Forum Linux.debian/ubuntu [solved] Motion (software) enregistrer vidéos à la place de photo lorsque mouvement détecté

Posté par . Licence CC By‐SA.
Étiquettes :
2
16
mar.
2016

Bien le bonsoir la communauté.
Motion (dernière version) tourne sur un raspberry (raspbian).

Lorsqu'un mouvement est détecté, je souhaiterais désactiver la prise de photo et activer la prise de vidéos.

Les nouvelles options et paramètres de motion sont ici : http://www.lavrsen.dk/foswiki/bin/view/Motion/ConfigFileOptions

Merci d'avance si quelqu'un trouve la solution.

Edit: la prise de vidéos est réussie, j'ai trouvé pour la prise de photos :)

  • # Re:

    Posté par . Évalué à 2. Dernière modification le 17 mars 2016 à 00:19.

    • [^] # Re:

      Posté par . Évalué à 1.

      Il semblerait hélas que ce paramètre (qui est indiqué dans la doc) ne soit pas implémenté

      [0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_cap_new"

      Il y en a d'autres d'ailleurs qui sont aussi indiqué dans la doc et qui ne fonctionnent pas :

      [0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_maxrate"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_motion"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "output_normal"

      merci pour l'aide ;)

      Donation Bitcoin : 1N8QGrhJGWdZNQNSspm3rSGjtXaXv9Ngat

      • [^] # Re:

        Posté par . Évalué à 3.

        C'est peut être une ancienne version qui est dans Raspian.

        regarde la version avec apt-cache show motion et essai de voir si la page man parle des options de configuration man motion

        • [^] # Re:

          Posté par . Évalué à 3.

          EDIT: Sinon il semble que motion gueule "unknown option" pour à peut près n'importe-quelle erreur à l’initialisation (cherche sur google avec les messages d'erreurs), ffmpeg est bien installé ?

          Sinon un tuto pour raspbian semble proposer d'utiliser une build alternative :
          http://raspbian-france.fr/video-surveillance-raspberry-pi-camera/

        • [^] # Re:

          Posté par . Évalué à 0.

          Ah tient pas bête, je sais que la version a changé mais ce n'est peut-être pas la dernière. (pfff ils ont tellement choisis un nom de logiciel pourris que je trouve même pas leur site officiel)

          Package: motion
          Source: motion (3.2.12+git20140228-4)
          Version: 3.2.12+git20140228-4+b2
          Architecture: armhf
          Maintainer: Ximin Luo infinity0@pwned.gg 

