megaraid: supports extended CDBs.
    megaraid: channel[0] is raid.
    megaraid: channel[1] is raid.
    megaraid: channel[2] is raid.
    megaraid: channel[3] is raid.
    scsi0 : LSI Logic MegaRAID 6.62 254 commands 16 targs 7 chans 7 luns
    Using anticipatory io scheduler
    scsi0: scanning scsi channel 0 [P0] for physical devices.
    scsi0: scanning scsi channel 1 [P1] for physical devices.
    scsi0: scanning scsi channel 2 [P2] for physical devices.
    scsi0: scanning scsi channel 3 [P3] for physical devices.
    scsi0: scanning scsi channel 4 for logical drives.
    Vendor: MegaRAID Model: LD 0 RAID1 114G Rev: 6.62
    Type: Direct-Access ANSI SCSI revision: 02
    scsi0: scanning scsi channel 5 for logical drives.
    scsi0: scanning scsi channel 6 for logical drives.
    Fusion MPT base driver 3.01.09
    Copyright (c) 1999-2004 LSI Logic Corporation
    ACPI: PCI interrupt .&checktime(0000,01,04,':').0[A] -> GSI 29 (level, low) -> IRQ 193
    mptbase: Initiating ioc0 bringup
    ioc0: 53C1030: Capabilities={Initiator}
    Fusion MPT SCSI Host driver 3.01.09
    scsi1 : ioc0: LSI53C1030, FwRev=01030400h, Ports=1, MaxQ=255, IRQ=193
    SCSI device sda: 234348544 512-byte hdwr sectors (119986 MB)
    sda: asking for cache data failed
    sda: assuming drive cache: write through
    /dev/scsi/host0/bus4/target0/lun0: p1 p2 p3 p4 < p5 >
    Attached scsi disk sda at scsi0, channel 4, id 0, lun 0
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1
    EXT3 FS on sda2, internal journal
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Attached scsi generic sg0 at scsi0, channel 4, id 0, lun 0, type 0
    Capability LSM initialized
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    e1000: Ignoring new-style parameters in presence of obsolete ones
    Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
    Copyright (c) 1999-2004 Intel Corporation.
    ACPI: PCI interrupt .&checktime(0000,00,02,':').0[A] -> GSI 16 (level, low) -> IRQ 177
    e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ohci_hcd: block sizes: ed 64 td 64
    ACPI: PCI interrupt .&checktime(0000,00,0,':')f.2[A] -> GSI 10 (level, low) -> IRQ 10
    ohci_hcd .&checktime(0000,00,0,':')f.2: ServerWorks OSB4/CSB5 OHCI USB Controller
    ohci_hcd .&checktime(0000,00,0,':')f.2: irq 10, pci mem e0829000
    ohci_hcd .&checktime(0000,00,0,':')f.2: new USB bus registered, assigned bus number 1
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    Linux agpgart interface v0.100 (c) Dave Jones
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    inserting floppy driver for 2.6.8-2-686
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a National Semiconductor PC87306
    input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
    mice: PS/2 mouse device common for all mice
    ts: Compaq touchscreen protocol output
    input: PC Speaker
    Real Time Clock Driver v1.12
    e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device c02ff020(lo)
    IPv6 over IPv4 tunneling driver
    mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining
    mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining
    eth0: no IPv6 routers present