e-paper typing software and hardware
For now, this repo is for collecting relevant information for the prototyping of the typeO using a remarkable and a keyboard.
The pogo pin connector is in prototype stage. The goal of this device is to provide keyboard access to the reMarkable 2 through the Pogo pins, which have OTG support (unlike the USB C port).
https://www.youtube.com/watch?v=7q5tBEi4npA
- Pogo pin header:
- Straight: https://www.digikey.com/en/products/detail/821-22-005-10-001101/ED8198-05-ND/1146577?itemSeq=360991255
- Right-angle: https://www.digikey.com/en/products/detail/mill-max-manufacturing-corp/829-22-005-20-001101/2416226
- Long: https://www.digikey.com/en/products/detail/mill-max-manufacturing-corp/816-22-005-10-003101/6149711
- USB C breakout: https://www.digikey.com/en/products/detail/4090/1528-2873-ND/9951930?itemSeq=360991872
- 5.1 kOhm resistor
- 1/8in x 1/2in magnets: https://www.kjmagnetics.com/proddetail.asp?prod=D28-N52&cat=168
- tiny dip switch on the PCB for hackability: https://www.digikey.com/en/products/detail/e-switch/KAE01SGGT/3749638
The 3D printed part holds the magnets and pogo pin headers together and friction fits onto the remarkable. The magnets and flange help it align, and the pins should contact.
