matplotlib-users Mailing List for matplotlib

Thank You Scott,
        I mistook the values I assumed .1 to .8 as the total x size and expected half of it should provide me 2 half boxes.
thanks a lot for clarification.
with best regards,
Sudheer
 
***************************************************************
Sudheer Joseph 
Indian National Centre for Ocean Information Services
Ministry of Earth Sciences, Govt. of India
POST BOX NO: 21, IDA Jeedeemetla P.O.
Via Pragathi Nagar,Kukatpally, Hyderabad; Pin:5000 55
Tel:+91-40-23886047(O),Fax:+91-40-23895011(O),
Tel:+91-40-23044600(R),Tel:+91-40-9440832534(Mobile)
E-mail:sjo...@gm...;sud...@ya...
Web- http://oppamthadathil.tripod.com
***************************************************************
----- Original Message -----
> From: Scott Sinclair <sco...@gm...>
> To: "mat...@li..." <mat...@li...>
> Cc: 
> Sent: Friday, 5 April 2013 6:36 PM
> Subject: Re: [Matplotlib-users] windrose
> 
> On 5 April 2013 03:54, Sudheer Joseph <sud...@ya...> wrote:
>> Some how I am not getting the trick of the
>> rect = [0.1, 0.1, 0.8, 0.8]
>> 
>> I tried
>> rect1= [0.1,0.1,.4,.4]
>> and rect2=[.4,.4,.8,.8]
>> but did not work
> 
> You don't say exactly what you did, and how it didn't work...
> 
> If you read 
> http://matplotlib.org/api/figure_api.html?highlight=add_axes#matplotlib.figure.Figure.add_axes
> it says "Add an axes at position rect [left, bottom, width,
> height]...". So you need to specify sensible values in rect1 and
> rect2.
> 
> The following works fine for me:
> 
> import matplotlib.pyplot as plt
> fig = plt.figure()
> rect1 = [0.1, 0.1, 0.4, 0.4]
> rect2 = [0.55, 0.1, 0.4, 0.4]
> ax1 = fig.add_axes(rect1)
> ax2 = fig.add_axes(rect2)
> ax1.plot(range(3))
> ax2.plot(range(4, 8))
> plt.show()
> 
> So I would expect that you can adapt your original code to something
> like the following (untested):
> 
> from windrose import WindroseAxes
> from matplotlib import pyplot as plt
> from numpy.random import random
> 
> def new_axes(fig, rect):
>   ax = WindroseAxes(fig, rect, axisbg='w')
>   fig.add_axes(ax)
>   return ax
> 
> def set_legend(ax):
>   l = ax.legend(axespad=-0.10)
>   plt.setp(l.get_texts(), fontsize=8)
> 
> #Create wind speed and direction variables
> ws = random(500)*6
> wd = random(500)*360
> ws1 = random(500)*6
> wd1 = random(500)*360
> 
> rect1 = [0.1, 0.1, 0.4, 0.4]
> rect2 = [0.55, 0.1, 0.4, 0.4]
> 
> fig = plt.figure(figsize=(8, 8), dpi=80, facecolor='w', 
> edgecolor='w')
> 
> ax1 = new_axes(fig, rect1)
> ax2 = new_axes(fig, rect2)
> 
> #windrose like a stacked histogram with normed (displayed in percent) results
> ax1.bar(wd, ws, normed=True, opening=0.8, edgecolor='white')
> set_legend(ax1)
> 
> #windrose like a stacked histogram with normed (displayed in percent) results
> ax2.bar(wd1, ws1, normed=True, opening=0.8, edgecolor='white')
> set_legend(ax2)
> 
> plt.show()
> 
> Cheers,
> Scott
> 
> ------------------------------------------------------------------------------
> Minimize network downtime and maximize team effectiveness.
> Reduce network management and security costs.Learn how to hire 
> the most talented Cisco Certified professionals. Visit the 
> Employer Resources Portal
> http://www.cisco.com/web/learning/employer_resources/index.html
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
> 

