-
Product ID: 5397
Is your QT Py all alone, lacking a friend to travel the wide world with? When you were a kid you may have learned about the "buddy" system, well this product is kinda like that! A board that will watch your QT Py's back and give it the power and support to wander out past your USB port. This little lipo charger is designed to fit onto the back of any QT Py board, and...
-
Product ID: 6447
The Raspberry Pi 5 is the newest Raspberry Pi computer, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 5 better than the 4? How about a faster processor, USB 3.0 ports, and an updated Gigabit Ethernet chip with PoE capability? Good guess - that's exactly what they did! The Raspberry Pi 5 is the latest product in the...
-
Product ID: 6437
One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block audio connectors so much. No soldering required! Use stranded or solid core wire and a small screwdriver to create custom wiring jigs. This is the 2.5mm (3/32") 4-Pole (TRRS) Audio Plug Terminal Block. TRRS stands for Tip,...
-
Product ID: 6438
One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block audio connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the 2.5mm (3/32") 4-Pole (TRRS) Audio Jack Terminal Block. TRRS stands for...
-
Product ID: 6436
Our favorite food when hacking on code or electronics is a hot bowl of noodles - and around NYC, these are often called 'noods'! What we've got here are flexible LED noodles in different lengths and colors. All are not good for eatin', but they are good for cool lighting effects These are often seen in 'Edison-like' LED bulbs, shaped into hearts or stars, or just...
-
Product ID: 6435
Our favorite food when hacking on code or electronics is a hot bowl of noodles - and around NYC these are often called 'noods'! What we've got here are flexible LED noodles in different lengths and colors. All are not good for eatin' but they are good for cool lighting effects These are often seen in 'Edison-like' LED bulbs, shaped into hearts or stars, or just wound...
-
Product ID: 6441
These use an NTAG chipset, a 'Type 2' tag usable with any smartphone. Unlike "Classic 1K" cards (a.k.a. MiFare S50s), these tags are more secure and work with almost any phone with RFID support, since they avoid the patent issues with MiFare, which require an NXP chipset or a license fee. One of each of our favorite 13.56MHz RFID/NFC NTAG2x3 tags - 5 in total!...
-
Product ID: 5716
ESP32-H2-MINI-1 is a powerful, generic Bluetooth® Low Energy and IEEE 802.15.4 combo module that has a rich set of peripherals. This module is an ideal choice for a wide variety of application scenarios related to Internet of Things (IoT), such as embedded systems, smart home, wearable electronics, etc. At the core of this module is ESP32-H2, a 32-bit RISC-V...
-
Product ID: 6439
Raspberry Pi 500+ is a complete Raspberry Pi 5-based personal computer integrated into a keyboard. Normally, you'd need to pick up a keyboard and other accessories to turn the Pi 5 into a functioning desktop - but since most keyboards have empty space, you can just cram the Pi 5 inside to make an all-in-one kit. Think of it like a modern Apple IIe, but super light...
-
Product ID: 6360
The Smarti Pi Touch Pro 3 is a versatile enclosure designed for the Raspberry Pi Touch Display 2 and is compatible with Raspberry Pi models 3, 4, and 5. It features interchangeable large and small back covers, creating a spacious internal cavity to accommodate HAT boards or custom components. A dedicated space beneath the display also allows for mounting the...
-
Product ID: 6361
The SmartiPi Touch Pro 3 is a versatile enclosure designed for the Raspberry Pi Touch Display 2 and is compatible with Raspberry Pi models 3, 4, and 5. It features interchangeable large and small back covers, creating a spacious internal cavity to accommodate HAT boards or custom components. A dedicated space beneath the display also allows for mounting the Raspberry...
-
Product ID: 6431
*sniff* *sniff* ... do you smell that? No need to stick your nose into a carton of milk anymore, you can build a digital nose with the ENS161 Gas Sensor, a fully integrated MOX gas sensor. This is a very fine air quality sensor from the sensor experts at ScioSense, with I2C interfacing so you don't have to manage the heater and analog reading of a MOX sensor. It...
