[LOGic] Logic 8 and Microham Interfaces

Mon Feb 11 15:10:14 EST 2008

Roland... they shouldn't be checked. I am sure that if you uncheck yours 
it will still work.
BTW, is your processor a dual core or single CPU?
Mine is a single CPU... older Pentium 4.
Roland Guidry wrote:
> Stan,
>> I have the exact same setup as you with the Pro 3, but using Microham Keyer
> with USB too. The only difference in your configuration and mine is in
> Logic. I have both DTR and RTS checked under rig control. 
>> Give it a try.
>> Roland NA5Q
>> Message: 7
> Date: 2008年2月11日 11:06:31 -0600
> From: Stan <k9iuq at verizon.net>
> Subject: Re: [LOGic] Logic 8 and Microham Interfaces
> To: LOGic is open to all radio amateurs for discussion of LOGic
> 	logging	program <logic at mailman.qth.net>
> Message-ID: <47B08097.8030203 at verizon.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>> Mel
> Interface= Microham USB II
> Version : USB device Router 5.1.1 - the latest version available at 
> Microham website
> Radio= Icom Pro III, Ci-V baud rate 19200, CI-V address 6Eh, Ci-V 
> transceive On, Ci-V transceive with IC-731 off
>> Microham USB device router Set up:
> Radio Com1, CW Com5 DTR, PTT Com5 RTS, SQL none
>> This setup works flawlessly with over a dozen programs I have tried in 
> the last 2 years.
>> Logic 8 goes into transmit when I load the program. Also goes into 
> transmit when I access and exit the Rig setup menu. Also goes into 
> transmit when I access certain other
> menus like Utilitys. Only way to get it out of transmit is to remove 
> the interface USB plug and re-insert. In Logic 8 I have radio1 setup as 
> Icom all, com1, 19200 2 stop bits Addr 6Eh, DTR and RTS not checked.
>> I dont have the CW keying setup in LOgic right now. Logic sends very 
> poor CW, it stutters and sometimes shortens dits or dahs. I been using 
> Mixw to send CW , since it sends perfectly. Mixw 2 uses the Com 3 port 
> and is not setup for the rig control. I have tried running Logic 8 by 
> itself thinking maybe MIXW was interfering but this is not the case.
>> I have tried other different setups both in Logic and the Device router 
> with same results.
>> Thanks
> Stan K9IUQ
>>> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>