(PHP 4, PHP 5, PHP 7, PHP 8)
array_merge — Сливает элементы массивов
Функция возвращает массив — результат слияния элементов исходного и остальных массивов. По мере слияния значения очередного массива добавляются в конец предыдущего.
При совпадении строковых ключей значение очередного массива перезапишет значение предыдущего с тем же ключом, а при совпадении числовых ключей очередное значение не перезаписывает предыдущее, а добавляется в конец массива.
В итоговом массиве индексация элементов с исходными числовыми ключами начинается с нуля.
arraysСписок массивов для слияния.
Функция возвращает результат слияния элементов входных массивов; при вызове без аргументов возвращается пустой массив (array ).
| Версия | Описание |
|---|---|
| 7.4.0 | Функция теперь поддерживает вызов без аргументов; раньше требовался хотя бы один аргумент. |
Пример #1 Пример обработки значений со строковыми и целочисленными ключами при слиянии массивов функцией array_merge()
<?php
$array1 = ["color" => "red", 2, 4];
$array2 = ["a", "b", "color" => "green", "shape" => "trapezoid", 4];
$result = array_merge($array1, $array2);
print_r($result);Результат выполнения приведённого примера:
Array ( [color] => green [0] => 2 [1] => 4 [2] => a [3] => b [shape] => trapezoid [4] => 4 )
Пример #2 Базовый пример слияния массивов функцией array_merge()
<?php
$array1 = [];
$array2 = [1 => "data"];
$result = array_merge($array1, $array2);
print_r($result);Помните: функция перенумерует числовые ключи!
Array ( [0] => data )
При сложении массивов оператором +
из второго массива в первый добавляются только элементы с новыми ключами;
при совпадении ключей элементы первого массива не перезаписываются.
Числовые ключи итогового массива не переиндексируются.
<?php
$array1 = [0 => 'zero_a', 2 => 'two_a', 3 => 'three_a'];
$array2 = [1 => 'one_b', 3 => 'three_b', 4 => 'four_b'];
$result = $array1 + $array2;
var_dump($result);Ключи первого массива сохранятся. Из второго массива в первый добавятся только элементы с новыми ключами.
array(5) {
[0]=>
string(6) "zero_a"
[2]=>
string(5) "two_a"
[3]=>
string(7) "three_a"
[1]=>
string(5) "one_b"
[4]=>
string(6) "four_b"
}
In some situations, the union operator ( + ) might be more useful to you than array_merge. The array_merge function does not preserve numeric key values. If you need to preserve the numeric keys, then using + will do that.
ie:
<?php
$array1[0] = "zero";
$array1[1] = "one";
$array2[1] = "one";
$array2[2] = "two";
$array2[3] = "three";
$array3 = $array1 + $array2;
//This will result in::
$array3 = array(0=>"zero", 1=>"one", 2=>"two", 3=>"three");
?>
Note the implicit "array_unique" that gets applied as well. In some situations where your numeric keys matter, this behaviour could be useful, and better than array_merge.
--JulianI wished to point out that while other comments state that the spread operator should be faster than array_merge, I have actually found the opposite to be true for normal arrays. This is the case in both PHP 7.4 as well as PHP 8.0. The difference should be negligible for most applications, but I wanted to point this out for accuracy.
Below is the code used to test, along with the results:
<?php
$before = microtime(true);
for ($i=0 ; $i<10000000 ; $i++) {
$array1 = ['apple','orange','banana'];
$array2 = ['carrot','lettuce','broccoli'];
$array1 = [...$array1,...$array2];
}
$after = microtime(true);
echo ($after-$before) . " sec for spread\n";
$before = microtime(true);
for ($i=0 ; $i<10000000 ; $i++) {
$array1 = ['apple','orange','banana'];
$array2 = ['carrot','lettuce','broccoli'];
$array1 = array_merge($array1,$array2);
}
$after = microtime(true);
echo ($after-$before) . " sec for array_merge\n";
?>
PHP 7.4:
1.2135608196259 sec for spread
1.1402177810669 sec for array_merge
PHP 8.0:
1.1952061653137 sec for spread
1.099925994873 sec for array_mergeIn addition to the text and Julian Egelstaffs comment regarding to keep the keys preserved with the + operator:
When they say "input arrays with numeric keys will be renumbered" they MEAN it. If you think you are smart and put your numbered keys into strings, this won't help. Strings which contain an integer will also be renumbered! I fell into this trap while merging two arrays with book ISBNs as keys. So let's have this example:
<?php
$test1['24'] = 'Mary';
$test1['17'] = 'John';
$test2['67'] = 'Phil';
$test2['33'] = 'Brandon';
$result1 = array_merge($test1, $test2);
var_dump($result1);
$result2 = [...$test1, ...$test2]; // mentioned by fsb
var_dump($result2);
?>
You will get both:
array(4) {
[0]=>
string(4) "Mary"
[1]=>
string(4) "John"
[2]=>
string(4) "Phil"
[3]=>
string(7) "Brandon"
}
Use the + operator or array_replace, this will preserve - somewhat - the keys:
<?php
$result1 = array_replace($test1, $test2);
var_dump($result1);
$result2 = $test1 + $test2;
var_dump($result2);
?>
You will get both:
array(4) {
[24]=>
string(4) "Mary"
[17]=>
string(4) "John"
[67]=>
string(4) "Phil"
[33]=>
string(7) "Brandon"
}
The keys will keep the same, the order will keep the same, but with a little caveat: The keys will be converted to integers.We no longer need array_merge() as of PHP 7.4.
[...$a, ...$b]
does the same as
array_merge($a, $b)
and can be faster too.
https://wiki.php.net/rfc/spread_operator_for_array#advantages_over_array_merge