Hostile Divisor Numbers

Question

Some divisors of positive integers really hate each other and they don't like to share one or more common digits.

Those integers are called Hostile Divisor Numbers (HDN)

Examples

Number 9566 has 4 divisors: 1, 2, 4783 and 9566
(as you can see, no two of them share the same digit).
Thus, 9566 is a Hostile Divisor Number

Number 9567 is NOT HDN because its divisors (1, 3, 9, 1063, 3189, 9567) share some common digits.

Here are the first few HDN

1,2,3,4,5,6,7,8,9,23,27,29,37,43,47,49,53,59,67,73,79,83,86,87,89,97,223,227,229,233,239,257,263,267,269,277,283,293,307,337... 

Task

The above list goes on and your task is to find the nth HDN

Input

A positive integer n from 1 to 4000

Output

The nth HDN

Test Cases

here are some 1-indexed test cases.
Please state which indexing system you use in your answer to avoid confusion.

input -> output 
 1 1 
 10 23 
 101 853 
 1012 26053 
 3098 66686 
 4000 85009 

This is code-golf, so the lowest score in bytes wins.

EDIT

Good news! I submitted my sequence to OEIS and...
Hostile Divisor Numbers are now OEIS A307636

• 000: I think square numbers would be the least hostile of numbers.
• Jeppe Stig Nielsen: @JoeFrambach That I do not understand. There are perfect-square HDN. For a somewhat large example, 94699599289, the square of 307733, has divisors [1, 307733, 94699599289] which shows it is a HDN. Seems hostile to me.
• Darrel Hoffman: @JeppeStigNielsen For a much smaller example, why not just 49? Factors [1, 7, 49] qualifies as hostile... Or, well, 4: [1, 2, 4]...
• Jeppe Stig Nielsen: @DarrelHoffman Not to mention, the square number 1 with divisor list [1]. (Maybe large HDN are more interesting?)
• 000: I interpreted 49 as having divisors [7, 7], which not only share digits but are the same digits. 49 has factors [1, 7, 49]

Answer 1

05AB1E, (削除) 12 (削除ここまで) 10 bytes

μNNÑ€ÙSDÙQ

-2 bytes thanks to @Emigna.

1-indexed

Try it online or verify most test cases (last two test cases are omitted, since they time out).

Explanation:

μ # Loop while the counter_variable is not equal to the (implicit) input yet:
 N # Push the 0-based index of the loop to the stack
 NÑ # Get the divisors of the 0-based index as well
 # i.e. N=9566 → [1,2,4783,9566]
 # i.e. N=9567 → [1,3,9,1063,3189,9567]
 €Ù # Uniquify the digits of each divisor
 # → ["1","2","4783","956"]
 # → ["1","3","9","1063","3189","9567"]
 S # Convert it to a flattened list of digits
 # → ["1","2","4","7","8","3","9","5","6"]
 # → ["1","3","9","1","0","6","3","3","1","8","9","9","5","6","7"]
 D # Duplicate this list
 Ù # Unique the digits
 # → ["1","2","4","7","8","3","9","5","6"]
 # → ["1","3","9","0","6","8","5","7"]
 Q # And check if it is still equal to the duplicated list
 # → 1 (truthy)
 # → 0 (falsey)
 # And if it's truthy: implicitly increase the counter_variable by 1
 # (After the loop: implicitly output the top of the stack,
 # which is the pushed index)

• Emigna: You beat me to it this time. I had µNNÑ€ÙSDÙQ for 10.
• Kevin Cruijssen: @Emigna Ah, I was just working on an alternative with µ, so you save me the trouble. ;)
• don bright: this is poetically eloquent

Answer 2

Python 2, 104 bytes

n=input()
x=1
while n: 
 x=i=x+1;d={0};c=1
 while i:m=set(`i`*(x%i<1));c*=d-m==d;d|=m;i-=1
 n-=c
print x

Try it online!

0-indexed.

