A small project that allows you to gather statistics (counters) from files on the file system or command outputs. This was designed for Linux.
This is useful for retrieving the incoming/outgoing packets or bytes per second on a network interface from the file system or from the output of a command such as ethtool.
You can simply use make to build this program. The Makefile uses clang to compile the program.
apt-get install clang # (Debian/Ubuntu-based systems)
yum install devtoolset-7 llvm-toolset-7 llvm-toolset-7-clang-analyzer llvm-toolset-7-clang-tools-extra # (CentOS/Others)
make
You may use make install to copy the gstat executable to your $PATH via /usr/bin.
Note - We use gstat instead of stat due to other common packages.
General command line usage can be found below.
gstat [-i <interface> --pps --bps --path <path> -c <"kbps" or "mbps" or "gbps"> --custom <integer>]
--pps => Set path to RX packet path.
--bps => Set path to RX byte path.
-p --path => Use count (integer) from a given path on file system.
-i --dev => The name of the interface to use when setting --pps or --bps.
-c --convert => Convert to either "kbps", "mbps", or "gbps".
--custom => Divides the count value by this much before outputting to stdout.
--interval => Use this interval (in microseconds) instead of one second.
--count -n => Maximum amount of times to request the counter before stopping program (0 = no limit).
--time -t => Time limit (in seconds) before stopping program (0 = no limit).
--cmd => The command to execute and retrieve output from.
--sep => The separator to apply to the command's output.
--key => The key to search for when separating the command output.
Note - If you want to receive another counter such as outgoing (TX) packets, you can set the file to pull the count from with the -p (or --path) flag. For example:
gstat --path /sys/class/net/ens18/statistics/tx_packets
You may use a combination of the --cmd, --sep, and --key arguments to retrieve a counter from a command's output such as ethtool.
For example, take a look at the following output from ethtool.
$ sudo ethtool -S enp1s0 NIC statistics: rx_queue_0_packets: 901268 rx_queue_0_bytes: 211930005 rx_queue_0_drops: 0 rx_queue_0_xdp_packets: 0 rx_queue_0_xdp_tx: 0 rx_queue_0_xdp_redirects: 0 rx_queue_0_xdp_drops: 0 rx_queue_0_kicks: 14 rx_queue_1_packets: 1237084 rx_queue_1_bytes: 469671713 rx_queue_1_drops: 0 rx_queue_1_xdp_packets: 0 rx_queue_1_xdp_tx: 0 rx_queue_1_xdp_redirects: 0 rx_queue_1_xdp_drops: 0 rx_queue_1_kicks: 19 tx_queue_0_packets: 16508781 tx_queue_0_bytes: 1528281628 tx_queue_0_xdp_tx: 0 tx_queue_0_xdp_tx_drops: 0 tx_queue_0_kicks: 6598201 tx_queue_0_tx_timeouts: 0 tx_queue_1_packets: 16154602 tx_queue_1_bytes: 1348764220 tx_queue_1_xdp_tx: 0 tx_queue_1_xdp_tx_drops: 0 tx_queue_1_kicks: 6051221 tx_queue_1_tx_timeouts: 0
If you want the rx_queue_0_packets value used as the counter (starting at 901268), you would execute the following command.
sudo gstat --cmd "ethtool -S enp1s0" --sep ":" --key "rx_queue_0_packets"
Each line from the command's output is trimmed of white-spaces.