-
Product ID: 6429
Welcome to ADABOX 022 - shipping Fall/Winter 2025 By purchasing this product you are going to get 1 (one) ADABOX 022 shipped to you! Only subscribers are able to check out, make sure you are logged into your adafruit account, if you're a subscriber and having an issue please contact
[email protected]
-
Product ID: 6433
Here is a cool and minimal enclosure for your MagTag to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate all connection ports of the MagTag. No screws or glue required; simply place the MagTag into the bottom piece, align the button strip on top of the MagTag buttons, place the top half above align and snap 'em...
-
Product ID: 6426
We stock many low cost "Passive IR" Presence / Motion sensors, and they're very popular for detecting motion from humanoids and pets 5 to 20 feet away. (They possibly work on zombies, not guaranteed, depends on how warm they are). The vast majority of PIR sensors use a chunky infrared receiver, a processing chip (sometimes integrated into the receiver) and a lens....
-
Product ID: 4693
ESP32-S2 Saola-1 is a small-sized ESP32-S2 based development board produced by Espressif. Just about all of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S2 Saola-1 on a breadboard - we recommend two breadboards 'side-by-side' since the Saola is a bit wide...
-
Product ID: 6423
Using our muscles to control things is how most of us are accustomed to doing it. We push buttons, pull levers, move joysticks... but what if we could take the buttons, levers, and joysticks out of the equation and control it with our muscles? The MyoWare® 2 Muscle Sensor is an Arduino-compatible, all-in-one electromyography (EMG) sensor from Advancer...
-
Product ID: 6416
Raspberry Pi 500+ puts the power of Raspberry Pi 5’s quad-core 64-bit Arm processor and RP1 I/O controller into an ergonomic and tactile mechanical keyboard, combining uncompromising performance with 16GB RAM and 256GB NVMe storage for a truly premium desktop computer experience. Coming equipped with Gateron KS-33 Blue low-profile switches, which have long...
-
Product ID: 6428
These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They are just mind-bogglingly small - 2mm square. As they are pretty darn tiny, they might be a bit difficult to hand solder. SMT techniques with solder paste and hot air will work best here. These Nano (2mm x 2mm) RGB LEDs are one third...
-
Product ID: 6405
If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we have with JST SH connectors on them for simple digital/analog IO. It has a 1mm pitch JST SH connector on both ends - perfect for 'chaining' boards...
-
Product ID: 6404
If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we have with JST SH connectors on them for simple digital/analog IO. It has a 1mm pitch JST SH connector on both ends - perfect for 'chaining' boards...
-
Product ID: 6406
If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we have with JST SH connectors on them for simple digital/analog IO. It has a 1mm pitch JST SH connector on both ends - perfect for 'chaining' boards...
-
Product ID: 6427
The Raspberry Pi M.2 HAT+ Compact is designed for use with the Raspberry Pi Case for Raspberry Pi 5. The Compact form factor enables you to connect M.2 M key peripherals with the 2230 form factor to Raspberry Pi 5, while allowing space for the case’s integrated cooling fan. Features and warnings Supports single-lane PCIe 2.0 interface (500 MB/s peak transfer...
-
Product ID: 4382
ST takes flight in this Feather board. The new STM32F405 Feather (video) that we designed runs CircuitPython at a blistering 168MHz – our fastest CircuitPython board ever! We put a STEMMA QT / Qwiic port on the end, so you can really easily plug and play I2C sensors. This Feather has lots of goodies: STM32F405 Cortex M4 with FPU and 1MB Flash, 168MHz speed....
-
Product ID: 6412
We accidentally got these cables that were supposed to be assembled into Slim HDMI cables - but obviously are missing the actual connectors. So we're putting them on clearance since they might be useful for some builds that need 19 conductors (4 straight conductors plus 5 sets of 3-wire twisted triplets) The cable is thin (only 4mm diameter), 6 feet (1.8 meters)...