Answer 3

JavaScript (ES6), 78 bytes

1-indexed.

n=>eval("for(k=0;n;n-=!d)for(s=d=++k+'';k%--d||d*!s.match(`[${s+=d,d}]`););k")

Try it online!

Faster version, 79 bytes

n=>{for(k=0;n;n-=!d)for(s=d=++k+'';k%--d||d*!s.match(`[${s+=d,d}]`););return k}

Try it online!

How?

Given an integer \$k>0\$, we build the string \$s\$ as the concatenation of all divisors of \$k\$.

Because \$k\$ is always a divisor of itself, \$s\$ is initialized to \$k\$ (coerced to a string) and the first divisor that we try is \$d=k-1\$.

For each divisor \$d\$ of \$k\$, we test whether any digit of \$d\$ can be found in \$s\$ by turning \$d\$ into a character set in a regular expression.

Examples

• \$s=\text{"}956647832\text{"}\$, \$d=1\$ → "956647832".match(/[1]/) is falsy
• \$s=\text{"}9567\text{"}\$, \$d=3189\$ → "9567".match(/[3189]/) is truthy

Commented

This is the version without eval(), for readability

n => { // n = input
 for( // for() loop:
 k = 0; // start with k = 0
 n; // go on until n = 0
 n -= !d // decrement n if the last iteration resulted in d = 0
 ) //
 for( // for() loop:
 s = // start by incrementing k and
 d = ++k + ''; // setting both s and d to k, coerced to a string
 k % --d || // decrement d; always go on if d is not a divisor of k
 d * // stop if d = 0
 !s.match( // stop if any digit of d can be found in s
 `[${s += d, d}]` // append d to s
 ); //
 ); // implicit end of inner for() loop
 // implicit end of outer for() loop
 return k // return k
} //

Answer 4

Jelly, 10 bytes

ÆDQ€FQƑμ#Ṫ

Try it online!

-1 byte thanks to ErikTheOutgolfer

Takes input from STDIN, which is unusual for Jelly but normal where nfind is used.

ÆDQ€FQƑμ#Ṫ Main link
 Ṫ Get the last element of
 # The first <input> elements that pass the filter:
ÆD Get the divisors
 Q€ Uniquify each (implicitly converts a number to its digits)
 F Flatten the list
 QƑ Does that list equal itself when deduplicated?

2-indexed

• ZaMoC: is this 2-indexed? It's ok with me but please state it for others
• hyperneutrino: It's whatever your test cases were, so 1
• ZaMoC: No it isn't. 101 returns 839. and 102 -> 853. It works fine but it is 2-indexed
• hyperneutrino: @J42161217 wait what? i guess when i moved the nfind it changed the indexing lol
• Erik the Outgolfer: =Q$ is the same as QƑ.

Answer 5

Perl 6, 53 bytes

{(grep {/(.).*0ドル/R!~~[~] grep $_%%*,1..$_},^∞)[$_]}

Try it online!

1-indexed.

/(.).*0ドル/ matches any number with a repeated digit.

grep $_ %% *, 1 .. $_ returns a list of all divisors of the number $_ currently being checked for membership in the list.

[~] concatenates all of those digits together, and then R!~~ matches the string on the right against the pattern on the left. (~~ is the usual match operator, !~~ is the negation of that operator, and R is a metaoperator that swaps the arguments of !~~.)

• Jo King: 50 bytes
• Jo King: Ah wait, this checks for digits within the same divisor. The regex should be /(\d).*\s.*0ドル/, where you don't concatenate the divisors

Answer 6

Python 2 (PyPy), (削除) 117 (削除ここまで) 114 bytes

Uses 1-indexing

k=input();n=0;r=range
while k:n+=1;k-=1-any(set(`a`)&set(`b`)for a in r(1,n+1)for b in r(1,a)if n%a<1>n%b)
print n

Try it online!

Answer 7

Wolfram Language 103 bytes

Uses 1-indexing. I'm surprised it required so much code.

