This is a 3D-printable case designed for the ESP32-S3 SuperMini development board, intended to transform it into a robust and portable FIDO2 hardware security key.
This case requires the pico-fido firmware, available from the author's open-source repository at: polhenarejos/pico-fido
Key Features:
Custom-Fit: Perfectly tailored for the ESP32-S3 SuperMini board and fully compatible with the pico-fido2 project.
Full Protection: The full-enclosure design effectively shields the circuit board from daily bumps and damage.
Precise Cutouts: Features precise openings for the USB-C port and function buttons, ensuring easy access and operation.
Ready to Print: The repository includes an optimized .STL file, ready for immediate 3D printing.
Additional Notes:
For a more permanent and secure assembly, it is recommended to use a small amount of AB glue (epoxy resin) to bond the case together. Be careful to avoid getting glue on the buttons or the USB-C port.
This project is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0). You are free to share and adapt this work, provided you give appropriate credit, use it for non-commercial purposes, and distribute your contributions under the same license.
This project is created by [GN998] and is officially published and maintained ONLY on GitHub.
- ** Official Repository:**
https://github.com/GN998/MiniKey
Unauthorized mirrors of this repository may be found on other platforms . please visit the official GitHub repository.