(PHP 4 >= 4.2.0, PHP 5, PHP 7, PHP 8)
array_chunk — Splittet ein Array in Teile auf
array_chunk() teilt das Array in Arrays mit
length Elementen auf. Das letzte Array kann weniger
als length Werte enthalten.
Gibt ein mehrdimensionales Array zurück, das beginnend mit Null
jeweils length Elemente enthält.
Wenn length kleiner ist als 1,
wird ein ValueError ausgelöst.
| Version | Beschreibung |
|---|---|
| 8.0.0 |
Wenn length kleiner ist als 1,
wird nun ein ValueError ausgelöst;
vorher wurde ein Fehler der Stufe E_WARNING
ausgelöst, und die Funktion gab null zurück.
|
Beispiel #1 array_chunk()-Beispiel
<?php
$input_array = array('a', 'b', 'c', 'd', 'e');
print_r(array_chunk($input_array, 2));
print_r(array_chunk($input_array, 2, true));
?>Das oben gezeigte Beispiel erzeugt folgende Ausgabe:
Array ( [0] => Array ( [0] => a [1] => b ) [1] => Array ( [0] => c [1] => d ) [2] => Array ( [0] => e ) ) Array ( [0] => Array ( [0] => a [1] => b ) [1] => Array ( [2] => c [3] => d ) [2] => Array ( [4] => e ) )
Tried to use an example below (#56022) for array_chunk_fixed that would "partition" or divide an array into a desired number of split lists -- a useful procedure for "chunking" up objects or text items into columns, or partitioning any type of data resource. However, there seems to be a flaw with array_chunk_fixed — for instance, try it with a nine item list and with four partitions. It results in 3 entries with 3 items, then a blank array.
So, here is the output of my own dabbling on the matter:
<?php
function partition( $list, $p ) {
$listlen = count( $list );
$partlen = floor( $listlen / $p );
$partrem = $listlen % $p;
$partition = array();
$mark = 0;
for ($px = 0; $px < $p; $px++) {
$incr = ($px < $partrem) ? $partlen + 1 : $partlen;
$partition[$px] = array_slice( $list, $mark, $incr );
$mark += $incr;
}
return $partition;
}
$citylist = array( "Black Canyon City", "Chandler", "Flagstaff", "Gilbert", "Glendale", "Globe", "Mesa", "Miami",
"Phoenix", "Peoria", "Prescott", "Scottsdale", "Sun City", "Surprise", "Tempe", "Tucson", "Wickenburg" );
print_r( partition( $citylist, 3 ) );
?>
Array
(
[0] => Array
(
[0] => Black Canyon City
[1] => Chandler
[2] => Flagstaff
[3] => Gilbert
[4] => Glendale
[5] => Globe
)
[1] => Array
(
[0] => Mesa
[1] => Miami
[2] => Phoenix
[3] => Peoria
[4] => Prescott
[5] => Scottsdale
)
[2] => Array
(
[0] => Sun City
[1] => Surprise
[2] => Tempe
[3] => Tucson
[4] => Wickenburg
)
)To reverse an array_chunk, use array_merge, passing the chunks as a variadic:
<?php
$array = [1, 2, 3, 4, 5, 6, 7, 8, 9];
$chunks = array_chunk($array, 3);
// $chunks = [[1, 2, 3], [4, 5, 6], [7, 8, 9]]
$de_chunked = array_merge(...$chunks);
// $de_chunked = [1, 2, 3, 4, 5, 6, 7, 8, 9]
?>If you just want to grab one chunk from an array, you should use array_slice().Most easy way split array to parts
<?php
$arr = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
print_r(array_chunk($arr, ceil(count($arr) / 2)));
// return: [[1, 2, 3, 4, 5], [6, 7, 8, 9, 10]]
print_r(array_chunk($arr, ceil(count($arr) / 3)));
// return: [[1, 2, 3, 4], [5, 6, 7, 8], [9, 10]]
?>Here my array_chunk_values( ) with values distributed by lines (columns are balanced as much as possible) :
<?php
function array_chunk_vertical($data, $columns) {
$n = count($data) ;
$per_column = floor($n / $columns) ;
$rest = $n % $columns ;
// The map
$per_columns = array( ) ;
for ( $i = 0 ; $i < $columns ; $i++ ) {
$per_columns[$i] = $per_column + ($i < $rest ? 1 : 0) ;
}
$tabular = array( ) ;
foreach ( $per_columns as $rows ) {
for ( $i = 0 ; $i < $rows ; $i++ ) {
$tabular[$i][ ] = array_shift($data) ;
}
}
return $tabular ;
}
header('Content-Type: text/plain') ;
$data = array_chunk_vertical(range(1, 31), 7) ;
foreach ( $data as $row ) {
foreach ( $row as $value ) {
printf('[%2s]', $value) ;
}
echo "\r\n" ;
}
/*
Output :
[ 1][ 6][11][16][20][24][28]
[ 2][ 7][12][17][21][25][29]
[ 3][ 8][13][18][22][26][30]
[ 4][ 9][14][19][23][27][31]
[ 5][10][15]
*/
?>Response to azspot at gmail dot com function partition.
