Re: Note pour plus tard : éviter cygwin avec autoconf/make

Si ça continue avec les journaux longs, je poste mon dmesg !
D'ailleurs, je le fais séant, na !

---------------

yaourt% dmesg
OpenBSD 3.1-current (YAOURT) #102: Thu Jul 18 14:06:07 CEST 2002
jyb@yaourt:/usr/src/sys/arch/i386/compile/YAOURT
cpu0: AMD Athlon Model 2 ("AuthenticAMD" 686-class) 699 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 536391680 (523820K)
avail mem = 494223360 (482640K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ad) BIOS, date 04/25/00, BIOS32 rev. 0 @ 0xfb390
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb810
pcibios0: config mechanism [1][x], special cycles [1][x], last bus 1
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfde60/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
PIR Entry 0:
Bus: 0 Device: 8
INTA: link 0x01 bitmap 0xdeb8
INTB: link 0x02 bitmap 0xdeb8
INTC: link 0x03 bitmap 0xdeb8
INTD: link 0x04 bitmap 0xdeb8
PIR Entry 1:
Bus: 0 Device: 9
INTA: link 0x02 bitmap 0xdeb8
INTB: link 0x03 bitmap 0xdeb8
INTC: link 0x04 bitmap 0xdeb8
INTD: link 0x01 bitmap 0xdeb8
PIR Entry 2:
Bus: 0 Device: 10
INTA: link 0x03 bitmap 0xdeb8
INTB: link 0x04 bitmap 0xdeb8
INTC: link 0x01 bitmap 0xdeb8
INTD: link 0x02 bitmap 0xdeb8
PIR Entry 3:
Bus: 0 Device: 11
INTA: link 0x04 bitmap 0xdeb8
INTB: link 0x01 bitmap 0xdeb8
INTC: link 0x02 bitmap 0xdeb8
INTD: link 0x03 bitmap 0xdeb8
PIR Entry 4:
Bus: 0 Device: 12
INTA: link 0x01 bitmap 0xdeb8
INTB: link 0x02 bitmap 0xdeb8
INTC: link 0x03 bitmap 0xdeb8
INTD: link 0x04 bitmap 0xdeb8
PIR Entry 5:
Bus: 0 Device: 7
INTA: link 0x01 bitmap 0xdeb8
INTB: link 0x02 bitmap 0xdeb8
INTC: link 0x03 bitmap 0xdeb8
INTD: link 0x04 bitmap 0xdeb8
PIR Entry 6:
Bus: 0 Device: 1
INTA: link 0x01 bitmap 0xdeb8
INTB: link 0x02 bitmap 0xdeb8
INTC: link 0x03 bitmap 0xdeb8
INTD: link 0x04 bitmap 0xdeb8
pcibios0: PCI Interrupt Router at 000:07:0 ("AMD 756 Power Mgmt" rev 0x00)
pciintr_link_fixup: PIRQ 0x00 is already connected to IRQ 12
pciintr_link_fixup: PIRQ 0x01 is already connected to IRQ 10
pciintr_link_fixup: PIRQ 0x02 is already connected to IRQ 11
pciintr_link_fixup: PIRQ 0x03 is already connected to IRQ 5
pciintr_link_fixup: piirq 0x1c20
PCI bridge 0: primary 0, secondary 1, subordinate 1
pcibios0: PCI bus #1 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 1022:7006
10h mem 0xd8000000 0x04000000
14h mem 0xe3009000 0x00001000
18h port 0x0000e000 0x00000004
[OK]
000:01:0 1022:7007
[OK]
000:07:0 1022:7408
[OK]
000:07:1 1022:7409
20h port 0x0000f000 0x00000010
[OK]
000:07:3 1022:740b
[OK]
000:07:4 1022:740c
10h mem 0xe300c000 0x00001000
[OK]
000:08:0 1106:3043
10h port 0x0000e400 0x00000080
14h mem 0xe3008000 0x00000080
[OK]
000:09:0 109e:036e
10h mem 0xe300a000 0x00001000
[OK]
000:09:1 109e:0878
10h mem 0xe300b000 0x00001000
[OK]
000:10:0 1073:0010
10h mem 0xe3000000 0x00008000
14h port 0x0000e800 0x00000040
18h port 0x0000ec00 0x00000004
[OK]
001:05:0 1002:5246
10h mem 0xdc000000 0x04000000
14h port 0x0000d000 0x00000100
18h mem 0xe1000000 0x00004000
[OK]
--------------------------[ 0 devices bogus]
Physical memory end: 0x1ffee000
PCI memory mapped I/O space start: 0x20000000
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "AMD 751 System Controller" rev 0x23
ppb0 at pci0 dev 1 function 0 "AMD 751 PCI-PCI" rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Rage Magnum" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "AMD 756 PCI-ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "AMD 756 IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC>
wd0: 16-sector PIO, LBA, 19574MB, 16383 cyl, 16 head, 63 sec, 40088160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR,> SCSI0 5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <PIONEER,> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
"AMD 756 Power Mgmt" rev 0x03 at pci0 dev 7 function 3 not configured
ohci0 at pci0 dev 7 function 4 "AMD 756 USB Host" rev 0x060:7:4 1022:740c pin D clink 0x03 irq 5 stage 0 WARNING: preserving irq 5
pci_intr_route_link: route PIRQ 0x03 -> IRQ 5 preserved BIOS setting
: irq 5, OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
vr0 at pci0 dev 8 function 0 "VIA Rhine/RhineII" rev 0x060:8:0 1106:3043 pin A clink 0x00 irq 12 stage 0 WARNING: preserving irq 12
pci_intr_route_link: route PIRQ 0x00 -> IRQ 12 preserved BIOS setting
: irq 12 address 00:50:ba:c4:0a:61
amphy0 at vr0 phy 8: Am79C873 10/100 media interface, rev. 0
bktr0 at pci0 dev 9 function 0 "Brooktree BT878" rev 0x110:9:0 109e:036e pin A clink 0x01 irq 10 stage 0 WARNING: preserving irq 10
pci_intr_route_link: route PIRQ 0x01 -> IRQ 10 preserved BIOS setting
: irq 10
bktr0: Hauppauge Model 61326 D309
bktr0: Detected a MSP3415D-B3 at 0x80
bktr0: Hauppauge WinCast/TV, Philips SECAM tuner, msp3400c stereo, remote control.
"Brooktree BT878 Audio" rev 0x11 at pci0 dev 9 function 1 not configured
yds0 at pci0 dev 10 function 0 "Yamaha 744" rev 0x020:10:0 1073:0010 pin A clink 0x02 irq 11 stage 0 WARNING: preserving irq 11
pci_intr_route_link: route PIRQ 0x02 -> IRQ 11 preserved BIOS setting
: irq 11
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at yds0
pci_intr_post_fixup: PCI IRQs: 12 10 11 5; ISA IRQs: 0 1 2 3 4 6 7 8 9 13 14 15
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
opl0 at yds0: model OPL3
midi1 at opl0: <DS-1>
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
biomask c460 netmask d460 ttymask d4e2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
ugen0 at uhub0 port 1
ugen0: ALCATEL Speed Touch USB, rev 1.10/0.00, addr 2
uhub1 at uhub0 port 2
uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 3
uhub1: 4 ports with 4 removable, bus powered
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.03, addr 4, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0