Design a logic circuit with three inputs A, B, C and an output that goes LOW only when A is HIGH while B and C are different. Draw and upload the circuit if you can, or at least describe it in words.

5/ Select a suitable example for combinational logic circuit. A) None of the given choices B) Decoders C) Latches D ) PLA

Describe in a short paragraph the difference between combinational logic circuits and sequential logic circuits.

Consider a family of logic gates that operate under the static discipline with the following voltage thresholds: VI=1.5V, VOL=0.5V, VIH=3.5V, and VOH=4.4V. a. What is the lowest voltage that can be output by an inverter for a logical 1 output? Why? b. What is the highest voltage that must be interpreted by a receiver as logical 0? Why? c. What is the lowest voltage that must be interpreted by a receiver as logical 1? Why?

Design a combinational circuit using multiplexer for a car chime based on thefollowing system: A car chime or bell will sound if the output of the logic circuit(X) is set to a logic ‘1’. The chime is to be sounded for either of the followingconditions:• if the headlights are left on when the engine is turned off and• if the engine is off and the key is in the ignition when the door is opened.Use the following input names and nomenclature in the design process:• ‘E’ – Engine. ‘1’ if the engine is ON and ‘0’ if the engine is OFF• ‘L’ – Lights. ‘1’ if the lights are ON and ‘0’ if the lights are OFF• ‘K’ – Key. ‘1’ if the key is in the ignition and ‘0’ if the key is not in the ignition• ‘D’ – Door. ‘1’ the door is open and ‘0’ if the door is closed• ‘X’ – Output to Chime. ‘1’ is chime is ON and ‘0’ if chime is OFF

Design a 5 bits input logic circuit that can be output F to go active (High) under the following conditions: - All inputs are logic 1" - An odd number of inputs are logic 1" - Non of the inputs are logic 1"

Question 1) If six NOT (inverters) gates are connected in series and the input to the first gate is a LOW (0) the output of the FIFTH. gate will be:

Required information A fan is to run only when all of the following conditions are met: • Input A is OFF. • Input B is ON or input C is ON, or both B and Care ON. Inputs D and E are both ON. . One or more of inputs F, G, or H are ON. Note: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Identify the correct gate logic diagram for the given control system. Multiple Choice K

Draw in Table 3 the circuit schematic of each segment using the basic logic gates in kmap

9 Part 1 of 2 Mc Graw Hill Required information Consider the logic gate circuit shown in the given figure. A (S1)-0- B (S2)-0 C (S3)-0- AB B BC B+C What is the Boolean equation for the given figure? ***************** The Boolean equation for the given figure is (Click to select) Note: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part.

PLease Explain the design process of this thoroughly

What are the values of the inputs a, b, c, d, e, f and g for a Seven-Segment LED that displays the number 2? Assume active high logic. a) 1101101 b) 1010101 c) 1101110 d) None of the above e) All of the above

Question #1 Which logic function does the circuit implement? VHigh Kt VA Vo VB Vc VLOW (i) (A and B) and C (ii) (A or B) and C (iii) A and (B or C) (iv) (A and B) or C (v) A or (B and C) (vi) (A or B) or C