$columns = 3;
$citylist = array('Black Canyon City', 'Chandler', 'Flagstaff', 'Gilbert', 'Glendale', 'Globe', 'Mesa', 'Miami', 'Phoenix', 'Peoria', 'Prescott', 'Scottsdale', 'Sun City', 'Surprise', 'Tempe', 'Tucson', 'Wickenburg');
print_r(array_chunk($citylist, ceil(count($citylist) / $columns)));
Output:
Array
(
[0] => Array
(
[0] => Black Canyon City
[1] => Chandler
[2] => Flagstaff
[3] => Gilbert
[4] => Glendale
[5] => Globe
)
[1] => Array
(
[0] => Mesa
[1] => Miami
[2] => Phoenix
[3] => Peoria
[4] => Prescott
[5] => Scottsdale
)
[2] => Array
(
[0] => Sun City
[1] => Surprise
[2] => Tempe
[3] => Tucson
[4] => Wickenburg
)
)chunk array vertically
$arr = range(1, 19);
function array_chunk_vertical($arr, $percolnum){
$n = count($arr);
$mod = $n % $percolnum;
$cols = floor($n / $percolnum);
$mod ? $cols++ : null ;
$re = array();
for($col = 0; $col < $cols; $col++){
for($row = 0; $row < $percolnum; $row++){
if($arr){
$re[$row][] = array_shift($arr);
}
}
}
return $re;
}
$result = array_chunk_vertical($arr, 6);
foreach($result as $row){
foreach($row as $val){
echo '['.$val.']';
}
echo '<br/>';
}
/*
[1][7][13][19]
[2][8][14]
[3][9][15]
[4][10][16]
[5][11][17]
[6][12][18]
*/Had need to chunk an object which implemented ArrayAccess Iterator Countable. array_chunk wouldn't do it. Should work for any list of things
<?php
$listOfThings = array(1,2,3,4,5,6,7,8,9,10,11,12,13);
print_r(chunk_iterable($listOfThings, 4);
function chunk_iterable($listOfThings, $size) {
$chunk = 0;
$chunks = array_fill(0, ceil(count($listOfThings) / $size) - 1, array());
$index = 0;
foreach($listOfThings as $thing) {
if ($index && $index % $size == 0) $chunk++;
$chunks[$chunk][] = $thing;
$index++;
}
return $chunks;
}
?><table>
<tr>
<?php
$array_chunkdata = array(1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25);
$chunk = array_chunk($array_chunkdata,5);
$rev_counter = 2;
function for_chunk($chunk_data){
echo "<td><table>";
foreach($chunk_data as $key => $chunk_value)
{
echo "<tr><td>";
echo $chunk_value;
echo "</td></tr>";
}
echo "</table></td>";
}
foreach($chunk as $key => $chunk_data)
{
if($rev_counter%2==0)
{
for_chunk($chunk_data);
}
else
{
$chunk_data = array_reverse($chunk_data);
for_chunk($chunk_data);
}
$rev_counter++;
}
?>
</tr>
</table>
/*
Output:
1
2
3
4
5
10
9
8
7
6
11
12
13
14
15
20
19
18
17
16
21
22
23
24
25
*/array_chunk() is helpful when constructing tables with a known number of columns but an unknown number of values, such as a calendar month. Example:
<?php
$values = range(1, 31);
$rows = array_chunk($values, 7);
print "<table>\n";
foreach ($rows as $row) {
print "<tr>\n";
foreach ($row as $value) {
print "<td>" . $value . "</td>\n";
}
print "</tr>\n";
}
print "</table>\n";
?>
Outputs:
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31
The other direction is possible too, with the aid of a function included at the bottom of this note. Changing this line:
$rows = array_chunk($values, 7);
To this:
$rows = array_chunk_vertical($values, 7);
Produces a vertical calendar with seven columns:
1 6 11 16 21 26 31
2 7 12 17 22 27
3 8 13 18 23 28
4 9 14 19 24 29
5 10 15 20 25 30
You can also specify that $size refers to the number of rows, not columns:
$rows = array_chunk_vertical($values, 7, false, false);
