• 1.1 :Connect the MCU and Xshell with UART port.

 | | | _.--------._
 .-----. | PC |
--|o |----UART_TX----| Xshell |
--| |----UART_RX----| |
 '-----' '----------'
 | | |

• 1.2 :Check this demo: (My terminal: Xshell, you can also choose SecureCRT if you like)

demo.gif

• 1.3 :Here is my configurations of Xshell: Xshell_Appearance Xshell_Keyboard Xshell_VT_Modes Xshell_Advanced Xshell_Appearance

• 2.1 :一个命令行运行在stm32上,只需要提供一个串口即可实现。
• 2.2 :配合队列处理串口数据,快速响应并退出中断。
• 2.3 :可以移植到任意嵌入式系统,甚至51、AVR、PIC、stm8s、esp8266、esp32、Arduino等。
• 2.4 :命令支持后续扩展,支持多种颜色的log输出到终端,方便调试。
• 2.5 :支持历史命令查询,历史命令条数可自定义。

• 2.1 : This project is a shell, a CLI(command line interface) like linux shell, demo project is based on STM32(a serial com port is needed).
• 2.2 : A fifo queue added for faster IRQ handler.
• 2.3 : You can port this shell into an embeded system, even 51, AVR, PIC, stm8s, esp8266, esp32, Arduino and so on..
• 2.4 : You can also add your own commands, it is helpful for programmers to debug, also support colorful debug fonts.
• 2.5 : History command support, and modify the amount of history that you want to save.

• Login Support.
• Command Completion.
• Need Your Advise.