Postfix manual - pcre_table(5)

PCRE_TABLE(5) PCRE_TABLE(5)
NAME 
 pcre_table - format of Postfix PCRE tables
SYNOPSIS 
 postmap -q "string" pcre:/etc/postfix/filename
 postmap -q - pcre:/etc/postfix/filename <inputfile
 postmap -hmq - pcre:/etc/postfix/filename <inputfile
 postmap -bmq - pcre:/etc/postfix/filename <inputfile
DESCRIPTION 
 The Postfix mail system uses optional tables for address rewriting,
 mail routing, or access control. These tables are usually in dbm or db
 format.
 Alternatively, lookup tables can be specified in Perl Compatible Regu-
 lar Expression form. In this case, each input is compared against a
 list of patterns. When a match is found, the corresponding result is
 returned and the search is terminated.
 To find out what types of lookup tables your Postfix system supports
 use the "postconf -m" command.
 To test lookup tables, use the "postmap -q" command as described in the
 SYNOPSIS above. Use "postmap -hmq - <file" for header_checks(5) pat-
 terns, and "postmap -bmq - <file" for body_checks(5) (Postfix 2.6 and
 later).
 This driver can be built with the pcre2 library (Postfix 3.7 and
 later), or with the legacy pcre library (all Postfix versions).
COMPATIBILITY 
 With Postfix version 2.2 and earlier specify "postmap -fq" to query a
 table that contains case sensitive patterns. Patterns are case insensi-
 tive by default.
TABLE FORMAT 
 The general form of a PCRE table is:
 /pattern/flags result
 When pattern matches the input string, use the corresponding
 result value.
 !/pattern/flags result
 When pattern does not match the input string, use the corre-
 sponding result value.
 if /pattern/flags
 endif If the input string matches /pattern/, then match that input
 string against the patterns between if and endif. The if..endif
 can nest.
 Note: do not prepend whitespace to patterns inside if..endif.
 This feature is available in Postfix 2.1 and later.
 if !/pattern/flags
 endif If the input string does not match /pattern/, then match that
 input string against the patterns between if and endif. The
 if..endif can nest.
 Note: do not prepend whitespace to patterns inside if..endif.
 This feature is available in Postfix 2.1 and later.
 blank lines and comments
 Empty lines and whitespace-only lines are ignored, as are lines
 whose first non-whitespace character is a `#'.
 multi-line text
 A logical line starts with non-whitespace text. A line that
 starts with whitespace continues a logical line.
 Each pattern is a perl-like regular expression. The expression delim-
 iter can be any non-alphanumeric character, except whitespace or char-
 acters that have special meaning (traditionally the forward slash is
 used). The regular expression can contain whitespace.
 By default, matching is case-insensitive, and newlines are not treated
 as special characters. The behavior is controlled by flags, which are
 toggled by appending one or more of the following characters after the
 pattern:
 i (default: on)
 Toggles the case sensitivity flag. By default, matching is case
 insensitive.
 m (default: off)
 Toggles the pcre MULTILINE flag. When this flag is on, the ^ and
 $ metacharacters match immediately after and immediately before
 a newline character, respectively, in addition to matching at
 the start and end of the subject string.
 s (default: on)
 Toggles the pcre DOTALL flag. When this flag is on, the .
 metacharacter matches the newline character. With Postfix ver-
 sions prior to 2.0, the flag is off by default, which is incon-
 venient for multi-line message header matching.
 x (default: off)
 Toggles the pcre extended flag. When this flag is on, whitespace
 characters in the pattern (other than in a character class) are
 ignored. To include a whitespace character as part of the pat-
 tern, escape it with backslash.
 Note: do not use #comment after patterns.
 A (default: off)
 Toggles the pcre ANCHORED flag. When this flag is on, the pat-
 tern is forced to be "anchored", that is, it is constrained to
 match only at the start of the string which is being searched
 (the "subject string"). This effect can also be achieved by
 appropriate constructs in the pattern itself.
 E (default: off)
 Toggles the pcre DOLLAR_ENDONLY flag. When this flag is on, a $
 metacharacter in the pattern matches only at the end of the sub-
 ject string. Without this flag, a dollar also matches immedi-
 ately before the final character if it is a newline character
 (but not before any other newline characters). This flag is
 ignored if the pcre MULTILINE flag is set.
 U (default: off)
 Toggles the pcre UNGREEDY flag. When this flag is on, the pat-
 tern matching engine inverts the "greediness" of the quantifiers
 so that they are not greedy by default, but become greedy if
 followed by "?". This flag can also set by a (?U) modifier
 within the pattern.