Producing this:
1 8 15 22 29
2 9 16 23 30
3 10 17 24 31
4 11 18 25
5 12 19 26
6 13 20 27
7 14 21 28
The function:
<?php
function array_chunk_vertical($input, $size, $preserve_keys = false, $size_is_horizontal = true)
{
$chunks = array();
if ($size_is_horizontal) {
$chunk_count = ceil(count($input) / $size);
} else {
$chunk_count = $size;
}
for ($chunk_index = 0; $chunk_index < $chunk_count; $chunk_index++) {
$chunks[] = array();
}
$chunk_index = 0;
foreach ($input as $key => $value)
{
if ($preserve_keys) {
$chunks[$chunk_index][$key] = $value;
} else {
$chunks[$chunk_index][] = $value;
}
if (++$chunk_index == $chunk_count) {
$chunk_index = 0;
}
}
return $chunks;
}
?>[Editors note: This function was based on a previous function by gphemsley at nospam users dot sourceforge.net]
For those of you that need array_chunk() for PHP < 4.2.0, this function should do the trick:
<?php
if (!function_exists('array_chunk')) {
function array_chunk( $input, $size, $preserve_keys = false) {
@reset( $input );
$i = $j = 0;
while( @list( $key, $value ) = @each( $input ) ) {
if( !( isset( $chunks[$i] ) ) ) {
$chunks[$i] = array();
}
if( count( $chunks[$i] ) < $size ) {
if( $preserve_keys ) {
$chunks[$i][$key] = $value;
$j++;
} else {
$chunks[$i][] = $value;
}
} else {
$i++;
if( $preserve_keys ) {
$chunks[$i][$key] = $value;
$j++;
} else {
$j = 0;
$chunks[$i][$j] = $value;
}
}
}
return $chunks;
}
}
?>This function can be used to reverse effect of <?php array_Chunk()?>.
<?php
function array_Unchunk($array)
{
return call_User_Func_Array('array_Merge',$array);
}
header('Content-Type: text/plain');
$array=array(
array(
'Black Canyon City',
'Chandler',
'Flagstaff',
'Gilbert',
'Glendale',
'Globe',
),
array(
'Mesa',
'Miami',
'Phoenix',
'Peoria',
'Prescott',
'Scottsdale',
),
array(
'Sun City',
'Surprise',
'Tempe',
'Tucson',
'Wickenburg',
),
);
var_Dump(array_Unchunk($array));
?>
Output:
array(17) {
[0]=>
string(17) "Black Canyon City"
[1]=>
string(8) "Chandler"
[2]=>
string(9) "Flagstaff"
[3]=>
string(7) "Gilbert"
[4]=>
string(8) "Glendale"
[5]=>
string(5) "Globe"
[6]=>
string(4) "Mesa"
[7]=>
string(5) "Miami"
[8]=>
string(7) "Phoenix"
[9]=>
string(6) "Peoria"
[10]=>
string(8) "Prescott"
[11]=>
string(10) "Scottsdale"
[12]=>
string(8) "Sun City"
[13]=>
string(8) "Surprise"
[14]=>
string(5) "Tempe"
[15]=>
string(6) "Tucson"
[16]=>
string(10) "Wickenburg"
}Hi, I've made a function to split an array into chunks based on columns wanted. For example:
<?php $a = array(1,2,3,4,5,6,7,8); ?>
goal (say, for 3 columns):
<?php
array(
array(1,2,3),
array(4,5,6),
array(7,8)
);
?>
<?php
function get_array_columns($array, $columns){
$columns_map = array();
for($i=0; $i<$columns; $i++){ $columns_map[] = 0; }//init columns
//create map
$count = count($array);
$position = 0;
while($count > 0){
$columns_map[$position]++;
$position = ($position < $columns-1) ? ++$position : 0;
$count--;
}
//chunk the array based on map
$chunked = array();
foreach($columns_map as $map){
$chunked[] = array_splice($array,0,$map);
}
return $chunked;
}//end get_array_columns
?>With no luck finding a function; here is the one I wrote:
It will evenly distribute items into a fixed amount of groups but also keeps items that were sorted close together to be in the same output groups.