(k=1;u=Union;n=2;l=Length;While[k<#,If[l[a=Join@@u/@IntegerDigits@Divisors@#]==l@u@a&@n,k++];n++];n-1)&

• ZaMoC: Can you please add a TIO link so that everybody can check your answer?
• ZaMoC: 95 bytes: (n=t=1;While[t<=#,If[!Or@@IntersectingQ@@@Subsets[IntegerDigits@Divisors@n,{2}],t++];n++];n-1)& I am not planning to post an answer so I will leave this here
• DavidC: @J42161217, I've been trying to get the code to work in TIO without success. There must be some trick I'm missing.
• DavidC: @J42161217, Your code seems to work but takes 3 times the runtime. You can submit it as your own. (Maybe I'll learn how to implement TIO from your example.)
• att: 72 bytes using For instead of While, E!=##& to test for repeated digits

Answer 8

PowerShell, 112 bytes

for($a=$args[0];$a-gt0){$z=,0*10;1..++$n|?{!($n%$_)}|%{"$_"|% t*y|sort -u|%{$z[+"$_"]++}};$a-=!($z|?{$_-ge2})}$n

Try it online!

Takes 1-indexed input $args[0], stores that into $a, loops until that hits 0. Each iteration, we zero-out a ten-element array $z (used to hold our digit counts). Then we construct our list of divisors with 1..++$n|?{!($n%$_)}. For each divisor, we cast it to a string "$_", cast it toCharArray, and sort those digits with the -unique flag (because we don't care if a divisor itself has duplicate digits). We then increment the appropriate digit count in $z. Then, we decrement $a only if $z contains 0s and 1s (i.e., we've found an HDN). If we've finished our for loop, that means we found the appropriate number of HDNs, so we leave $n on the pipeline and output is implicit.

• mazzy: you could save some bytes: $a-=!($z-ge2) instead $a-=!($z|?{$_-ge2})
• mazzy: a bit golfed

Answer 9

Python 3, 115 bytes

1-indexed

f=lambda n,x=1,s="",l="",d=1:n and(d>x+1and f(n-1,x+1)or{*s}&{*l}and f(n,x+1)or f(n,x,s+l,(1-x%d)*str(d),d+1))or~-x

Try it online!

This uses a lot of recursion; even with increased recursion limit, it can't do f(30). I think it might be golfable further, and I tried finding something to replace the (1-x%d) with, but couldn't come up with anything (-~-x%d has the wrong precedence). Any bytes that can be shaved off are greatly appreciated.

How it works

# n: HDNs to go
# x: Currently tested number
# s: String of currently seen divisor digits
# l: String of digits of last tried divisor if it was a divisor, empty string otherwise
# d: Currently tested divisor
f=lambda n,x=1,s="",l="",d=1:n and( # If there are still numbers to go
 d>x+1and f(n-1,x+1)or # If the divisors have been
 # exhausted, a HDN has been found
 {*s}&{*l}and f(n,x+1)or # If there were illegal digits in
 # the last divisor, x isn't a HDN
 f(n,x,s+l,(1-x%d)*str(d),d+1)
 # Else, try the next divisor, and
 # check this divisor's digits (if
 # if is one) in the next call
 )or~-x # Else, return the answer

Answer 10

Wolfram Language (Mathematica), 74 bytes

Nest[1+#//.a_/;!Unequal@@Join@@Union/@IntegerDigits@Divisors@a:>a+1&,0,#]&

Try it online!

Answer 11

Brachylog (v2), 14 bytes

;A{Nfdmc≠&}f(t

Try it online!

Function submission; input from the left, output to the right. (The TIO link contains a command-line argument to run a function as though it were a full program.)

Explanation

"Is this a hostile divisor number?" decision-problem code:

Nfdmc≠
N number is ≥0 (required to match the question's definition of "nth solution")
 f list of all factors of the number
 m for each factor
 d deduplicate its digits
 c concatenate all the deduplications with each other
 ≠ the resulting number has no repeated digits

This turned out basically the same as @UnrelatedString's, although I wrote it independently.