           CONFIG FILE OPTIONS
 These are the options that can be used in the config file. They are overridden by the commandline! All number values are integer numbers (no decimals allowed). Boolean
 options can be on or off (values "1", "yes" and "on" all means true and any other value means false).
 area_detect integer
 Values: 0 - 999999999 / Default: Not defined
 Detect motion in predefined areas (1 - 9). Areas are numbered like that: 1 2 3
 A script (on_area_detected) is started immediately when motion is 4 5 6
 detected in one of the given areas, but only once during an event. 7 8 9
 One or more areas can be specified with this option. Take care: This option does NOT restrict detection to these areas! (Default: not defined)
 auto_brightness boolean
 Values: on, off / Default: off
 Let motion regulate the brightness of a video device. Only recommended for cameras without auto brightness
 brightness integer
 Values: 0 - 255 / Default: 0 (disabled)
 The brightness level for the video device.
 contrast boolean
 Values: 0 - 255 / Default: 0 (disabled)
 The contrast level for the video device.
 daemon boolean
 Values: on, off / Default: off
 Start in daemon (background) mode and release terminal. This option must be placed in motion.conf and not in a thread config file.
 database_dbname string
 Values: Max 4095 characters / Default: Not defined
 Name of the database.
 database_host string
 Values: Max 4095 characters / Default: localhost
 IP address or domain name for the database server. Use "localhost" if motion and database runs on the same server.
 database_password string
 Values: Max 4095 characters / Default: Not defined
 The database password.
 database_port integer
 Values: 0 - 65535 / Default: Not defined
 The database server port number.
 database_type discrete strings
 Values: mysql, postgresql / Default: Not defined
 The database type ( mysql , postgresql ).
 database_user string
 Values: Max 4095 characters / Default: Not defined
 The database user name.
 despeckle_filter string
 Values: EedDl / Default: Not defined
 Despeckle motion image using combinations of (E/e)rode or (D/d)ilate. And ending with optional (l)abeling.
 emulate_motion boolean
 Values: on, off / Default: off
 Picture are saved continuously as if motion was detected all the time.
 event_gap integer
 Values: 0 - 2147483647 / Default: 60
 Event Gap is the seconds of no motion detection that triggers the end of an event. An event is defined as a series of motion images taken within a short timeframe.
 exif_text string
 Values: Max 4095 characters / Default: Not defined
 Text to include in a JPEG EXIF comment , may be any text, including conversion specifiers. The EXIF timestamp is included independent of this text.
 extpipe string
 Values: Max 4095 characters / Default: Not defined
 pipe raw video to generally - 'STDIN', allowing to use an external video encoder.
 e.g. using memcoder :
 extpipe mencoder -demuxer rawvideo -rawvideo w=320:h=240:i420 -ovc x264 -x264encopts bframes=4:frameref=1:subq=1:scenecut=-1:nob_adapt:
 threads=1:keyint=1000:8x8dct:vbv_bufsize=4000:crf=24:partitions=i8x8,i4x4:vbv_maxrate=800:no-chroma-me -vf denoise3d=16:12:48:4,pp=lb -of avi -o %f.avi - -fps %fps
 ffmpeg_bps integer
 Values: 0 - 9999999 / Default: 400000
 Bitrate of movies produced by ffmpeg. Bitrate is bits per second. Default: 400000 (400kbps). Higher value mans better quality and larger files. Option requires that ffmpeg
 libraries are installed.
 ffmpeg_output_debug_movies boolean
 Values: on, off / Default: off
 Use ffmpeg libraries to encode motion type movies where you only see the pixels that changes.
 ffmpeg_output_movies boolean
 Values: on, off / Default: off
 Use ffmpeg libraries to encode movies in realtime.
 ffmpeg_deinterlace boolean
 Values: on, off / Default: off
 Use ffmpeg to deinterlace video. Necessary if you use an analog camera and see horizontal combing on moving objects in video or pictures.
 ffmpeg_timelapse integer
 Values: 0 - 2147483647 / Default: 0 (disabled)
 Create a timelapse movie saving a picture frame at the interval in seconds set by this parameter. Set it to 0 if not used.
 ffmpeg_timelapse_mode discrete strings
 Values: hourly, daily, weekly-sunday, weekly-monday, monthly, manual / Default: daily
 The file rollover mode of the timelapse video.
 ffmpeg_variable_bitrate integer
 Values: 0, 2 - 31 / Default: 0 (disabled)
 Enables and defines variable bitrate for the ffmpeg encoder. ffmpeg_bps is ignored if variable bitrate is enabled. Valid values: 0 (default) = fixed bitrate defined by ffm‐
 peg_bps, or the range 2 - 31 where 2 means best quality and 31 is worst.
 ffmpeg_video_codec discrete strings
 Values: mpeg1 (ffmpeg-0.4.8 only), mpeg4, msmpeg4, swf , flv , ffv1, mov, ogg / Default: mpeg4
 Codec to be used by ffmpeg for the video compression. Timelapse movies are always made in mpeg1 format independent from this option.
