Re: cdrecord

Salut Eric!
donc je fais comme tu dis :

zibm42:/dev/scsi/host0/bus0/target0/lun0# ls -al
total 8
drwxr-xr-x 2 root root 4096 2004年12月13日 17:51 .
drwxr-xr-x 3 root root 4096 2004年12月13日 17:51 ..
lrwxr-xr-x 1 root root 9 2004年12月13日 17:51 p1 -> /dev/sda1

la je branche le graveur dvd en usb2
et puis je fais le sempiternel :

# mount -t iso9660 /dev/sda1 /mnt/dvdrom/
mount: /dev/sda1 is not a valid block device

ou bien sg0 ou sda ....


ok, je reessaye avec le growisofs et çà fait toujours pareil.en faisant demesg j ai :


usb 1-4: new high speed USB device using address 4
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x05e3, Product: 0x0701, Revision: 0x0002
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
usb-storage: Vendor: Genesys Logic, Product: USB TO IDE
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is 1, data is 0
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand called
usb-storage: *** thread sleeping.
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x11 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31sb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: _NEC Model: DVD_RW ND-1300A Rev: 1.0B
Type: CD-ROM ANSI SCSI revision: 02
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called


etc .. etc ...
il dit associer scsi2 (car c 'est la 3eme fois que j'essaie)
j ai pas l impression, et k3b non plus..
voilà, j ai beau checrher, je trouve pas....
merci pour vos remarques eventuelles!!