-
Product ID: 6421
For converting digital I2S audio from your ESP32/RP2350 or Raspberry Pi, you'll need a digital-to-analog converter (DAC). The Adafruit PCM5122 I2S DAC is both powerful and easy to use - with excellent audio quality! It's got clean, high-quality, stereo audio and does not need any MCLK signal or I2C configuration. Literally just pipe some I2S audio in, and it will...
-
Product ID: 6420
This pressure sensor from Goertek is a good low-cost sensing solution for measuring barometric pressure. If you need excellent accuracy and repeatability for altitude calculations, you can't beat the Bosch BMP series - but if you are doing basic DIY sensing, this sensor fits the bill. We see it used a lot for DIY quad copter builds and environmental sensing. The...
-
Product ID: 6425
Here is a cool and minimal enclosure for your Fruit Jam to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate all connection ports of the Fruit Jam. No screws or glue required; simply place the Fruit Jam into the bottom piece, insert the slider attachment into the top piece for the power switch, align and snap 'em...
-
Product ID: 6418
Easy e-paper finally comes to Raspberry Pi, with this bonnet that's designed to make it a breeze to add any 'standard' pinout 24-pin flex-connector E-Ink display. This add-on handles all the extra components needed to make E-Paper interfacing easy for Pi and Pi-compatible boards. We even include extras like two user buttons, Stemma QT I2C port, and a 3W I2S speaker...
-
Product ID: 6379
Measuring stretch forces isn't easy - unless you have some conductive rubber cord! This cord is 2mm in diameter and 3 meters long, made of carbon-black impregnated rubber. Usually, this material is used for EMF gasketing, but it's also very fun to play with. In a 'relaxed' state, the resistance is about 350 ohms per inch. As you pull on it, the resistance increases...
-
Product ID: 6375
If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we have with JST SH connectors on them for simple digital/analog IO. It has a 1mm pitch JST SH connector on one end, and 0.1" pitch plug/pin connectors on the...
-
Product ID: 6376
If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we have with JST SH connectors on them for simple digital/analog IO. It has a 1mm pitch JST SH connector on one end, and 0.1" pitch socket connectors on the...
-
Product ID: 6415
E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY their own E-Ink setups, this is a 7.5" diagonal Tri-Color eInk / ePaper Bare Display with 800 x 480 pixels. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic...
-
Product ID: 6414
What's better than our tri-color E-Paper displays? Quad-color, of course! This is a 3.52" 340x180 Quad-Color eInk / ePaper Bare Display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The...
-
Product ID: 6413
Bosch has been a leader in barometric pressure sensors, from the BMP085. BMP180, BMP280, BMP388, BMP390... now we've got the next generation, the Adafruit BMP585 Precision Barometric Pressure and Altimeter Breakout. As you would expect, this sensor is similar to its earlier versions but even better. The BMP585 has better precision than ever, which makes it excellent...
-
Product ID: 6411
Bosch has been a leader in barometric pressure sensors, from the BMP085. BMP180, BMP280, BMP388, BMP390... now we've got the next generation, the Adafruit BMP580 Precision Barometric Pressure and Altimeter Breakout. It can even be used in either I2C and SPI configurations. The BMP580 is the next-generation of sensors from Bosch and is the upgrade to the BMP2xx and...
-
Product ID: 6407
Bosch has been a leader in barometric pressure sensors, from the BMP085. BMP180, BMP280, BMP388, BMP390... now we've got the next generation, the Adafruit BMP58x Precision Barometric Pressure and Altimeter Breakout. As you would expect, this sensor is similar to its earlier versions but even better. The BMP581 has better precision than ever, which makes it excellent...
-
Product ID: 6371
We used a cable like this in a recent build and decided it's perfect for when you want to make a compact USB-C-to-C connection in an enclosure. The metal plugs are durable and easy to grip for plugging and unplugging, while the ribbon cable is flexible and short. Also great for going through slots or fitting through closed drawers/windows/doors. We verified that this...