 framerate integer
 Values: 2 - 100 / Default: 100 (no limit)
 Maximum number of frames to be captured from the camera per second.
 frequency integer
 Values: 0 - 999999 / Default: 0 (Not set)
 The frequency to set the tuner to (kHz). Valid range: per tuner spec, default: 0 (Don't set it)
 height integer
 Values: Device Dependent / Default: 288
 The height of each frame in pixels.
 hue integer
 Values: 0 - 255 / Default: 0 (disabled)
 The hue level for the video device.
 input integer
 Values: -1 - 64, -1 = disabled / Default: -1 (disabled)
 Input channel to use expressed as an integer number starting from -1. Should normally be set to 1 for video/TV cards, and -1 for USB cameras.
 ipv6_enabled boolean
 Values: on, off / Default: off
 Enable or disable IPV6 for http control and stream.
 lightswitch integer
 Values: 0 - 100 / Default: 0 (disabled)
 Ignore sudden massive light intensity changes given as a percentage of the picture area that changed intensity.
 locate_motion discrete strings
 Values: on, off, redbox, center, redcross, preview / Default: off
 Locate and draw a box around the moving object. Value 'preview' makes Motion only draw a box on a saved preview jpeg image and not on the saved movie.
 logfile string
 Values: Max 4095 characters / Default: Not defined
 Use a file to save logs messages, if not defined stderr and syslog is used.
 logfile string
 Values: Max 4095 characters / Default: Not defined
 Use a file to save logs messages, if not defined stderr and syslog is used. ( if syslog is set then will log to stderr and syslog )
 log_level integer
 Values: 1 - 9 / Default: 6
 Level of log messages [1..9] (EMR, ALR, CRT, ERR, WRN, NTC, ERR, DBG, ALL). (default: 6 / NTC).
 log_type discrete strings
 Values: STR, ENC, NET, DBL, EVT, TRK, VID, ALL / Default: ALL
 Filter to log messages by type (STR, ENC, NET, DBL, EVT, TRK, VID, ALL).
 mask_file string
 Values: Max 4095 characters / Default: Not defined
 PGM file to use as a sensitivity mask. This picture MUST have the same width and height as the frames being captured and be in binary format.
 max_movie_time integer
 Values: 0 (infinite) - 2147483647 / Default: 3600
 The maximum length of a movie in seconds. Set this to zero for unlimited length.
 minimum_frame_time integer
 Values: 0 - 2147483647 / Default: 0
 Minimum time in seconds between the capturing picture frames from the camera. Default: 0 = disabled - the capture rate is given by the camera framerate.
 minimum_motion_frames integer
 Values: 1 - 1000s / Default: 1
 Picture frames must contain motion at least the specified number of frames in a row before they are detected as true motion. At the default of 1, all motion is detected. Valid
 range is 1 to thousands, but it is recommended to keep it within 1-5.
 motion_video_pipe string
 Values: Max 4095 characters / Default: Not defined
 The video4linux video loopback input device for motion images. If a particular pipe is to be used then use the device filename of this pipe, if a dash '-' is given motion will
 use /proc/video/vloopback/vloopbacks to locate a free pipe. Default: not set
 movie_filename string
 Values: Max 4095 characters / Default: %v-%Y%m%d%H%M%S
 File path for motion triggered ffmpeg movies relative to target_dir. This was previously called ffmpeg_filename.
 netcam_tolerant_check boolean
 Values: on, off / Default: off
 Set less strict jpeg checks for network cameras with a poor/buggy firmware.
 netcam_keepalive discrete string
 Values: off , force, on / Default: off
 The setting for keep-alive of network socket, should improve performance on compatible net cameras.
 netcam_proxy string
 Values: Max 4095 characters / Default: Not defined
 URL to use for a netcam proxy server, if required. The syntax is http://myproxy:portnumber
 netcam_url string
 Values: Max 4095 characters / Default: Not defined
 Specify an url to a downloadable jpeg file or raw mjpeg stream to use as input device. Such as an AXIS 2100 network camera.
 http:// ftp:// mjpg:// or file:/// ( mjpg:// is for network cameras with codec mjpeg ).
 netcam_userpass string
 Values: Max 4095 characters / Default: Not defined
 For network cameras protected by username and password, use this option for HTTP 1.1 Basic authentication. The string is specified as username:password. Do not specify this
 option for no authentication.
 noise_level integer
 Values: 1 - 255 / Default: 32
 The noise level is used as a threshold for distinguishing between noise and motion.
 noise_tune boolean
 Values: on, off / Default: on
 Activates the automatic tuning of noise level.
 norm integer
 Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour) / Default: 0 (PAL)
 Select the norm of the video device. Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
 on_area_detected string