<?php
function distributed_array_chunk(array $items, int $groups, bool $preserveKeys = false) {
$grouped = [];
$groupsPerItem = $groups / count($items);
$progress = 0.00;
foreach ($items as $key => $value) {
$index = floor($progress += $groupsPerItem);
if ($preserveKeys) {
$grouped[$index][$key] = $value;
}
else{
$grouped[$index][] = $value;
}
}
return $grouped;
}
?>This function takes each few elements of an array and averages them together. It then places the averages in a new array. It is used to smooth out data. For example lets say you have a years worth of hit data to a site and you want to graph it by the week. Then use a bucket of 7 and graph the functions output.
function array_bucket($array, $bucket_size) // bucket filter
{
if (!is_array($array)) return false; // no empty arrays
$buckets=array_chunk($array,$bucket_size); // chop up array into bucket size units
foreach ($buckets as $bucket) $new_array[key($buckets])=array_sum($bucket)/count($bucket);
return $new_array; // return new smooth array
}A breakdown by groups with excess:
function array_chunk_greedy($arr, $count){
$arr = array_chunk($arr, $count);
if(($k = count($arr)-1) > 0){
if(count($arr[$k]) < $count){
$arr[$k-1] = array_merge($arr[$k-1], $arr[$k]);
unset($arr[$k]);
}
}
return $arr;
}
$arr = range(1, 13);
$arr = array_chunk_greedy($arr, 4);
print_r($arr);
[1,2,3,4,5,6,7,8,9,10,11,12,13] —> [1,2,3,4] [5,6,7,8] [9,10,11,12,13]
More examples:
[1,2,3,4,5,6,7,8,9,10,11,12] —> [1,2,3,4] [5,6,7,8] [9,10,11,12]
[1,2,3,4,5,6,7,8,9,10,11,12,13] —> [1,2,3,4] [5,6,7,8] [9,10,11,12,13]
[1,2,3,4,5,6,7,8,9,10,11,12,13,14] —> [1,2,3,4] [5,6,7,8] [9,10,11,12,13,14]
[1,2,3,4,5,6,7,8,9,10,11,12,13,14,15] —> [1,2,3,4] [5,6,7,8] [9,10,11,12,13,14,15]
[1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16] —> [1,2,3,4] [5,6,7,8] [9,10,11,12] [13,14,15,16]
Example report:
$arr = range(1, 45);
$arr = array_chunk_lazy($arr, 10);
$arr = array_map(function($sub_value) {
return implode('<br>', $sub_value);
}, $arr);
$title = '<h2>title</h2>';
$arr = $title.implode($title, $arr).$title;
echo $arr;based on the same syntax, useful about making columns :
<?php
function array_chunk_fixed($input, $num, $preserve_keys = FALSE) {
$count = count($input) ;
if($count)
$input = array_chunk($input, ceil($count/$num), $preserve_keys) ;
$input = array_pad($input, $num, array()) ;
return $input ;
}
$array = array(1, 2, 3, 4, 5) ;
print_r(array_chunk($array, 2)) ;
print_r(array_chunk_fixed($array, 2)) ;
?>
---- array_chunk : fixed number of sub-items ----
Array(
[0] => Array(
[0] => 1
[1] => 2
)
[1] => Array(
[0] => 3
[1] => 4
)
[2] => Array(
[0] => 5
)
)
---- array_chunk : fixed number of columns ----
Array(
[0] => Array(
[0] => 1
[1] => 2
[2] => 3
)
[1] => Array(
[0] => 4
[1] => 5
)
)Mistake key did not do what I thought. A patch.
function array_bucket($array,$bucket_size)// bucket filter
{
if (!is_array($array)) return false;
$buckets=array_chunk($array,$bucket_size);// chop up array into bucket size units
$I=0;
foreach ($buckets as $bucket)
{
$new_array[$I++]=array_sum($bucket)/count($bucket);
}
return $new_array;// return new array
}