• [^] # Re: dmesg

    Posté par . En réponse au message Résolu : carte Réseau sur USB de ID 0b95:1790 ASIX Electronics Corp. Évalué à 1.

    quand je débranche et rebranche le périphérique dmesg me dit rien de bien intéressant.

    [ 265.349845] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0008
    [ 265.350486] hub 1-1:1.0: port 3, status 0100, change 0001, 12 Mb/s
    [ 265.351169] usb 1-1.3: USB disconnect, device number 5
    [ 265.351211] usb 1-1.3: unregistering device
    [ 265.351246] usb 1-1.3: unregistering interface 1-1.3:1.0
    [ 265.369785] usb 1-1.3: usb_disable_device nuking all URBs
    [ 265.482788] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
    [ 285.131782] libphy: 4a101000.mdio:00 - Link is Down
    [ 287.939866] net eth0: initializing cpsw version 1.12 (0)
    [ 287.942879] net eth0: phy found : id is : 0x7c0f1
    [ 287.943043] libphy: PHY 4a101000.mdio:01 not found
    [ 287.948158] net eth0: phy 4a101000.mdio:01 not found on slave 1
    [ 287.958958] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 288.881394] net eth0: initializing cpsw version 1.12 (0)
    [ 288.884535] net eth0: phy found : id is : 0x7c0f1
    [ 288.884691] libphy: PHY 4a101000.mdio:01 not found
    [ 288.889793] net eth0: phy 4a101000.mdio:01 not found on slave 1
    [ 288.900570] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 293.030729] libphy: 4a101000.mdio:00 - Link is Up - 100/Half
    [ 293.030846] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 295.126683] net eth0: initializing cpsw version 1.12 (0)
    [ 295.129671] net eth0: phy found : id is : 0x7c0f1
    [ 295.130240] libphy: PHY 4a101000.mdio:01 not found
    [ 295.135334] net eth0: phy 4a101000.mdio:01 not found on slave 1
    [ 295.146012] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 296.625521] net eth0: initializing cpsw version 1.12 (0)
    [ 296.628704] net eth0: phy found : id is : 0x7c0f1
    [ 296.628732] libphy: PHY 4a101000.mdio:01 not found
    [ 296.633838] net eth0: phy 4a101000.mdio:01 not found on slave 1
    [ 296.644665] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 298.636720] libphy: 4a101000.mdio:00 - Link is Up - 100/Half
    [ 298.636836] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [10489.073163] musb_stage0_irq 790: unhandled DISCONNECT transition (a_idle)