 Values: Max 4095 characters / Default: Not defined
 Command to be executed when motion in a predefined area is detected, check option area_detect.
 on_camera_lost
 Values: Max 4095 characters / Default: Not defined
 Command to be executed when a camera can't be opened or if it is lost. You can use Conversion Specifiers and spaces as part of the command. Use %f for passing filename (with
 full path) to the command.
 on_event_end string
 Values: Max 4095 characters / Default: Not defined
 Command to be executed when an event ends after a period of no motion. The period of no motion is defined by option event_gap. You can use Conversion Specifiers and spaces as
 part of the command.
 on_event_start string
 Values: Max 4095 characters / Default: Not defined
 Command to be executed when an event starts. An event starts at first motion detected after a period of no motion defined by event_gap. You can use ConversionSpecifiers and
 spaces as part of the command.
 on_motion_detected string
 Values: Max 4095 characters / Default: Not defined
 Command to be executed when a motion frame is detected. You can use Conversion Specifiers and spaces as part of the command.
 on_movie_end string
 Values: Max 4095 characters / Default: Not defined
 Command to be executed when an ffmpeg movie is closed at the end of an event. You can use Conversion Specifiers and spaces as part of the command. Use %f for passing filename
 (with full path) to the command.
 on_movie_start string
 Values: Max 4095 characters / Default: Not defined
 Command to be executed when a movie is created. You can use Conversion Specifiers and spaces as part of the command. Use %f for passing filename (with full path) to the com‐
 mand.
 on_picture_save string
 Values: Max 4095 characters / Default: Not defined
 Command to be executed when an image is saved. You can use Conversion Specifiers and spaces as part of the command. Use %f for passing filename (with full path) to the com‐
 mand.
 output_debug_pictures boolean
 Values: on, off / Default: off
 Output pictures with only the moving object. This feature generates the special motion type movies where you only see the pixels that changes as a graytone image. If labelling
 is enabled you see the largest area in blue. Smartmask is shown in red.
 output_pictures discrete strings
 Values: on, off, first, best, center / Default: on
 Normal image is an image that is stored when motion is detected. It is the same image that was taken by the camera. I.e. not a motion image like defined by output_motion.
 Default is that normal images are stored.
 picture_filename string
 Values: Max 4095 characters / Default: %v-%Y%m%d%H%M%S-%q
 File path for motion triggered images (jpeg or ppm) relative to target_dir. Value 'preview' makes a jpeg filename with the same name body as the associated saved movie file.
 picture_type discrete strings
 Values: jpeg , ppm / Default: jpeg
 Type of images motion will trigger when motion is detected.
 post_capture integer
 Values: 0 - 2147483647 / Default: 0 (disabled)
 Specifies the number of frames to be captured after motion has been detected.
 pre_capture integer
 Values: 0 - 100s / Default: 0 (disabled)
 Specifies the number of previous frames to be outputted at motion detection. Recommended range: 0 to 5, default=0. Do not use large values! Large values will cause Motion to
 skip video frames and cause unsmooth movies. To smooth movies use larger values of post_capture instead.
 process_id_file string
 Values: Max 4095 characters / Default: Not defined
 File to store the process ID, also called pid file. Recommended value when used: /var/run/motion.pid
 quality integer
 Values: 1 - 100 / Default: 75
 The quality for the jpeg images in percent.
 quiet boolean
 Values: on, off / Default: off
 Be quiet, don't output beeps when detecting motion.
 rotate discrete strings
 Values: 0, 90, 180, 270 / Default: 0 (not rotated)
 Rotate image the given number of degrees. The rotation affects all saved images as well as movies.
 roundrobin_frames integer
 Values: 1 - 2147483647 / Default: 1
 Specifies the number of frames to capture before switching inputs, this way also slow switching (e.g. every second) is possible.
 roundrobin_skip integer
 Values: 1 - 2147483647 / Default: 1
 Specifies the number of frames to skip after a switch. (1 if you are feeling lucky, 2 if you want to be safe).
 saturation integer
 Values: 0 - 255 / Default: 0 (disabled)
 The colour saturation level for the video device.
 sdl_threadnr
 Values: 0 - 2147483647 / Default: 0 (disabled)
 Number of motion thread to show in SDL Window (default: 0 = disabled)
 setup_mode boolean
 Values: on, off / Default: off
 Run Motion in setup mode.
 smart_mask_speed integer
 Values: 0 - 10 / Default: 0 (disabled)
 Slugginess of the smart mask. Default is 0 = DISABLED. 1 is slow, 10 is fast.
 snapshot_filename string
