public class FileCacheImageOutputStream extends ImageOutputStreamImpl
ImageOutputStream that writes its
output to a regular OutputStream. A file is used to
cache data until it is flushed to the output stream.bitOffset, byteOrder, flushedPos, streamPos | Constructor and Description |
|---|
FileCacheImageOutputStream (OutputStream stream,
File cacheDir)
Constructs a
FileCacheImageOutputStream that will write
to a given outputStream. |
| Modifier and Type | Method and Description |
|---|---|
void |
close ()
Closes this
FileCacheImageOutputStream. |
void |
flushBefore (long pos)
Discards the initial portion of the stream prior to the
indicated postion.
|
boolean |
isCached ()
Returns
true since this
ImageOutputStream caches data in order to allow
seeking backwards. |
boolean |
isCachedFile ()
Returns
true since this
ImageOutputStream maintains a file cache. |
boolean |
isCachedMemory ()
Returns
false since this
ImageOutputStream does not maintain a main memory
cache. |
long |
length ()
Returns
-1L to indicate that the stream has unknown
length. |
int |
read ()
Reads a single byte from the stream and returns it as an
int between 0 and 255. |
int |
read (byte[] b,
int off,
int len)
Reads up to
len bytes from the stream, and stores
them into b starting at index off. |
void |
seek (long pos)
Sets the current stream position and resets the bit offset to
0.
|
void |
write (byte[] b,
int off,
int len)
Writes a sequence of bytes to the stream at the current
position.
|
void |
write (int b)
Writes a single byte to the stream at the current position.
|
flushBits, write, writeBit, writeBits, writeBoolean, writeByte, writeBytes, writeChar, writeChars, writeChars, writeDouble, writeDoubles, writeFloat, writeFloats, writeInt, writeInts, writeLong, writeLongs, writeShort, writeShorts, writeUTF checkClosed, finalize, flush, getBitOffset, getByteOrder, getFlushedPosition, getStreamPosition, mark, read, readBit, readBits, readBoolean, readByte, readBytes, readChar, readDouble, readFloat, readFully, readFully, readFully, readFully, readFully, readFully, readFully, readFully, readInt, readLine, readLong, readShort, readUnsignedByte, readUnsignedInt, readUnsignedShort, readUTF, reset, setBitOffset, setByteOrder, skipBytes, skipBytes clone, equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait flush, getBitOffset, getByteOrder, getFlushedPosition, getStreamPosition, mark, read, readBit, readBits, readBoolean, readByte, readBytes, readChar, readDouble, readFloat, readFully, readFully, readFully, readFully, readFully, readFully, readFully, readFully, readInt, readLine, readLong, readShort, readUnsignedByte, readUnsignedInt, readUnsignedShort, readUTF, reset, setBitOffset, setByteOrder, skipBytes, skipBytes public FileCacheImageOutputStream(OutputStream stream, File cacheDir) throws IOException
FileCacheImageOutputStream that will write
to a given outputStream.
A temporary file is used as a cache. If
cacheDiris non-null and is a
directory, the file will be created there. If it is
null, the system-dependent default temporary-file
directory will be used (see the documentation for
File.createTempFile for details).
stream - an OutputStream to write to.cacheDir - a File indicating where the
cache file should be created, or null to use the
system directory.IllegalArgumentException - if stream
is null.IllegalArgumentException - if cacheDir is
non-null but is not a directory.IOException - if a cache file cannot be created.public int read() throws IOException
ImageInputStreamImpl int between 0 and 255. If EOF is reached,
-1 is returned.
Subclasses must provide an implementation for this method. The subclass implementation should update the stream position before exiting.
The bit offset within the stream must be reset to zero before the read occurs.
read in interface ImageInputStream read in class ImageInputStreamImpl -1
if EOF is reached.IOException - if the stream has been closed.public int read(byte[] b, int off, int len) throws IOException
ImageInputStreamImpl len bytes from the stream, and stores
them into b starting at index off.
If no bytes can be read because the end of the stream has been
reached, -1 is returned.
The bit offset within the stream must be reset to zero before the read occurs.
Subclasses must provide an implementation for this method. The subclass implementation should update the stream position before exiting.
read in interface ImageInputStream read in class ImageInputStreamImpl b - an array of bytes to be written to.off - the starting position within b to write to.len - the maximum number of bytes to read.-1
to indicate EOF.IOException - if an I/O error occurs.public void write(int b) throws IOException
ImageOutputStream b are ignored.
If the bit offset within the stream is non-zero, the
remainder of the current byte is padded with 0s
and written out first. The bit offset will be 0 after the
write. Implementers can use the
flushBitsImageOutputStreamImpl
write in interface DataOutput write in interface ImageOutputStream write in class ImageOutputStreamImpl b - an int whose lower 8 bits are to be
written.IOException - if an I/O error occurs.public void write(byte[] b, int off, int len) throws IOException
ImageOutputStream len is 0, nothing is written.
The byte b[off] is written first, then the byte
b[off + 1], and so on.
If the bit offset within the stream is non-zero, the
remainder of the current byte is padded with 0s
and written out first. The bit offset will be 0 after the
write. Implementers can use the
flushBitsImageOutputStreamImpl
write in interface DataOutput write in interface ImageOutputStream write in class ImageOutputStreamImpl b - an array of bytes to be written.off - the start offset in the data.len - the number of bytes to write.IOException - if an I/O error occurs.public long length()
ImageInputStreamImpl -1L to indicate that the stream has unknown
length. Subclasses must override this method to provide actual
length information.length in interface ImageInputStream length in class ImageInputStreamImpl public void seek(long pos) throws IOException
EOFException will be thrown only if a read is
performed. The file length will not be increased until a write
is performed.seek in interface ImageInputStream seek in class ImageInputStreamImpl pos - a long containing the desired file
pointer position.IndexOutOfBoundsException - if pos is smaller
than the flushed position.IOException - if any other I/O error occurs.public boolean isCached()
true since this
ImageOutputStream caches data in order to allow
seeking backwards.isCached in interface ImageInputStream isCached in class ImageInputStreamImpl true.isCachedMemory(),
isCachedFile() public boolean isCachedFile()
true since this
ImageOutputStream maintains a file cache.isCachedFile in interface ImageInputStream isCachedFile in class ImageInputStreamImpl true.isCached(),
isCachedMemory() public boolean isCachedMemory()
false since this
ImageOutputStream does not maintain a main memory
cache.isCachedMemory in interface ImageInputStream isCachedMemory in class ImageInputStreamImpl false.isCached(),
isCachedFile() public void close() throws IOException
FileCacheImageOutputStream. All
pending data is flushed to the output, and the cache file
is closed and removed. The destination OutputStream
is not closed.close in interface Closeable close in interface AutoCloseable close in interface ImageInputStream close in class ImageInputStreamImpl IOException - if an error occurs.public void flushBefore(long pos) throws IOException
ImageInputStream IndexOutOfBoundsException.
Calling flushBefore may allow classes
implementing this interface to free up resources such as memory
or disk space that are being used to store data from the
stream.
flushBefore in interface ImageInputStream flushBefore in interface ImageOutputStream flushBefore in class ImageInputStreamImpl pos - a long containing the length of the
stream prefix that may be flushed.IOException - if an I/O error occurs. Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2020, Oracle and/or its affiliates. All rights reserved. Use is subject to license terms. Also see the documentation redistribution policy.
Scripting on this page tracks web page traffic, but does not change the content in any way.