-
Product ID: 6370
We used a cable like this in a recent build and decided it's perfect for when you want to make a compact USB-C-to-C connection in an enclosure. The metal plugs are durable and easy to grip for plugging and unplugging, while the ribbon cable is flexible and short. Also great for going through slots or fitting through closed drawers/windows/doors. We verified that this...
-
Product ID: 6369
We used a cable like this in a recent build and decided its perfect for when you want to make a compact USB C-to-C connection in an enclosure. The metal plugs are durable and easy to grip for plugging and unplugging while the ribbon cable is flexible and short. Also great for going through slots or fitting through closed drawers/windows/doors. We verified that this...
-
Product ID: 6372
We used a cable like this in a recent build and decided it's perfect for when you want to make a compact USB-C-to-C connection in an enclosure. The metal plugs are durable and easy to grip for plugging and unplugging, while the ribbon cable is flexible and short. Also great for going through slots or fitting through closed drawers/windows/doors. We verified that this...
-
Product ID: 6368
We used a cable like this in a recent build and decided it's perfect for when you want to make a compact USB-C-to-C connection in an enclosure. The metal plugs are durable and easy to grip for plugging and unplugging, while the ribbon cable is flexible and short. Also great for going through slots or fitting through closed drawers/windows/doors. We verified that this...
-
Product ID: 6367
We used a cable like this in a recent build and decided its perfect for when you want to make a compact USB C-to-C connection in an enclosure. The metal plugs are durable and easy to grip for plugging and unplugging while the ribbon cable is flexible and short. Also great for going through slots or fitting through closed drawers/windows/doors. We verified that this...
-
Product ID: 6409
Here is a cute and minimal enclosure for your Adafruit USB Type C CC Resistor Fixer to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate all the peripheries. No screws or glue are required; simply snap the board into the bottom piece and assemble the top piece. It's made of translucent milky white plastic with an...
-
Product ID: 6401
Introducing the TinyS3[D] - The Tiny Mighty ESP32-S3 development board in the TinyPICO format! TinyS3[D] includes an onboard antenna and a u.FL connector for an external antenna on the same board, and you can switch which antenna to use via the RF switch on the fly from inside your code! Two antenna options - one board! The onboard antenna is selected by default, so...
-
Product ID: 6398
Introducing the ProS3[D] - The Ultimate Pro ESP32-S3 Development Board! Two antenna options - one board! ProS3[D] includes an onboard antenna and a u.FL connector for an external antenna on the same board, and you can switch which antenna to use via the RF switch on the fly from inside your code! The onboard antenna is selected by default, so you never need to worry...
-
Product ID: 6399
Introducing the FeatherS3[D] - The pro ESP32-S3 Development Board in the Feather Format! FeatherS3[D] includes an onboard antenna and a u.FL connector for an external antenna on the same board, and you can switch which antenna to use via the RF switch on the fly from inside your code! Two antenna options - one board! The onboard antenna is selected by default, so you...
-
Product ID: 6408
Raspberry Pi Touch Display 2 is the sequel to the popular Raspberry Pi Official Display. It's smaller than the original: a mere 5′′, but has better resolution for a compact touchscreen display for Raspberry Pi. Unlike the original, it has a much higher quality IPS TFT screen, the same kind used on tablets. That means it looks great at any angle, and it...
-
Product ID: 4243
Woah, the cyber-future is here! Flexible E-Ink has been demo'd at high-tech events for years but now you can actually get your paws on it. This display is true E-Ink / E-Paper, once an image is displayed it will stay even once you remove all power. The image is also high contrast and very daylight readable. It really does look just like printed paper! This flexible...
-
Product ID: 6397
E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY their own E-Ink setups, this is a 5.83" Monochrome Black/White EPD - Bare Display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static'...