glider 0.10.0 usage:
 -checkdisabledonly
 	check disabled fowarders only
 -checkinterval int
 	proxy check interval(seconds) (default 30)
 -checktimeout int
 	proxy check timeout(seconds) (default 10)
 -checkwebsite string
 	proxy check HTTP(NOT HTTPS) website address, format: HOST[:PORT], default port: 80 (default "www.apple.com")
 -config string
 	config file path
 -dialtimeout int
 	dial timeout(seconds) (default 3)
 -dns string
 	local dns server listen address
 -dnsalwaystcp
 	always use tcp to query upstream dns servers no matter there is a forwarder or not
 -dnsmaxttl int
 	maximum TTL value for entries in the CACHE(seconds) (default 1800)
 -dnsminttl int
 	minimum TTL value for entries in the CACHE(seconds)
 -dnsrecord value
 	custom dns record, format: domain/ip
 -dnsserver value
 	remote dns server address
 -dnstimeout int
 	timeout value used in multiple dnsservers switch(seconds) (default 3)
 -forward value
 	forward url, format: SCHEME://[USER|METHOD:PASSWORD@][HOST]:PORT?PARAMS[,SCHEME://[USER|METHOD:PASSWORD@][HOST]:PORT?PARAMS]
 -include value
 	include file
 -interface string
 	source ip or source interface
 -listen value
 	listen url, format: SCHEME://[USER|METHOD:PASSWORD@][HOST]:PORT?PARAMS
 -maxfailures int
 	max failures to change forwarder status to disabled (default 3)
 -relaytimeout int
 	relay timeout(seconds)
 -rulefile value
 	rule file path
 -rules-dir string
 	rule file folder
 -strategy string
 	forward strategy, default: rr (default "rr")
 -verbose
 	verbose mode
Available schemes:
 listen: mixed ss socks5 http redir redir6 tcptun udptun uottun tls unix kcp
 forward: reject ss socks4 socks5 http ssr ssh vmess trojan tls ws unix kcp simple-obfs
SS scheme:
 ss://method:pass@host:port
Available methods for ss:
 AEAD Ciphers:
 AEAD_AES_128_GCM AEAD_AES_192_GCM AEAD_AES_256_GCM AEAD_CHACHA20_POLY1305 AEAD_XCHACHA20_POLY1305
 Stream Ciphers:
 AES-128-CFB AES-128-CTR AES-192-CFB AES-192-CTR AES-256-CFB AES-256-CTR CHACHA20-IETF XCHACHA20 CHACHA20 RC4-MD5
 Alias:
 chacha20-ietf-poly1305 = AEAD_CHACHA20_POLY1305, xchacha20-ietf-poly1305 = AEAD_XCHACHA20_POLY1305
 Plain: DUMMY
SSR scheme:
 ssr://method:pass@host:port?protocol=xxx&protocol_param=yyy&obfs=zzz&obfs_param=xyz
SSH scheme:
 ssh://user[:pass]@host:port[?key=keypath]
VMess scheme:
 vmess://[security:]uuid@host:port?alterID=num
Trojan scheme:
 trojan://pass@host:port[?skipVerify=true]
Available securities for vmess:
 none, aes-128-gcm, chacha20-poly1305
TLS client scheme:
 tls://host:port[?skipVerify=true]
Proxy over tls client:
 tls://host:port[?skipVerify=true],scheme://
 tls://host:port[?skipVerify=true],http://[user:pass@]
 tls://host:port[?skipVerify=true],socks5://[user:pass@]
 tls://host:port[?skipVerify=true],vmess://[security:]uuid@?alterID=num
TLS server scheme:
 tls://host:port?cert=PATH&key=PATH
Proxy over tls server:
 tls://host:port?cert=PATH&key=PATH,scheme://
 tls://host:port?cert=PATH&key=PATH,http://
 tls://host:port?cert=PATH&key=PATH,socks5://
 tls://host:port?cert=PATH&key=PATH,ss://method:pass@
Websocket scheme:
 ws://host:port[/path][?host=HOST]
Websocket with a specified proxy protocol:
 ws://host:port[/path][?host=HOST],scheme://
 ws://host:port[/path][?host=HOST],http://[user:pass@]
 ws://host:port[/path][?host=HOST],socks5://[user:pass@]
 ws://host:port[/path][?host=HOST],vmess://[security:]uuid@?alterID=num
TLS and Websocket with a specified proxy protocol:
 tls://host:port[?skipVerify=true],ws://[@/path[?host=HOST]],scheme://
 tls://host:port[?skipVerify=true],ws://[@/path[?host=HOST]],http://[user:pass@]
 tls://host:port[?skipVerify=true],ws://[@/path[?host=HOST]],socks5://[user:pass@]
 tls://host:port[?skipVerify=true],ws://[@/path[?host=HOST]],vmess://[security:]uuid@?alterID=num
Unix domain socket scheme:
 unix://path
KCP scheme:
 kcp://CRYPT:KEY@host:port[?dataShards=NUM&parityShards=NUM]
Available crypt types for KCP:
