matplotlib-users Mailing List for matplotlib

Hi,
Sorry for posting to the list, but I had no clue who to address.
Recently I had some troubles sending emails to the list, for they were bounced 
back with this delivery status notification:
The following message to <mat...@li...> was 
undeliverable.
The reason for the problem:
5.1.0 - Unknown address error 550-'Postmaster verification failed while 
checking <prvs=meesters=367...@un...>\n(result of earlier 
verification reused).\nSeveral RFCs state that you are required to have a 
postmaster\nmailbox for each mail domain. This host does not accept 
mail\nfrom domains whose servers reject the postmaster address.\nSender 
verify failed'
What then follows is my entire mail I was going to send.
Unsubscribing / Re-subscribing helped. matplotlib-users is the only list where 
I had such problems, but not the only one using Mailman I'm using.
Could this be a problem with the mailserver I'm using?
My apologies if this is not considered to be of general interest. Please reply 
directly to my address in this case.
TIA
Christian

Hi,
Thanks for all the ideas I got. I'll try them and see what's best / easiest 
for my problem.
Thanks,
Christian
PS Sorry, I accidently send this to Richard only at first ...

Darren Dale wrote:
> On Monday 07 August 2006 08:55, Charlie Moad wrote:
> Pushing a
>> release now for 1.0 might be pointless, since the C-api could possibly
>> change and break compatibility again. After all, it still is a beta.
> I wonder how long we should continue to hold off on a new release. As I said 
> in a previous email, Travis does not foresee changes to the C API before 
> numpy-1.1 (although he doesn't rule them out). Besides, several bug fixes and 
> new features have been added since 0.87.4.
Isn't the "current" version using numpy 0.9.8? No matter, they are ALL 
beta, (or alpha), so there is no reason to stick with any particular one.
1.0b seems to be the least buggy and most future-proof (which, of 
course, doesn't mean that much) at the moment, so I say we do it.
Charlie, can you do OS-X? I still don't have my build environment set up 
quite right, and you beat me to it last time. We'll need to put a new 
numpy mpkg on pythonmac.org at the same time. I'd be glad to do that, if 
it helps, but I need to make sure we use the same version.
-Chris
-- 
Christopher Barker, Ph.D.
Oceanographer
 		
NOAA/OR&R/HAZMAT (206) 526-6959 voice
7600 Sand Point Way NE (206) 526-6329 fax
Seattle, WA 98115 (206) 526-6317 main reception
Chr...@no...

Hi,
i have nearly the same problem. I need to make plots
in which the text, axea and labels are either in
english, frensh, german, spanish or italian. I use
wxPython and in the main-program it woks with the
languages, but the plots have these little squares in
the text if there has to be a umlaut or special
chracter. The unicode demo works as long as the plot
is not embedded in wxPython. With wxPython only
"self.axes.set_ylabel( unicode('Andr\xc3\xa9 was
here!', 'utf-8') )" is working. The other texts have
some weird characters in it. Here is the code to check
yourself:
# -*- coding: utf_8 -*-
from wxPython.wx import *
import gettext
from pylab import *
matplotlib.use('WXAgg')
from matplotlib.backends.backend_wxagg import
FigureCanvasWxAgg as FigureCanvas
from matplotlib.figure import Figure
class GraphFrame(wxFrame):
 def __init__(self, parent, ID, title):
 wxFrame.__init__(self, parent, ID, title,
size=(650,450))
 self.figure = Figure()
 self.axes = self.figure.add_subplot(111)
 self.axes.plot([1,2,4])
 self.axes.set_title( unicode('Développés et
fabriqués', 'latin-1') )
 self.axes.set_xlabel( unicode("réactivité nous
permettent d'être sélectionnés et adoptés", 'latin-1')
)
 self.axes.set_ylabel( unicode('Andr\xc3\xa9
was here!', 'utf-8') )
 self.axes.text( 0.5, 2.5, unicode('Institut
für Festkörperphysik', 'latin-1'), rotation=45)
 self.axes.text( 1, 1.5, u'AVA (check
kerning)') 
 self.canvas = FigureCanvas(self, -1,
self.figure)
 self.sizer = wxBoxSizer(wxVERTICAL)
 self.sizer.Add(self.canvas, 1, wxLEFT | wxTOP
| wxGROW)
 self.SetSizer(self.sizer)
 self.Fit()
 
class MyApp(wxApp):
 def OnInit(self):
 # Install gettext. Once this is done, all
strings enclosed in "_()" will automatically be
translated.
 gettext.install('MyApp', './locale',
unicode=True)
 # detect the user's default language setting
 loc = wxLocale
 userLang = loc.GetSystemLanguage()
 frame = GraphFrame(None, -1, _("Graph Frame"))
 self.SetTopWindow(frame)
 frame.CentreOnScreen()
 frame.Show(True)
 return True
def main():
 app = MyApp(0)
 app.MainLoop()
if __name__ == '__main__':
 main()
The problem is that i do not know all texts to be
shown, as the name of the user should be written as
title.
I am using Windows XP, Python 2.3, wxPython 2.6.1.0
and Matplotlib 0.85
Thanks
 Till Wagner
--- John Hunter <jdh...@ac...>
schrieb:
> >>>>> "marek" == marek <md...@gm...> writes:
> 
> marek> I need to make plots in which the axes
> and text labels
> marek> display in either English, Spanish, or
> Portuguese.
> 
> Does the unicode demo work for you?
> 
>
http://matplotlib.sourceforge.net/examples/unicode_demo.py
> 
> JDH
> 
>
-------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get
> the chance to share your
> opinions on IT & business topics through brief
> surveys -- and earn cash
>
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
>
https://lists.sourceforge.net/lists/listinfo/matplotlib-users
> 
--
"Since man's natural instincts lead him to sin, all men are sinners;
and all sinners go to hell. If everyone goes to hell, then you will
meet all your friends there. Heaven must be populated with some
rather strange creatures if all they lived for was to go to a place
where they can stump harps for eternity."- Anton Szandor LaVey
------------------------------------------------------------------------
Till Wagner <sac...@ya...>
		
