Thursday, February 12, 2009
SNMP - sending traps to specific hosts
This was an issue I ran into awhile ago. I was trying to send BGP traps to one host, and PIM traps to another. As you can see below, BGP traps were getting sent to both hosts when I used version 1.
When I had version 2c specified, traps were only sent to the host configured for BGP. I do not know if this is difference in the protocol, but it is something you may want to be aware of if you need to send traps to different hosts.
Version 1, traps get sent to both hosts:
When I had version 2c specified, traps were only sent to the host configured for BGP. I do not know if this is difference in the protocol, but it is something you may want to be aware of if you need to send traps to different hosts.
Version 1, traps get sent to both hosts:
R1#sho run | inc snmpVersion 2c, traps get sent to one as desired:snmp-server enable traps bgpsnmp-server enable traps pimsnmp-server host 2.2.2.2 public bgpsnmp-server host 3.3.3.3 public pim
R1#clear ip bgp *
R1#
00:11:49: %BGP-5-ADJCHANGE: neighbor 172.12.14.4 Down User reset
00:11:49: SNMP: Queuing packet to 2.2.2.2
00:11:49: SNMP: V1 Trap, ent bgp, addr 172.12.12.1, gentrap 6, spectrap 2
bgpPeerEntry.14.172.12.14.4 = 00 00
bgpPeerEntry.2.172.12.14.4 = 1
00:11:49: SNMP: Queuing packet to 3.3.3.3
00:11:49: SNMP: V1 Trap, ent bgp, addr 172.12.13.1, gentrap 6, spectrap 2
bgpPeerEntry.14.172.12.14.4 = 00 00
bgpPeerEntry.2.172.12.14.4 = 1
00:11:49: SNMP: Packet sent via UDP to 2.2.2.2
00:11:49: SNMP: Packet sent via UDP to 3.3.3.3
R1#sho run | inc snmpsnmp-server enable traps bgpsnmp-server enable traps pim
snmp-server host 2.2.2.2 version 2c public bgp
snmp-server host 3.3.3.3 version 2c public pim
R1#clear ip bgp *
R1#
00:13:09: %BGP-5-ADJCHANGE: neighbor 172.12.14.4 Down User reset
R1#
00:13:09: SNMP: Queuing packet to 2.2.2.2
00:13:09: SNMP: V2 Trap, reqid 21, errstat 0, erridx 0
sysUpTime.0 = 78967
snmpTrapOID.0 = bgpTraps.2
bgpPeerEntry.14.172.12.14.4 = 00 00
bgpPeerEntry.2.172.12.14.4 = 1
00:13:09: SNMP: Packet sent via UDP to 2.2.2.2
R1#
Labels:
network management,
snmp
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.
[フレーム]