Ask AI
AskAI
Ask AI

EFM32TM PG26 32-bit Microcontrollers (MCUs)

The EFM32PG26 32-bit microcontroller (MCU) family is a software-compatible, MCU-only version of the EFR32xG26 wireless SoC platform, namely (BG26 and MG26). PG26 32-bit MCUs are ideal for enabling a wide range of low-power and high-performance embedded IoT applications.

The highly efficient PG26 offers an 80 MHz ARM® Cortex®-M33 with LCD controller, rich analog and communication peripherals, low current consumptions, and more GPIOs to address complex systems. The PG26 is also equipped with a hardware AI/ML accelerator allowing for faster inferencing at the edge with lower power consumption.

Up to 3 MB Flash and 512 kB RAM
AI/ML Hardware Accelerator

EFM32PG26 Common Specs

Low-Power System-on-Chip

  • High-performance 32-bit 80 MHz ARM Cortex®-M33 with DSP instruction and floating-point unit for efficient signal processing
  • Up to 3200 kB flash program memory
  • Up to 512 kB RAM data memory
  • Matrix Vector Processor for AI/ML acceleration

Low System Energy Consumption

  • 42.8 μA/MHz in Active Mode (EM0) at 80 MHz
  • 1.4 μA EM2 DeepSleep current (16 kB RAM retention and RTC running from LFRCO)

Wide Operating Range

  • 1.71 to 3.8 V single power supply
  • -40 to +125 °C

Packages

  • QFN48 6 mm x 6 mm x 0.85 mm
  • QFN68 8 mm x 8 mm x 0.85 mm
  • BGA136 7 mm x 7 mm x 0.82 mm

Wide Selection of MCU Peripherals

  • Analog-to-Digital Converter (IADC) with flexible performance
    • 12, 16, 20-bit output
    • Select OPNs support High Speed Mode (up to 2 Msps) and High Accuracy Mode (up to 16 bits ENOB at 3.8 ksps)
  • 2 ×ばつ Analog Comparator (ACMP)
  • 2 x Digital-to-Analog Converter (VDAC)
  • Up to 64 General Purpose I/O pins with output state retention and asynchronous interrupts
  • 8 Channel DMA Controller
  • 20 Channel Peripheral Reflex System (PRS)
  • 6 ×ばつ 16-bit Timer/Counter with 3 Compare/Capture/PWM channels (TIMER2/3/4/5/6/7)
  • 4 ×ばつ 32-bit Timer/Counter with 3 Compare/Capture/PWM channels(TIMER0/1/8/9)
  • 2 x 32-bit Real Time Counter (SYSRTC/BURTC)
  • 24-bit Low-Energy Timer for waveform generation (LETIMER)
  • 16-bit Pulse Counter with asynchronous operation (PCNT)
  • 2 ×ばつ Watchdog Timer (WDOG)
  • 3 x Universal Synchronous/Asynchronous Receiver/Transmitter (USART), supporting UART/SPI/SmartCard (ISO 7816)/IrDA/I2S
  • 4 ×ばつ Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART) supporting UART/SPI/DALI/IrDA
  • 4 ×ばつ I2C interface with SMBus support
  • Low-frequency RC Oscillator with precision mode to replace 32 kHz sleep crystal (LFRCO)
  • Integrated Low-Energy LCD Controller supporting up to 4 x 40 segments (LCD)
  • Keypad scanner supporting up to 6 x 8 matrix (KEYSCAN)
  • Die temperature sensor with ± 1.5 °C accuracy after single-point calibration

Secure VaultTM

Find the Right EFM32PG26 Device Select Columns

Select Columns
Part Number Pricing MHz Flash RAM Dig I/O Pins Security ADC 1 USB Temp Sensor UART RTC Package Type Package Sixe (mm) Internal Osc. Debug Interface Cryptography
1K @ US2ドル.64 AES-128 AES-256 ECC SHA-1 SHA-2
1K @ US2ドル.61 AES-128 AES-256 ECC SHA-1 SHA-2
1K @ US2ドル.93 AES-128 AES-256 ECC SHA-1 SHA-2
1K @ US2ドル.88 AES-128 AES-256 ECC SHA-1 SHA-2
1K @ US3ドル.35 AES-128 AES-256 ECC SHA-1 SHA-2
1K @ US3ドル.28 AES-128 AES-256 ECC SHA-1 SHA-2
1K @ US4ドル.47 AES-128 AES-256 ECC SHA-1 SHA-2
1K @ US4ドル.35 AES-128 AES-256 ECC SHA-1 SHA-2
1K @ US4ドル.41 AES-128 AES-256 ECC SHA-1 SHA-2
1K @ US4ドル.28 AES-128 AES-256 ECC SHA-1 SHA-2
1K @ US4ドル.16 AES-128 AES-256 ECC SHA-1 SHA-2
1K @ US4ドル.23 AES-128 AES-256 ECC SHA-1 SHA-2

Sort A -> Z
Sort Z -> A

Filter by values...
.

EFM32PG26 Explorer Kit

The PG26-EK2711A Explorer Kit, PG26 Explorer Kit, is a small development tool based on the EFM32PG26 MCU. It enables concept creation of loT applications.

EFM32PG26 Explorer Kit

The PG26-EK2711A Explorer Kit, PG26 Explorer Kit, is a small development tool based on the EFM32PG26 MCU. It enables concept creation of loT applications.
MSRP 31ドル.00

EFM32PG26 Pro Kit

The PG26 Pro Kit is an ideal starting point for application development on the EFM32PG26 Microcontrollers. The board features sensors and peripherals, demonstrating some of the many capabilities of the EFM32PG26 Microcontroller. Additionally, the board is a fully featured debugger and energy monitoring tool that can be used with external applications.

EFM32PG26 Pro Kit

The PG26 Pro Kit is an ideal starting point for application development on the EFM32PG26 Microcontrollers. The board features sensors and peripherals, demonstrating some of the many capabilities of the EFM32PG26 Microcontroller. Additionally, the board is a fully featured debugger and energy monitoring tool that can be used with external applications.
MSRP 99ドル.00

Simplicity Link Debugger

The Simplicity Link Debugger is a tool designed to debug and program our 32-bit and 8-bit devices on custom boards. The J-Link debugger enables programming and debugging on the target device over USB, through our Mini Simplicity interface.

Simplicity Link Debugger

The Simplicity Link Debugger is a tool designed to debug and program our 32-bit and 8-bit devices on custom boards. The J-Link debugger enables programming and debugging on the target device over USB, through our Mini Simplicity interface.
MSRP 35ドル.00

Your File Will Start Downloading Shortly

Thank you for downloading .

If you have any issues downloading, please contact sales support or product technical support.

Close
Loading Results
Close

AltStyle によって変換されたページ (->オリジナル) /