[Dxbase] IC-746pro

Fri Jun 13 13:14:27 EDT 2008

Do not set the baud rate to Auto. Pick a hard number speed and set both the 
radio and DXB to that speed.
73,
Gary AL9A
----- Original Message ----- 
From: "JV" <jv at kt4u.org>
To: "Z DX Base" <dxbase at mailman.qth.net>
Sent: June 13, 2008 4:32 AM
Subject: Re: [Dxbase] IC-746pro
>> Hi Greg
> If I can find the problem, I'll post it. I have the baud rate set for
> auto and the address is 66h. Will probably be Monday before I play with 
> this
> problem agn. DXBase is the only program where there is a problem with the
> IC-746p. Also, the IC-7000 and IC-756p work FB.
> JV
>>> -------Original Message------- 
>> From: Greg - N4CC
> Date: 6/13/2008 6:45:12 AM
> To: penrith.comms at gmail.com; JV
> Cc: dxbase at mailman.qth.net
> Subject: Re: [Dxbase] IC-746pro
>> A friend of mine just bought a 746 Pro and he is having trouble
> getting it to respond to DXBase 2007. I downloaded the manual from
> the Icom site and see that the you can set the address by going to
> the set-mode...item 36 sets baud rate and 37 is the address. My
> friend's radio was set to 66h which appears to be what is in the .ini
> file. If you get an answer, I hope you'll post it to the
> reflector... Thanks and 73 de Greg-N4CC
>> At 08:10 AM 6/12/2008, Chris Poulson wrote:
>>Hi,
>>>>Not 100% sure of the exact details but you need to find which
>>address your ICOM is set to in the Menus, then you will need to edit
>>the section in Radios.ini that relates to your radio and change the
>>address to the same as the radio. I don't have an Icom anymore so
>>this is from my poor memory :-)
>>>>>>>>On Mon, 9 Jun 2008 19:03:38 -0400 (Eastern Daylight Time), you wrote:
>>>> > Need a little help. Any one have an IC-746pro running with DXBase2005.
>> >For some reason I can't get the computer to talk with the IC-746pro.
> Radios
>> >ini is installed and I think I have Options/Radio 1 set up for 
>> >IC-746pro.
>>> >Got to be some thing simple that I'm over looking. Maybe in the
> polling???
>> >What are you guys using in Radios.ini or in the setup?
>> >
>> > The interface is working OK with my contest program N1MM Logger.
>>> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net