"nth solution to a decision-problem" wrapper:

;A{...&}f(t
 & output the successful input to
 { }f the first n solutions of the problem
 ( taking <n, input> as a pair
;A form a pair of user input and a "no constraints" value
 t take the last solution (of those first n)

This is one of those cases where the wrapper required to produce the nth output is significantly longer than the code required to test each output in turn :-)

I came up with this wrapper independently of @UnrelatedString's. It's the same length and works on the same principle, but somehow ends up being written rather differently. It does have more potential scope for improvement, as we could add constraints on what values we were looking at for free via replacing the A with some constraint variable, but none of the possible constraint variables save bytes. (If there were a "nonnegative integer" constraint variable, you could replace the A with it, and then save a byte via making the the N unnecessary.)

• FrownyFrog: It’s 2-indexed?

Answer 12

Java 10, (削除) 149 (削除ここまで) (削除) 139 (削除ここまで) (削除) 138 (削除ここまで) (削除) 126 (削除ここまで) (削除) 125 (削除ここまで) (削除) 120 (削除ここまで) 119 bytes

n->{int r=0,i,d;for(;n>0;n-=d){var s="1";for(r+=d=i=1;i++<r;)if(r%i<1){d=s.matches(".*["+i+"].*")?0:d;s+=i;}}return r;}

-10 bytes by using .matches instead of .contains per digit, inspired by @Arnauld's JavaScript answer.
-5 bytes thanks to @ValueInk
-1 byte thanks to @ceilingcat

1-indexed

Try it online.

Explanation:

n->{ // Method with integer as both parameter and return-type
 int r=0, // Result-integer, starting at 0
 i, // Index integer
 d; // Decrement integer
 for(;n>0; // Loop until the input `n` is 0:
 n-=d){ // After every iteration: decrease `n` by the decrement integer `d`
 var s="1"; // Create a String `s`, starting at "1"
 for(r+=d=i=1; // (Re)set the decrement and index integers to 1,
 // and increase the result by 1 as well
 i++<r;) // Inner loop `i` in the range [2, r]:
 if(r%i<1){ // If `r` is divisible by `i`:
 d=s.matches(".*["+i+"].*")?
 // If string `s` contains any digits also found in integer `i`:
 0 // Set the decrement integer `d` to 0
 :d; // Else: leave `d` unchanged
 s+=i;}} // And then append `i` to the String `s`
 return r;} // After the loops, return the result `r`

• Value Ink: If you switch the i and s in your regex search, you don't need the extra string conversion, and the result is the same.
• Kevin Cruijssen: @ValueInk Thanks! :)

Answer 13

Brachylog, 16 bytes

g{∧0<.fdmc≠∧}u)t

Try it online!

Very slow, and twice as long as it would be if this was a decision-problem. 1-indexed.

 The output
 t is the last
 u) of a number of unique outputs,
g where that number is the input,
 { } from the predicate declaring that:
 . the output
 < which is greater than
 0 zero
 ∧ (which is not the empty list)
 f factorized
 m with each factor individually
 d having duplicate digits removed
 ≠ has no duplicate digits in
 c the concatenation of the factors
 ∧ (which is not the output).

• kepe: If you just read that explanation as a sentence though...
• Unrelated String: I try to write my explanations like plain English, which typically ends up just making them harder to read

Answer 14

Japt v2.0a0, 17 bytes

_=â ®sâìUμZ¶â}f1

Try it

Port of this Brachylog answer.

Credit: 4 bytes savings total thanks to Shaggy who also suggested there was a better solution leading to many more bytes :)

---

Original answer 28 byte approach:

Èâ¬rÈ«è"[{Y}]" ©X+Y}Xs)«U ́Ãa

Try it

Port of this JavaScript answer.

