This repo contains all needed material for participation at FPGA 101 Workshop at Hackaday event in Belgrade 26th of May 2018.

You probably already have a favorite text editor on your computer ready, but in case it does not have Verilog language syntax hightlight, that could help you at least at start, install Visual Studio Code or Atom or any similar editor supporting it.

For Visual Studio Code use:

ext install mshr-h.VerilogHDL

For Atom use:

apm install language-verilog

First install required packages.

For Ubuntu use :

sudo apt install python-pip make git gtkwave curl

Also install Node.JS

curl -sL https://deb.nodesource.com/setup_8.x -o nodesource_setup.sh
sudo bash nodesource_setup.sh
sudo apt-get install nodejs

Download prepared package, and install APIO

cd ~
wget https://github.com/mmicko/fpga101-workshop/releases/download/tools/fpga101-linux-x64-tools.tar.gz
tar xvfz fpga101-linux-x64-tools.tar.gz
cd hackaday-fpga101
source fpga101.sh
cd apio
sudo pip install -e .

Install needed Node.JS packages for IceStudio

cd ../icestudio
npm install

Download file from this link first.

Uze 7zip (can be downloaded from here) to unpack file (using right click -> 7-Zip -> Extract here )

Move that folder to root of C drive (mandatory due to location being hardcoded in part of msys install)

Go to c:\msys64 and click ConEmu.exe to get console.

Your profile will be generated and you will be greeted by next prompt.

[HACKADAY] C:\msys64\src>

If you do not already have installed you favorite terminal console for serial access, please install PuTTY or similar. You can even install it from command line by using:

pacman -S mingw-w64-x86_64-putty

First install Homebrew to be able to install rest of packages.

/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

Then you will be able to install Python 3, Node.JS and GTKWave

brew install python
brew install node
brew install wget
brew cask install gtkwave

Download prepared package, and install APIO

cd ~
wget https://github.com/mmicko/fpga101-workshop/releases/download/tools/fpga101-darwin-x64-tools.tar.gz
tar xvfz fpga101-darwin-x64-tools.tar.gz
cd hackaday-fpga101
source fpga101.sh
cd apio
sudo pip3 install -e .

Install needed Node.JS packages for IceStudio

cd ../icestudio
npm install

To be able to test environment and to have starting point for workshop you also need to download this repository.

git clone https://github.com/mmicko/fpga101-workshop

NOTE In case you are getting error on git utility on Windows, first run msys but just leave it open at side, and try again in main window:

c:\msys64\msys2.exe

In examples down listed, assumption is that on Linux and macOS all is downloaded in user home folder, and on Windows in c:\msys64\src folder.

For Linux and macOS always make sure you have tools setup and initialized first.

source ~/hackaday-fpga101/fpga101.sh

To test if all is setup correctly.

cd fpga101-workshop/tests/led
apio build

response should be

[xxx xxx x hh:mm:ss yyyy] Processing fpga101
--------------------------------------------------------------------------------
yosys -p "synth_ice40 -blif hardware.blif" -q led.v
arachne-pnr -d 5k -P sg48 -p pinout.pcf -o hardware.asc -q hardware.blif
icepack hardware.asc hardware.bin
========================= [SUCCESS] Took 1.07 seconds =========================

To check if GTKWave is installed fine use (on macOS it will be as separate application so we will use it manually)

apio sim

And that would open GTKWave with simulation file.

cd ~
cd fpga101-workshop/tests/riscv
make

response should be

riscv64-unknown-elf-gcc -O3 -nostartfiles -mabi=ilp32 -march=rv32ic -Wl,-Bstatic,-T,sections.lds,--strip-debug -ffreestanding -o firmware.elf start.s sections.c firmware.c -lgcc
riscv64-unknown-elf-objcopy -O binary firmware.elf firmware.bin

For Linux and macOS:

cd ~
cd hackaday-fpga101/icestudio
npm start

For Windows:

cd \msys64\opt\icestudio 
npm start

Should start nw.js with IceStudio running.