Re: Noyau 2.6 et vidéos...

dmesg
BIOS installation structure at 0xc00fbd50
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbd80, dseg 0xf0000
pnp: 00:0b: ioport range 0x1000-0x107f has been reserved
pnp: 00:0b: ioport range 0x1080-0x109f has been reserved
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
PCI: Cannot allocate resource region 4 of device .&checktime(0000,00,02,':').1
vesafb: framebuffer at 0xe0000000, mapped to 0xf0807000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:f060
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.5 [Flags: R/W].
udf: registering filesystem
Supermount version 2.0.2a for kernel 2.6
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [FUTS]
ACPI: Fan [FAN] (on)
bootsplash 3.1.3-2003年11月14日: looking for picture.... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3).
Console: switching to colour frame buffer device 122x40
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 740 chipset
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: AGP aperture is 64M @ 0xe8000000
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xf181a000, 00:30:1b:11:1a:95, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot .&checktime(0000,00,02,':').5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 961 MuTIOL IDE UDMA100 controller
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L080AVVA07-0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
hdd: Maxtor 6Y120L0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > p3 p4 < p6 >
hdd: max request size: 128KiB
hdd: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus1/target1/lun0: p1 p2 p3 < p5 >
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
ohci1394: $Rev$ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[ee003000-ee0037ff] Max Packet=[2048]
video1394: Installed video1394 module
Console: switching to colour frame buffer device 122x40
ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd .&checktime(0000,00,02,':').2: OHCI Host Controller
ohci_hcd .&checktime(0000,00,02,':').2: irq 9, pci mem f1841000
ohci_hcd .&checktime(0000,00,02,':').2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd .&checktime(0000,00,02,':').3: OHCI Host Controller
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301b1100001a95]
ohci_hcd .&checktime(0000,00,02,':').3: irq 5, pci mem f1843000
ohci_hcd .&checktime(0000,00,02,':').3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 KBD port at 0x60,0x64 irq 1
i2c /dev entries driver
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Couldn't find valid RAM disk image starting at 0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
hub 1-0:1.0: new USB device on port 1, assigned address 2
drivers/usb/input/hid-ff.c: hid_ff_init could not find initializer
input: USB HID v1.00 Keyboard [ USB Multimedia Keyboard ] on usb-.&checktime(0000,00,02,':').2-1drivers/usb/input/hid-ff.c: hid_ff_init could not find initializer
input: USB HID v1.00 Device [ USB Multimedia Keyboard ] on usb-.&checktime(0000,00,02,':').2-1
hub 1-0:1.0: new USB device on port 2, assigned address 3
drivers/usb/input/hid-ff.c: hid_ff_init could not find initializer
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-.&checktime(0000,00,02,':').2-2
hub 2-0:1.0: new USB device on port 1, assigned address 2
usbaudio: device 2 audiocontrol interface 1 has 1 input and 0 output AudioStreaming interfaces
usbaudio: valid input sample rate 44100
usbaudio: device 2 interface 2 altsetting 1: format 0x00000010 sratelo 44100 sratehi 44100 attributes 0x00
usbaudio: valid input sample rate 22050
usbaudio: device 2 interface 2 altsetting 2: format 0x00000010 sratelo 22050 sratehi 22050 attributes 0x00
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 2 altsetting 3: format 0x00000010 sratelo 11025 sratehi 11025 attributes 0x00
usbaudio: valid input sample rate 8000
usbaudio: device 2 interface 2 altsetting 4: format 0x00000010 sratelo 8000 sratehi 8000 attributes 0x00
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 3 type 0x0101
usbaudio: warning: found 1 of 0 logical channels.
usbaudio: assuming the channel found is the master channel (got a Philips camera?). Should be fine.
usbaudio: registered mixer 14,0
usb_audio_parsecontrol: usb_audio_state at ef09e8c0
drivers/usb/core/usb.c: registered new driver audio
drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver
Adding 979956k swap on /dev/hda3. Priority:-1 extents:1
EXT3 FS on hda6, internal journal
SCSI subsystem initialized
nvidia: no version for "struct_module" found: kernel tainted.
nvidia: no version magic, tainting kernel.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-5328 Wed Dec 17 13:54:51 PST 2003
pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.11 loaded.
pwc Also supports the Askey VC010, various Logitech QuickCams, Samsung MPC-C10 and MPC-C30,
pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
pwc Philips PCVC740K (ToUCam Pro) USB webcam detected.
videodev: "Philips 740 webcam" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/(...)
pwc Registered as /dev/video0.
drivers/usb/core/usb.c: registered new driver Philips webcam
pwcx: no version magic, tainting kernel.
pwcx: module license 'unspecified' taints kernel.
pwc Philips webcam decompressor routines version 8.3
pwc Supports all cameras supported by the main module (pwc).
pwc Adding decompressor for model 645.
pwc Adding decompressor for model 646.
pwc Adding decompressor for model 675.
pwc Adding decompressor for model 680.
pwc Adding decompressor for model 690.
pwc Adding decompressor for model 720.
pwc Adding decompressor for model 730.
pwc Adding decompressor for model 740.
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
blk: queue efadfe00, I/O limit 4095Mb (mask 0xffffffff)
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
blk: queue efadf200, I/O limit 4095Mb (mask 0xffffffff)
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04Aborted Command
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
bootsplash 3.1.3-2003年11月14日: looking for picture.... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.3-2003年11月14日: looking for picture.... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.3-2003年11月14日: looking for picture.... silentjpeg size 21768 bytes,<1>Unable to handle kernel paging request at virtual address f19a27a4
printing eip:
c02cde24
*pde = 2fd35067
*pte = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[] Tainted: PF
EFLAGS: 00010202
EIP is at col221111_16+0x214/0x3b0
eax: 00000020 ebx: 000064a0 ecx: f19a2680 edx: 00000000
esi: 00006000 edi: 00000004 ebp: ffffffd6 esp: ef0ffdf4
ds: 007b es: 007b ss: 0068
Process splash (pid: 5424, threadinfo=ef0fe000 task=efa686e0)
Stack: 0000003e fffffff7 f19a2a60 f19a2680 f1cafb80 f1caf380 00000003 00000002
f19a2c40 f19a2000 f19a2640 00000040 c02ccdbe f19a2640 f1cae380 00000800
00000400 00000001 00000740 f1d22540 f1cae380 f19a2e40 f19a2d40 0000001d
Call Trace:
[] jpeg_decode+0x59e/0x5d0
[] splash_check_jpeg+0x63/0xd0
[] splash_getraw+0x78e/0x8d0
[] link_path_walk+0x5f0/0x8f0
[] splash_write_proc+0x430/0x450
[] proc_file_write+0x0/0x50
[] proc_file_write+0x37/0x50
[] vfs_write+0xb8/0x130
[] sys_write+0x42/0x70
[] syscall_call+0x7/0xb

Code: 8b 54 c1 24 8d 44 15 05 3d ff 00 00 00 0f 87 c9 00 00 00 89
<6>bootsplash 3.1.3-2003年11月14日: looking for picture.... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.3-2003年11月14日: looking for picture.... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.3-2003年11月14日: looking for picture.... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3).
bootsplash: status on console 5 changed to on
inserting floppy driver for 2.6.0-gentoo
FDC 0 is a post-1991 82077
eth0: no IPv6 routers present
unable to register OSS PCM device 0:0
unable to register OSS mixer device 0:0
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
0: NVRM: client supports wrong rm api version!!
0: NVRM: aborting to avoid catastrophe!
0: NVRM: client supports wrong rm api version!!
0: NVRM: aborting to avoid catastrophe!
usbaudio: dma timed out??