 none, sm4, tea, xor, aes, aes-128, aes-192, blowfish, twofish, cast5, 3des, xtea, salsa20
Simple-Obfs scheme:
 simple-obfs://host:port[?type=TYPE&host=HOST&uri=URI&ua=UA]
Available types for simple-obfs:
 http, tls
DNS forwarding server:
 dns=:53
 dnsserver=8.8.8.8:53
 dnsserver=1.1.1.1:53
 dnsrecord=www.example.com/1.2.3.4
 dnsrecord=www.example.com/2606:2800:220:1:248:1893:25c8:1946
Available forward strategies:
 rr: Round Robin mode
 ha: High Availability mode
 lha: Latency based High Availability mode
 dh: Destination Hashing mode
Forwarder option scheme: FORWARD_URL#OPTIONS
 priority: set the priority of that forwarder, default:0
 interface: set local interface or ip address used to connect remote server
 -
 Examples:
 socks5://1.1.1.1:1080#priority=100
 vmess://[security:]uuid@host:port?alterID=num#priority=200
 vmess://[security:]uuid@host:port?alterID=num#priority=200&interface=192.168.1.99
 vmess://[security:]uuid@host:port?alterID=num#priority=200&interface=eth0
Config file format(see `./glider.conf.example` as an example):
 # COMMENT LINE
 KEY=VALUE
 KEY=VALUE
 # KEY equals to command line flag name: listen forward strategy...
Examples:
 ./glider -config glider.conf
 -run glider with specified config file.
 ./glider -listen :8443 -verbose
 -listen on :8443, serve as http/socks5 proxy on the same port, in verbose mode.
 ./glider -listen ss://AEAD_CHACHA20_POLY1305:pass@:8443 -verbose
 -listen on 0.0.0.0:8443 as a ss server.
 ./glider -listen socks5://user1:pass1@:1080 -verbose
 -listen on :1080 as a socks5 proxy server, enable authentication.
 ./glider -listen tls://:443?cert=crtFilePath&key=keyFilePath,http:// -verbose
 -listen on :443 as a https(http over tls) proxy server.
 ./glider -listen http://:8080 -forward socks5://127.0.0.1:1080
 -listen on :8080 as a http proxy server, forward all requests via socks5 server.
 ./glider -listen redir://:1081 -forward ss://method:pass@1.1.1.1:8443
 -listen on :1081 as a transparent redirect server, forward all requests via remote ss server.
 ./glider -listen redir://:1081 -forward "ssr://method:pass@1.1.1.1:8444?protocol=a&protocol_param=b&obfs=c&obfs_param=d"
 -listen on :1081 as a transparent redirect server, forward all requests via remote ssr server.
 ./glider -listen redir://:1081 -forward "tls://1.1.1.1:443,vmess://security:uuid@?alterID=10"
 -listen on :1081 as a transparent redirect server, forward all requests via remote tls+vmess server.
 ./glider -listen redir://:1081 -forward "ws://1.1.1.1:80,vmess://security:uuid@?alterID=10"
 -listen on :1081 as a transparent redirect server, forward all requests via remote ws+vmess server.
 ./glider -listen tcptun://:80=2.2.2.2:80 -forward ss://method:pass@1.1.1.1:8443
 -listen on :80 and forward all requests to 2.2.2.2:80 via remote ss server.
 ./glider -listen udptun://:53=8.8.8.8:53 -forward ss://method:pass@1.1.1.1:8443
 -listen on :53 and forward all udp requests to 8.8.8.8:53 via remote ss server.
 ./glider -listen uottun://:53=8.8.8.8:53 -forward ss://method:pass@1.1.1.1:8443
 -listen on :53 and forward all udp requests via udp over tcp tunnel.
 ./glider -listen socks5://:1080 -listen http://:8080 -forward ss://method:pass@1.1.1.1:8443
 -listen on :1080 as socks5 server, :8080 as http proxy server, forward all requests via remote ss server.
 ./glider -listen redir://:1081 -dns=:53 -dnsserver=8.8.8.8:53 -forward ss://method:pass@server1:port1,ss://method:pass@server2:port2
 -listen on :1081 as transparent redirect server, :53 as dns server, use forward chain: server1 -> server2.
 ./glider -listen socks5://:1080 -forward ss://method:pass@server1:port1 -forward ss://method:pass@server2:port2 -strategy rr
 -listen on :1080 as socks5 server, forward requests via server1 and server2 in round robin mode.
 ./glider -verbose -dns=:53 -dnsserver=8.8.8.8:53 -dnsrecord=www.example.com/1.2.3.4
 -listen on :53 as dns server, forward dns requests to 8.8.8.8:53, return 1.2.3.4 when resolving www.example.com.