 X (default: off)
 Toggles the pcre EXTRA flag. When this flag is on, any back-
 slash in a pattern that is followed by a letter that has no spe-
 cial meaning causes an error, thus reserving these combinations
 for future expansion.
 This feature is not supported with PCRE2.
SEARCH ORDER 
 Patterns are applied in the order as specified in the table, until a
 pattern is found that matches the input string.
 Each pattern is applied to the entire input string. Depending on the
 application, that string is an entire client hostname, an entire client
 IP address, or an entire mail address. Thus, no parent domain or par-
 ent network search is done, and user@domain mail addresses are not bro-
 ken up into their user and domain constituent parts, nor is user+foo
 broken up into user and foo.
TEXT SUBSTITUTION 
 Substitution of substrings (text that matches patterns inside "()")
 from the matched expression into the result string is requested with
 1,ドル 2,ドル etc.; specify $$ to produce a $ character as output. The
 macros in the result string may need to be written as ${n} or $(n) if
 they aren't followed by whitespace. This feature does not support
 pcre2 substring names.
 Note: since negated patterns (those preceded by !) return a result when
 the expression does not match, substitutions are not available for
 negated patterns.
INLINE SPECIFICATION 
 The contents of a table may be specified in the table name (Postfix 3.7
 and later). The basic syntax is:
 main.cf:
 parameter = .. pcre:{ { rule-1 }, { rule-2 } .. } ..
 master.cf:
 .. -o { parameter = .. pcre:{ { rule-1 }, { rule-2 } .. } .. } ..
 Postfix recursively expands any $parametername instances in the above
 parameter value, ignores whitespace after '{' and before '}', and
 writes each rule as one text line to an in-memory file:
 in-memory file:
 rule-1
 rule-2
 ..
 Postfix parses the result as if it is a file in /etc/postfix.
INLINE SPECIFICATION CAVEATS 
 o When using $parametername inside an inlined pattern, use
 \Q$parametername\E to disable metacharacters such as '.' in the
 $parametername expansion. Otherwise, the pattern may have unex-
 pected matches.
 o When an inlined rule must contain $, specify $$ to keep Postfix
 from trying to do $name expansion as it evaluates a parameter
 value. To check an inline configuration, use the "postconf -x"
 option as shown below:
 o When a main.cf "parametername = value" setting contains
 an inline pcre: table, use the command "postconf -x
 parametername". Verify that there are no "undefined
 parameter" warnings, and that the output has the syntax
 that one would use in a non-inlined Postfix pcre: file.
 o When a master.cf "-o { parametername = value }" override
 contains an inline pcre: table, use the command "postconf
 -Px '*/*/parametername' ". Verify that there are no
 "undefined parameter" warnings, and that the output has
 the syntax that one would use in a non-inlined Postfix
 pcre: file.
EXAMPLE SMTPD ACCESS MAP 
 # Protect your outgoing majordomo exploders
 /^(?!owner-)(.*)-outgoing@(.*)/ 550 Use ${1}@${2} instead
 # Bounce friend@whatever, except when whatever is our domain (you would
 # be better just bouncing all friend@ mail - this is just an example).
 /^(friend@(?!my\.domain$).*)$/ 550 Stick this in your pipe 1ドル
 # A multi-line entry. The text is sent as one line.
 #
 /^noddy@my\.domain$/
 550 This user is a funny one. You really don't want to send mail to
 them as it only makes their head spin.
EXAMPLE HEADER FILTER MAP 
 /^Subject: make money fast/ REJECT
 /^To: friend@public\.com/ REJECT
EXAMPLE BODY FILTER MAP 
 # First skip over base 64 encoded text to save CPU cycles.
 # Requires PCRE version 3.
 ~^[[:alnum:]+/]{60,}$~ OK
 # Put your own body patterns here.
SEE ALSO 
 postmap(1), Postfix lookup table manager
 postconf(5), configuration parameters
 regexp_table(5), format of POSIX regular expression tables
README FILES 
 DATABASE_README, Postfix lookup table overview
AUTHOR(S)
 The PCRE table lookup code was originally written by:
 Andrew McNamara
 andrewm@connect.com.au
 connect.com.au Pty. Ltd.
 Level 3, 213 Miller St
 North Sydney, NSW, Australia
 Adopted and adapted by:
 Wietse Venema
 IBM T.J. Watson Research
 P.O. Box 704
 Yorktown Heights, NY 10598, USA
 Wietse Venema
 Google, Inc.
 111 8th Avenue
 New York, NY 10011, USA
 PCRE_TABLE(5)