matplotlib-devel Mailing List for matplotlib

Michael Droettboom skrev:
> Thanks. Unfortunately, I'm not able to reproduce any problems with the 
> font on Linux (see attached). I suspect the problem may be 
> Windows-specific, but I have no way of knowing at the moment. I'll have 
> to try this at home (no Windows at work), or maybe one of the other 
> Windows gurus on this list wants to take it up.
> 
Could it be that the static compile libraries needs to be updated? I 
rely on the precompiled versions.
/Jörgen

Michael Droettboom wrote:
> or maybe one of the other 
> Windows gurus on this list wants to take it up.
I shouldn't have said "other". I don't consider myself a guru of much 
of anything ;)
Cheers,
Mike

Thanks. Unfortunately, I'm not able to reproduce any problems with the 
font on Linux (see attached). I suspect the problem may be 
Windows-specific, but I have no way of knowing at the moment. I'll have 
to try this at home (no Windows at work), or maybe one of the other 
Windows gurus on this list wants to take it up.
Cheers,
Mike
Jörgen Stenarson wrote:
> Michael Droettboom skrev:
>> Is the font freely available, and if so, can you provide a link? I'd 
>> like to find a workaround if possible -- one shouldn't have to remove 
>> fonts just to run matplotlib.
>>
> You can download it from 
> <http://www.tradebit.com/filedetail.php/1893643-Software-Programs-Utilities> 
> 
> 
> I did a md5sum on the orlando font I had and it was the same. The 
> zipfile from download also contained a bold version which I didn't have 
> before. But both versions cause the same problem.
> 
> /Jörgen
-- 
Michael Droettboom
Science Software Branch
Operations and Engineering Division
Space Telescope Science Institute
Operated by AURA for NASA

Michael Droettboom skrev:
> Is the font freely available, and if so, can you provide a link? I'd 
> like to find a workaround if possible -- one shouldn't have to remove 
> fonts just to run matplotlib.
> 
You can download it from 
<http://www.tradebit.com/filedetail.php/1893643-Software-Programs-Utilities>
I did a md5sum on the orlando font I had and it was the same. The 
zipfile from download also contained a bold version which I didn't have 
before. But both versions cause the same problem.
/Jörgen

That did it, thanks Mike.
On Tuesday 22 January 2008 08:09:37 am Michael Droettboom wrote:
> Thanks. The "ignore existing data" flag was not getting set properly.
>
> Fixed in r4884. Please let me know how that works for you.
>
> Cheers,
> Mike
>
> Darren Dale wrote:
> > In the trunk, I noticed that relim() followed by autoscale_view() do not
> > have the same behavior as they did with the old transforms branch. For
> > example:
> >
> > l,=plot([1,2,3])
> > l.set_ydata([4,5,6])
> > gca().relim()
> > gca().autoscale_view()
> > draw()
> >
> > used to produce the same output as
> >
> > plot([4,5,6])
> >
> > but now it is equivalent to
> >
> > plot([4,5,6])
> > ylim(1,6)
> >
> > Darren
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > Matplotlib-devel mailing list
> > Mat...@li...
> > https://lists.sourceforge.net/lists/listinfo/matplotlib-devel
-- 
Darren S. Dale, Ph.D.
Staff Scientist
Cornell High Energy Synchrotron Source
Cornell University
275 Wilson Lab
Rt. 366 & Pine Tree Road
Ithaca, NY 14853
dar...@co...
office: (607) 255-3819
fax: (607) 255-9001
http://www.chess.cornell.edu

Thanks. The "ignore existing data" flag was not getting set properly.
Fixed in r4884. Please let me know how that works for you.
Cheers,
Mike
Darren Dale wrote:
> In the trunk, I noticed that relim() followed by autoscale_view() do not have 
> the same behavior as they did with the old transforms branch. For example:
> 
> l,=plot([1,2,3])
> l.set_ydata([4,5,6])
> gca().relim()
> gca().autoscale_view()
> draw()
> 
> used to produce the same output as
> 
> plot([4,5,6])
> 
> but now it is equivalent to 
> 
> plot([4,5,6])
> ylim(1,6)
> 
> Darren
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Matplotlib-devel mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-devel
-- 
Michael Droettboom
Science Software Branch
Operations and Engineering Division
Space Telescope Science Institute
Operated by AURA for NASA

Is the font freely available, and if so, can you provide a link? I'd 
like to find a workaround if possible -- one shouldn't have to remove 
fonts just to run matplotlib.
Cheers,
Mike
Jörgen Stenarson wrote:
> Michael Droettboom skrev:
>> I haven't seen this issue. It may just be a dirty compilation 
>> problem. Often distutils doesn't rebuild enough. Try removing the 
>> build directory and then build/install.
>>
>> If that's not the case, we'll need to track down which font is 
>> tripping it up. Set "verbose.level" to "debug-annoying" and then send 
>> us the output.
>>
> I get the crash on font orlando.ttf. If I delete this font there is no 
> crash.
> 
> /Jörgen
-- 
Michael Droettboom
Science Software Branch
Operations and Engineering Division
Space Telescope Science Institute
Operated by AURA for NASA