Here's the output. I'm running OS X 10.8.3. I installed matplotlib
from homebrew.
$HOME=/Users/dect
CONFIGDIR=/Users/dect/.matplotlib
matplotlib data path /usr/local/lib/python2.7/site-packages/matplotlib/mpl-data
loaded rc file /usr/local/lib/python2.7/site-packages/matplotlib/mpl-data/matplotlibrc
matplotlib version 1.2.0
verbose.level helpful
interactive is False
platform is darwin
Using fontManager instance from /Users/dect/.matplotlib/fontList.cache
backend MacOSX version unknown
>>> mpl.__file__
'/usr/local/lib/python2.7/site-packages/matplotlib/__init__.pyc'
>>> mpl.get_backend()
'MacOSX'
>>> mpl.__version__
'1.2.0'
>>> mpl.get_configdir()
'/Users/dect/.matplotlib'
On Fri, Apr 5, 2013 at 2:07 AM, Phil Elson <pel...@gm...> wrote:
> Thanks Derek & John.
>
> Very strange. Here's my setup:
>
>>>> import matplotlib
>>>> matplotlib.__version__
> '1.2.0'
>>>> matplotlib.get_backend()
> 'TkAgg'
>
>
> Would you mind providing all of the relevant details suggested in
> http://matplotlib.org/faq/troubleshooting_faq.html#troubleshooting, along
> with the code to reproduce the problem in a new github issue?
>
> Once I have all of the necessary details, I'd be happy to have a look into
> this to see if I can find a solution.
>
> Cheers,
>
> Phil
>
>
>
> On 5 April 2013 02:02, John Gleeson <jdg...@ma...> wrote:
>>
>>
>> On 2013年04月04日, at 10:51 AM, Derek Thomas wrote:
>>
>>> ...screen capture of the display...
>>> <grab.tiff>
>>
>>
>> Derek,
>>
>> I just tried Phil's version of the code on my Mac (MP 1.2.0), and I see
>> exactly the same problem as in your grab.tiff. This is using the default
>> TkAgg backend.
>>
>> I happen to have built MP 1.2.0 with the Qt4 backend option. When I
>> prepend the lines
>>
>> from matplotlib import use
>> use("QT4Agg")
>>
>> to use Qt4, I get the expected (correct) display output.
>>
>> Apparently this is a bug somewhere in the chain TkAgg/Tkinter/Tk.
>>
>> John
>>
>

Thank you, it works flawlessly now :)
2013年3月31日 Juergen Hasch <py...@el...>
> Am 31.03.2013 08:50, schrieb Pawel Chojnacki:
>
> Thank you very much - hovewer, your solution isn't enough. Adding your
>> lines generate:
>>
>>
> The problem is this:
>
>
> RuntimeError: LaTeX was not able to process the following string:
>> u''
>> Here is the full report generated by LaTeX:
>>
>>
> Latex doesn't like the empty string. This is caused by the '\n' in your
> title.
> Can you replace your original line:
> py.title(u'Wyniki eksperymentu pomiaru gęstości ciała
> stałego\n',size='large',**family='serif')
> with the new one, as in the example I sent you:
>
> py.title(u'Wyniki eksperymentu pomiaru gęstości ciała
> stałego',size='large',family='**serif')
>
>

On 5 April 2013 03:54, Sudheer Joseph <sud...@ya...> wrote:
> Some how I am not getting the trick of the
> rect = [0.1, 0.1, 0.8, 0.8]
>
> I tried
> rect1= [0.1,0.1,.4,.4]
> and rect2=[.4,.4,.8,.8]
> but did not work
You don't say exactly what you did, and how it didn't work...
If you read http://matplotlib.org/api/figure_api.html?highlight=add_axes#matplotlib.figure.Figure.add_axes
it says "Add an axes at position rect [left, bottom, width,
height]...". So you need to specify sensible values in rect1 and
rect2.
The following works fine for me:
import matplotlib.pyplot as plt
fig = plt.figure()
rect1 = [0.1, 0.1, 0.4, 0.4]
rect2 = [0.55, 0.1, 0.4, 0.4]
ax1 = fig.add_axes(rect1)
ax2 = fig.add_axes(rect2)
ax1.plot(range(3))
ax2.plot(range(4, 8))
plt.show()
So I would expect that you can adapt your original code to something
like the following (untested):
from windrose import WindroseAxes
from matplotlib import pyplot as plt
from numpy.random import random
def new_axes(fig, rect):
 ax = WindroseAxes(fig, rect, axisbg='w')
 fig.add_axes(ax)
 return ax
def set_legend(ax):
 l = ax.legend(axespad=-0.10)
 plt.setp(l.get_texts(), fontsize=8)
#Create wind speed and direction variables
ws = random(500)*6
wd = random(500)*360
ws1 = random(500)*6
wd1 = random(500)*360
rect1 = [0.1, 0.1, 0.4, 0.4]
rect2 = [0.55, 0.1, 0.4, 0.4]
fig = plt.figure(figsize=(8, 8), dpi=80, facecolor='w', edgecolor='w')
ax1 = new_axes(fig, rect1)
ax2 = new_axes(fig, rect2)
#windrose like a stacked histogram with normed (displayed in percent) results
ax1.bar(wd, ws, normed=True, opening=0.8, edgecolor='white')
set_legend(ax1)
#windrose like a stacked histogram with normed (displayed in percent) results
ax2.bar(wd1, ws1, normed=True, opening=0.8, edgecolor='white')
set_legend(ax2)
plt.show()
Cheers,
Scott

