[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
I've used DHCP on my laptop (client part) just by running the netcfg tool, de-activating the eth0 device, choosing DHCP as the boot proto, and re-activating it. as for starting/stoping the dhcp daemon, usign the rc scripts is probably the best method. In redhat, run [as root]: /etc/rc.d/init.d/dhcpd stop /etc/rc.d/init.d/dhcpd start k ------------------------------------------------------------------------------ You can get much further with a kind word and a gun than you can with a kind word alone. -- Al Capone mortis@voicenet.com http://www.voicenet.com/~mortis ------------------------------------------------------------------------------ On 1999年8月30日, Graham, John wrote: > Over the weekend I was able to get DHCP up and running on my RH6 box. It > was a short and sweet setup, but I couldn't figure out how to initialize the > daemons and changes I made without rebooting my box. The documentation I > used stated that doing 'ps -ax | grep dhcpd' would kill the daemon and > 'dhcpd' would start it up again. I changed my range of IP address and tried > this quite a few times before I ended up reboting. Could someone tell me > what I did wrong? > > _______________________________________________ > Plug maillist - Plug@lists.nothinbut.net > http://lists.nothinbut.net/mail/listinfo/plug > _______________________________________________ Plug maillist - Plug@lists.nothinbut.net http://lists.nothinbut.net/mail/listinfo/plug