 Values: Max 4095 characters / Default: %v-%Y%m%d%H%M%S-snapshot
 File path for snapshots (jpeg or ppm) relative to target_dir.
 snapshot_interval integer
 Values: 0 - 2147483647 / Default: 0 (disabled)
 Make automated snapshots every 'snapshot_interval' seconds.
 sql_log_picture boolean
 Values: on, off / Default: on
 Log to the database when creating motion triggered image file.
 sql_log_movie boolean
 Values: on, off / Default: off
 Log to the database when creating motion triggered movie file.
 sql_log_snapshot boolean
 Values: on, off / Default: on
 Log to the database when creating a snapshot image file.
 sql_log_timelapse boolean
 Values: on, off / Default: off
 Log to the database when creating timelapse movie file
 sql_query string
 Values: Max 4095 characters / Default: insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
 SQL query string that is sent to the database. The values for each field are given by using convertion specifiers
 stream_auth_method integer
 Values: 0 = disabled , 1 = Basic authentication ,2 = MD5 digest (the safer authentication). / Default: 0 (disabled)
 Set the authentication method for stream.
 stream_authentication string
 Values: username:password / Default: not defined (disabled)
 Authentication for the stream.
 stream_limit integer
 Values: 0 - 2147483647 / Default: 0 (unlimited)
 Limit the number of frames to number frames. After 'stream_limit' number of frames the connection will be closed by motion. The value 0 means unlimited.
 stream_localhost boolean
 Values: on, off / Default: on
 Limits the access to the stream to the localhost.
 stream_maxrate integer
 Values: 1 - 100 / Default: 1
 Limit the framerate of the stream in frames per second. Default is 1. Set the value to 100 for practically unlimited.
 stream_motion boolean
 Values: on, off / Default: off
 If set to 'on' Motion sends slows down the stream to 1 picture per second when no motion is detected. When motion is detected the stream runs as defined by stream_maxrate.
 When 'off' the stream always runs as defined by stream_maxrate.
 stream_port integer
 Values: 0 - 65535 / Default: 0 (disabled)
 TCP port on which motion will listen for incoming connects with its stream server.
 stream_quality integer
 Values: 1 - 100 / Default: 50
 Quality setting in percent for the mjpeg picture frames transferred over the stream connection. Keep it low to restrict needed bandwidth.
 switchfilter boolean
 Values: on, off / Default: off
 Turns the switch filter on or off. The filter can distinguish between most switching noise and real motion. With this you can even set roundrobin_skip to 1 without generating
 much false detection.
 target_dir string
 Values: Max 4095 characters / Default: Not defined = current working directory
 Target directory for picture and movie files.
 text_changes boolean
 Values: on, off / Default: off
 Turns the text showing changed pixels on/off.
 text_double boolean
 Values: on, off / Default: off
 Draw characters at twice normal size on images.
 text_event string
 Values: Max 4095 characters / Default: %Y%m%d%H%M%S
 This option defines the value of the special event conversion specifier %C. You can use any conversion specifier in this option except %C. Date and time values are from the
 timestamp of the first image in the current event.
 text_left string
 Values: Max 4095 characters / Default: Not defined
 User defined text overlayed on each in the lower left corner. Use A-Z, a-z, 0-9, " / ( ) @ ~ # < > | , . : - + _ \n and conversion specifiers (codes starting by a %).
 text_right string
 Values: Max 4095 characters / Default: %Y-%m-%d\n%T
 User defined text overlayed on each in the lower right corner. Use A-Z, a-z, 0-9, " / ( ) @ ~ # < > | , . : - + _ \n and conversion specifiers (codes starting by a %).
 Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
 thread string
 Values: Max 4095 characters / Default: Not defined
 Specifies full path and filename for a thread config file. Each camera needs a thread config file containing the options that are unique to the camera. If you only have one
 camera you do not need thread config files. If you have two or more cameras you need one thread config file for each camera in addition to motion.conf. This option must be
 placed in motion.conf and not in a thread config file.
 threshold integer
 Values: 1 - 2147483647 / Default: 1500
 Threshold for declaring motion. The threshold is the number of changed pixels counted after noise filtering, masking, despeckle, and labelling.
 threshold_tune boolean
 Values: on, off / Default: off
 Activates the automatic tuning of threshold level.
 timelapse_filename string
 Values: Max 4095 characters / Default: %v-%Y%m%d-timelapse
 File path for timelapse movies relative to target_dir (ffmpeg only).
 track_auto boolean
 Values: on, off / Default: off
 Enable auto tracking
