T3 Gemstone O1 is a high-performance 64-bit quad-core single board computer designed for AI, vision, and embedded edge applications.
It integrates GPU, DSP, and dedicated AI accelerators for demanding workloads while maintaining low power consumption.
T3 Gemstone O1 Front View T3 Gemstone O1 Back View
π Learn more or purchase at t3gemstone.org
The T3 Gemstone O1 is an all-in-one embedded platform built for developers, researchers, and industrial applications requiring advanced multimedia, connectivity, and AI capabilities.
With a 64-bit ARM architecture and TI system-on-chip foundation, it offers rich interfaces for sensors, cameras, and displays β making it ideal for robotics, computer vision, and edge AI systems.
| Feature | Description |
|---|---|
| Processor | Quad-core ARM Cortex-A53 @1.4 GHz with integrated GPU DSP and AI accelerators |
| Memory | 4 GB LPDDR4 RAM |
| Wi-Fi | Wi-Fi 5 β 802.11a/b/g/n/ac dual-band 2.4/5 GHz, 2x2 MIMO up to 867 Mbps (Fn-Link 6222B-SRC, Realtek RTL8822CS) |
| Bluetooth | Bluetooth 5.0 (BLE) |
| Onboard Storage | 32 GB onboard eMMC (High-speed onboard flash storage) , 512Kbit EEPROM (I2C-compatible serial EEPROM for configuration storage) |
| Storage | microSD slot (Supports high-speed SDR104 mode), M.2 2280 SSD Port (Supports high-capacity NVMe SSD) |
| USB Ports | 2 Γγ°γ€ USB 3.0 Type-A (5 Gbps), 1 Γγ°γ€ USB 2.0 Type-A, 1 Γγ°γ€ USB 2.0 Type-C (Device + PD support) |
| Ethernet | Gigabit Ethernet |
| Display / Camera | 1 x 4-lane MIPI camera/display transceivers (Supports wide range of touch displays such as Raspberry Pi 7" or Waveshare 7" and 10.1" displays) , 1 x 4-lane MIPI camera (Supports wide range of camera modules such as Raspberry Pi Camera V2) |
| Display Output | 1 x HDMI display |
| Expansion Connector | 40-pin GPIO Header (Default pinout is compatible with Raspberry Pi) |
| JTAG Connect | 1 x JTAG (ARM Cortex 10-pin JTAG connector for debugging Cortex-R5 MCU cores) |
| Real-time Clock (RTC) | Maxim DS1340 (I2C RTC module with external battery connector (2-pin JST SH)) |
| CAN Bus | CAN FD transceiver for automotive applications |
| Debug UART | 3-pin 2.54mm connector provides access to serial console for debugging and system management |
| Power | USB Type-C Power (5-9V / 3A), DC Power Connector (5-12V / 5A) |
| Power button | On/Off included |
| Fan connector | 4-pin JST SH connector for active cooling solutions with PWM fan control |
| Boot Mode Switch | Hardware switch for selecting different boot modes and configurations |
| Motion Sensing Sensor | InvenSense ICM-20948 (9-Axis MEMS MotionTracking sensor with accelerometer, gyroscope, and magnetometer) |
| Environmental Monitoring Sensors | Bosch BMP390 (24-bit barometric pressure sensor) , TI HDC2010 (Humidity and temperature sensor) |
T3 Gemstone O1 Front Annotated
You can access a box design that can be printed with a 3D printer from the file 3d-printer/t3-gem-o1-protective-case.zip
We welcome contributions, community projects, and feedback!
Visit our Community or contact us via support@t3gemstone.org