___________________________________________________________ 
Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de

On Monday 07 August 2006 08:55, Charlie Moad wrote:
> Here is a link to a build that works with numpy-1.0b1. Pushing a
> release now for 1.0 might be pointless, since the C-api could possibly
> change and break compatibility again. After all, it still is a beta.
I wonder how long we should continue to hold off on a new release. As I said 
in a previous email, Travis does not foresee changes to the C API before 
numpy-1.1 (although he doesn't rule them out). Besides, several bug fixes and 
new features have been added since 0.87.4.
Darren

Here is a link to a build that works with numpy-1.0b1. Pushing a
release now for 1.0 might be pointless, since the C-api could possibly
change and break compatibility again. After all, it still is a beta.
http://euclid.uits.iupui.edu/~cmoad/matplotlib-0.87.4_r2645-py2.4-win32.egg
On 8/7/06, izak marais <iza...@ya...> wrote:
> Does anyone know when the matplotlib install will be able to work with
> numpy1.0? numpy0.9.8 has a memory leak that crashes my program :(.
>
> thanks!
>
>
> ________________________________
> Yahoo! Music Unlimited - Access over 1 million songs. Try it free.
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys -- and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>
>

Hi,
using matplotlib-0.87.4
uname -a == "SunOS maples 5.9 Generic_112233-07 sun4u sparc
SUNW,Sun-Fire-280R"
gcc --version == "2.95.3" (have no control over this)
python -V == "Python 2.4.3" (in $HOME/local/bin)
I get some errors during "python setup.py build" (with all GUIs disabled
in setup.py, but BUILD_IMAGE=1 and BUILD_AGG=1):
> gcc: src/mplutils.cpp
> src/mplutils.cpp: In method `Printf::Printf(const char *, ...)':
> src/mplutils.cpp:17: implicit declaration of function `int vsprintf(...)'
> src/mplutils.cpp: In method `Printf::Printf(const char *, ...)':
> src/mplutils.cpp:17: implicit declaration of function `int vsprintf(...)'
> error: Command "gcc -fno-strict-aliasing -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -fPIC -Isrc -I. -I. -I/export/home/medscan/local/include/python2.4 -c src/mplutils.cpp -o build/temp.solaris-2.9-sun4u-2.4/src/mplutils.o -DNUMARRAY=1" failed with exit status 1
When I fix this (by #include <cstdio>) it gets more errors about
redefining _FILE_OFFSET_BITS:
> running build
> running build_py
> running build_ext
> building 'matplotlib._na_transforms' extension
> gcc options: '-fno-strict-aliasing -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -fPIC'
> compile options: '-Isrc -I. -I. -I/export/home/medscan/local/include/python2.4 -c'
> extra options: '-DNUMARRAY=1'
> gcc: src/mplutils.cpp
> gcc: src/_na_transforms.cpp
> src/_na_transforms.cpp:2: limits: No such file or directory
> In file included from src/_na_transforms.cpp:5:
> src/_transforms.h:10: limits: No such file or directory
> In file included from /export/home/medscan/local/include/python2.4/Python.h:8,
> from CXX/Objects.hxx:9,
> from CXX/Extensions.hxx:19,
> from src/_transforms.h:12,
> from src/_na_transforms.cpp:5:
> /export/home/medscan/local/include/python2.4/pyconfig.h:820: warning: `_FILE_OFFSET_BITS' redefined
> /usr/include/sys/feature_tests.h:96: warning: this is the location of the previous definition
> src/_na_transforms.cpp:2: limits: No such file or directory
> In file included from src/_na_transforms.cpp:5:
> src/_transforms.h:10: limits: No such file or directory
> In file included from /export/home/medscan/local/include/python2.4/Python.h:8,
> from CXX/Objects.hxx:9,
> from CXX/Extensions.hxx:19,
> from src/_transforms.h:12,
> from src/_na_transforms.cpp:5:
> /export/home/medscan/local/include/python2.4/pyconfig.h:820: warning: `_FILE_OFFSET_BITS' redefined
> /usr/include/sys/feature_tests.h:96: warning: this is the location of the previous definition
> error: Command "gcc -fno-strict-aliasing -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -fPIC -Isrc -I. -I. -I/export/home/medscan/local/include/python2.4 -c src/_na_transforms.cpp -o build/temp.solaris-2.9-sun4u-2.4/src/_na_transforms.o -DNUMARRAY=1" failed with exit status 1
Please help, I've already written code using matplotlib under windows
and don't want to rewrite it for the move to Solaris.
Thank you,
Jett
P.S. while Windows version works fine, compiling under cygwin yields
problems like being unable to import the _agg DLL (and twiddling
permissions doesn't help) - ideas?

Does anyone know when the matplotlib install will be able to work with numpy1.0? numpy0.9.8 has a memory leak that crashes my program :(.
thanks!
 		
---------------------------------
Yahoo! Music Unlimited - Access over 1 million songs.Try it free.