 track_iomojo_id integer
 Values: 0 - 65535 / Default: 0
 Use this option if you have an iomojo smilecam connected to the serial port instead of a general stepper motor controller.
 track_maxx integer
 Values: 0 - 65535 / Default: 0
 The maximum position for servo x.
 track_maxy integer
 Values: 0 - 65535 / Default: 0
 The maximum position for servo y.
 track_motorx integer
 Values: 0 - 65535 / Default: 0
 The motor number that is used for controlling the x-axis.
 track_motory integer
 Values: 0 - 65535 / Default: 0
 The motor number that is used for controlling the y-axis.
 track_move_wait integer
 Values: 0 - 65535 / Default: 10
 Delay during which tracking is disabled after auto tracking has moved the camera. Delay is defined as number of picture frames.
 track_port string
 Values: Max 4095 characters / Default: Not defined
 This is the device name of the serial port to which the stepper motor interface is connected.
 track_speed integer
 Values: 0 - 255 / Default: 255
 Speed to set the motor to.
 track_step_angle_x integer
 Values: 0-90 / Default: 10
 Angle in degrees the camera moves per step on the X-axis with auto tracking. Currently only used with pwc type cameras.
 track_step_angle_y integer
 Values: 0-40 / Default: 10
 Angle in degrees the camera moves per step on the Y-axis with auto tracking. Currently only used with pwc type cameras.
 track_stepsize integer
 Values: 0 - 255 / Default: 40
 Number of steps to make.
 track_type discrete strings
 Values: 0 (none), 1 (stepper), 2 (iomojo), 3 (pwc), 4 (generic), 5 (uvcvideo) / Default: 0 (None)
 Type of tracker.
 tunerdevice string
 Values: Max 4095 characters / Default: /dev/tuner0
 The tuner device used for controlling the tuner in a tuner card. This option is only used when Motion is compiled for FreeBSD.
 use_extpipe boolean
 Values: on, off / Default: off
 Enables extpipe to use an external video encoder feeding with YUV420 using a pipe .
 v4l2_palette discrete strings
 Values: 0 - 8 / Default: 8
 Allow to choose preferable palette to be use by motion to capture from those supported by your videodevice.
 video_pipe string
 Values: Max 4095 characters / Default: Not defined
 The video4linux video loopback input device for normal images. If a particular pipe is to be used then use the device filename of this pipe. If a dash '-' is given motion will
 use /proc/video/vloopback/vloopbacks to locate a free pipe.
 videodevice string
 Values: Max 4095 characters / Default: /dev/video0 (FreeBSD: /dev/bktr0)
 The video device to be used for capturing. Default for Linux is /dev/video0. for FreeBSD the default is /dev/bktr0.
 webcontrol_authentication string
 Values: Max 4096 characters / Default: Not defined
 To protect HTTP Control by username and password, use this option for HTTP 1.1 Basic authentication. The string is specified as username: password. Do not specify this
 option for no authentication. This option must be placed in motion.conf and not in a thread config file.
 webcontrol_html_output boolean
 Values: on, off / Default: on
 Enable HTML in the answer sent back to a browser connecting to the webcontrol_port. This option must be placed in motion.conf and not in a thread config file.
 webcontrol_localhost boolean
 Values: on, off / Default: on
 Limits the webcontrol to the localhost. This option must be placed in motion.conf and not in a thread config file.
 webcontrol_port integer
 Values: 0 - 65535 / Default: 0 (disabled)
 Sets the port number for the http (html using browser) based remote webcontrol. This option must be placed in motion.conf and not in a thread config file.
 width integer
 Values: Device Dependent / Default: 352
 The width in pixels of each frame. Valid range is camera dependent.

          Donation Bitcoin : 1N8QGrhJGWdZNQNSspm3rSGjtXaXv9Ngat

          • [^] # Re:

            Posté par . Évalué à 4. Dernière modification le 17 mars 2016 à 01:25.

            ffmpeg_output_movies à essayer.

            Ta config fonctionne déjà en mode capture d'image ?

            • [^] # Re:

              Posté par . Évalué à 2.

              ffmpeg_output_movies à essayer.

              ça fonctionne ! merci !!!

              [1] [NTC] [EVT] event_newfile: File of type 8 saved to: /home/pi/motion/test/01-20160317003002.avi

              Reste a supprimer la prise de photo et le soft fera enfin ce qu'on attend de lui :)

              Donation Bitcoin : 1N8QGrhJGWdZNQNSspm3rSGjtXaXv9Ngat

              • [^] # Re:

                Posté par . Évalué à 2. Dernière modification le 17 mars 2016 à 02:49.

                J'ai trouvé comment arrêter la prise de photo:

                output_pictures off

                Merci pour ton aide Tonton Benoit

                Donation Bitcoin : 1N8QGrhJGWdZNQNSspm3rSGjtXaXv9Ngat

Suivre le flux des commentaires

Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.