• Shaggy: 28 bytes
• dana: Nice - I hadn't used the « shortcut before :) I figure if Shaggy is only improving on my score by a handful of bytes, I must be getting (somewhat) decent at this?
• Shaggy: It can be done in 20 (maybe less) b7 employing a slightly different method.
• dana: Hah - I guess I spoke too soon :) yeah, some of the other golfing lang's have much shorter solutions.
• Shaggy: 17 bytes

Answer 15

Perl 5 -p, 66 bytes

map{1while(join$",map{$\%$_==0&&$_}1..++$\)=~/(\d).* .*1円/}1..$_}{

Try it online!

1 indexed

Answer 16

Husk, 10 bytes

!fȯS=uṁdḊN

Try it online!

Same method as Jelly.

Husk, 19 bytes

!f(Λo¬Fnfo¬Eπ2mdḊ)N

Try it online!

The more manual cehcker.

Answer 17

Vyxal, 10 bytes

λKvUfÞu;ȯt

Try it Online!

Answer 18

Icon, 123 bytes

procedure f(n)
k:=m:=0
while m<n do{
k+:=1
r:=0
s:=""
every k%(i:=1 to k)=0&(upto(i,s)&r:=1)|s++:=i
r=0&m+:=1}
return k
end

Try it online!

1-indexed. Really slow for big inputs.

Answer 19

Perl 6, 74 bytes

{(grep {!grep *>1,values [(+)] map *.comb.Set,grep $_%%*,1..$_},1..*)[$_]}

0-indexed. Only the first three cases are listed on TIO since it's too slow to test the rest.

Try it online!

• Jo King: 57 bytes

Answer 20

Ruby, (削除) 110 (削除ここまで) (削除) 97 (削除ここまで) (削除) 92 (削除ここまで) 84 bytes

-13 bytes by leveraging @Arnauld's JavaScript regex check.

-5 bytes for swapping out the times loop for a decrementer and a while.

-8 bytes by ditching combination for something more like the other answers.

->n{x=0;n-=1if(s='';1..x+=1).all?{|a|x%a>0||(e=/[#{a}]/!~s;s+=a.to_s;e)}while n>0;x}

Try it online!

Answer 21

J, ^{(削除) 87 (削除ここまで)} 59 bytes

-28 bytes thanks to FrownFrog

0{(+1,1(-:~.)@;@(~.@":&.>@,i.#~0=i.|])@+{.)@]^:(>{:)^:_&0 0

Try it online!

original

J, 87 bytes

[:{:({.@](>:@[,],([:(-:~.)[:-.&' '@,/~.@":"0)@((]#~0=|~)1+i.)@[#[)}.@])^:(#@]<1+[)^:_&1

Try it online!

Yikes.

This is atrociously long for J, but I'm not seeing great ways to bring it down.

explanation

It helps to introduce a couple helper verbs to see what's happening:

d=.(]#~0=|~)1+i.
h=. [: (-:~.) [: -.&' '@,/ ~.@":"0

• d returns a list of all divisors of its argument
• h tells you such a list is hostile. It stringifies and deduplicates each number ~.@":"0, which returns a square matrix where shorter numbers are padded with spaces. -.&' '@,/ flattens the matrix and removes spaces, and finally (-:~.) tells you if that number has repeats or not.

With those two helpers our overall, ungolfed verb becomes:

[: {: ({.@] (>:@[ , ] , h@d@[ # [) }.@])^:(#@] < 1 + [)^:_&1

Here we maintain a list whose head is our "current candidate" (which starts at 1), and whose tail is all hostile numbers found so far.

We increment the head of the list >:@[ on each iteration, and only append the "current candidate" if it is hostile h@d@[ # [. We keep doing this until our list length reaches 1 + n: ^:(#@] < 1 + [)^:_.

Finally, when we're done, we return the last number of this list [: {: which is the nth hostile number.

• FrownyFrog: 66
• FrownyFrog: 62
• Jonah: This is great, many thanks. Will go over it and update tonight
• FrownyFrog: 59