matplotlib-devel Mailing List for matplotlib

Hi,
Why is the code for passing plot_kw only implemented for the vertical 
errorbars?
Here is a patch to make things symmetric if this is appropriate. (It 
is what I expected...)
This would fix the old problem discussed in
http://article.gmane.org/gmane.comp.python.matplotlib.general/425
Michael.
matplotlib/lib/matplotlib/axes.py

John Hunter wrote:
> I am not a wx user, so I leave it to the rest of you to
> confirm and or vet these changes.
I just built and tested SVN trunk on OS-X 10.4.9 with:
python 2.4 with wxPython2.6.3
and
python 2.5 with wxPython2.8.4
Not extensive testing, but it seems to work fine. Thanks!
NOTE: I first installed it over the older one in python2.4 with 
wxPython2.6, and got a garbage image. Then I deleted the old one, and 
re-installed, and it worked fine. I suspect that I had an old 
accelerator with the old one, which doesn't work right with the new one. 
It wasn't over-written, as the accelerator isn't being built by default 
anymore.
-- 
Christopher Barker, Ph.D.
Oceanographer
Emergency Response Division
NOAA/NOS/OR&R (206) 526-6959 voice
7600 Sand Point Way NE (206) 526-6329 fax
Seattle, WA 98115 (206) 526-6317 main reception
Chr...@no...

I've been running MPL 0.90 rev3250 since April 18 on numerous computers
around here using the wxAgg backend using stock wx on both Ubuntu Edgy
and Ubuntu Feisty. A quick look into exactly what that means shows that
Edgy is using 2.6 by default and 2.8 is used by Feisty. Therefore, I
conclude that, if your changes were present in that revision, everything
seems to be working OK for both 2.6 and 2.8.
Ken McIvor wrote:
> On May 31, 2007, at 12:42 PM, Christopher Barker wrote:
> 
>> I think all the real work is done, but I"m not totally sure what's
>> checked in now. There may be some changes needed to the build 
>> scripts so
>> that it doesn't try to build the accelerator by default.
>> 
>
> I'm not sure either. My modifications of setup.py, which disable the 
> accelerator for wxPython >= 2.8, should already be in the trunk. I 
> also modified backend_wxagg.py to ignore the accelerator when running 
> with 2.8. I haven't heard any negative feedback about these changes, 
> but I'm not sure anyone has rigorously tested them.
>
> 
>> I propose that we just stop building the accelerator, and if people 
>> want
>> better performance they need to switch to 2.8 (actually, I think the
>> pre-2.8 code could be improved with pure python too, but I"m not going
>> to bother, as I use 2.8 anyway)
>> 
>
> I'm fine with that, given that the difficulties of getting the 
> accelerator built under Debian and Ubuntu make it pretty useless to 
> my current target audience. It should be as simple making 
> BUILD_WXAGG default to False.
>
> Ken
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Matplotlib-devel mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-devel
>