Thanks Derek & John.
Very strange. Here's my setup:
>>> import matplotlib
>>> matplotlib.__version__
'1.2.0'
>>> matplotlib.get_backend()
'TkAgg'
Would you mind providing all of the relevant details suggested in
http://matplotlib.org/faq/troubleshooting_faq.html#troubleshooting, along
with the code to reproduce the problem in a new github issue?
Once I have all of the necessary details, I'd be happy to have a look into
this to see if I can find a solution.
Cheers,
Phil
On 5 April 2013 02:02, John Gleeson <jdg...@ma...> wrote:
>
> On 2013年04月04日, at 10:51 AM, Derek Thomas wrote:
>
> ...screen capture of the display...
>> <grab.tiff>
>>
>
> Derek,
>
> I just tried Phil's version of the code on my Mac (MP 1.2.0), and I see
> exactly the same problem as in your grab.tiff. This is using the default
> TkAgg backend.
>
> I happen to have built MP 1.2.0 with the Qt4 backend option. When I
> prepend the lines
>
> from matplotlib import use
> use("QT4Agg")
>
> to use Qt4, I get the expected (correct) display output.
>
> Apparently this is a bug somewhere in the chain TkAgg/Tkinter/Tk.
>
> John
>
>

Thank you Scott,
Some how I am not getting the trick of the 
rect = [0.1, 0.1, 0.8, 0.8]
I tried 
rect1= [0.1,0.1,.4,.4]
and rect2=[.4,.4,.8,.8] 
but did not work
Sudheer
 
***************************************************************
Sudheer Joseph 
Indian National Centre for Ocean Information Services
Ministry of Earth Sciences, Govt. of India
POST BOX NO: 21, IDA Jeedeemetla P.O.
Via Pragathi Nagar,Kukatpally, Hyderabad; Pin:5000 55
Tel:+91-40-23886047(O),Fax:+91-40-23895011(O),
Tel:+91-40-23044600(R),Tel:+91-40-9440832534(Mobile)
E-mail:sjo...@gm...;sud...@ya...
Web- http://oppamthadathil.tripod.com
***************************************************************
----- Original Message -----
> From: Scott Sinclair <sco...@gm...>
> To: "mat...@li..." <mat...@li...>
> Cc: 
> Sent: Thursday, 4 April 2013 12:37 PM
> Subject: Re: [Matplotlib-users] windrose
> 
> On 4 April 2013 06:45, Sudheer Joseph <sud...@ya...> wrote:
>>      Below is a sample script I got from windrose pack. I would like 
> to place 2 windroses side by side
> ...
>> 
>> from windrose import WindroseAxes
>> from matplotlib import pyplot as plt
> ...
>> def new_axes():
>>   fig = plt.figure(figsize=(8, 8), dpi=80, facecolor='w', 
> edgecolor='w')
>>   rect = [0.1, 0.1, 0.8, 0.8]
>>   ax = WindroseAxes(fig, rect, axisbg='w')
>>   fig.add_axes(ax)
>>   return ax
> 
> I'm not familiar with the windrose package, but it looks like the rect
> parameter to WindroseAxes specifies the size of the generated axes in
> figure co-ordinates (see
> http://matplotlib.org/api/figure_api.html?highlight=add_axes#matplotlib.figure.Figure.add_axes).
> You should be able to pass in a different list of co-ordinates for
> each WindroseAxes to get side-by-side axes on the same figure...
> 
> Cheers,
> Scott
> 
> ------------------------------------------------------------------------------
> Minimize network downtime and maximize team effectiveness.
> Reduce network management and security costs.Learn how to hire 
> the most talented Cisco Certified professionals. Visit the 
> Employer Resources Portal
> http://www.cisco.com/web/learning/employer_resources/index.html
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
> 

On 2013年04月04日, at 10:51 AM, Derek Thomas wrote:
> ...screen capture of the display...
> <grab.tiff>
Derek,
I just tried Phil's version of the code on my Mac (MP 1.2.0), and I 
see exactly the same problem as in your grab.tiff. This is using the 
default TkAgg backend.
I happen to have built MP 1.2.0 with the Qt4 backend option. When I 
prepend the lines
 from matplotlib import use
 use("QT4Agg")
to use Qt4, I get the expected (correct) display output.
Apparently this is a bug somewhere in the chain TkAgg/Tkinter/Tk.
John