-
Notifications
You must be signed in to change notification settings - Fork 205
Tutorial FractalTree
Firstoff, include the BOSL2 library, then make a starting module that just has a tapered cylinder for the tree trunk.
include <BOSL2/std.scad> module tree(l=1500, sc=0.7) cylinder(h=l, d1=l/5, d2=l/5*sc); tree();
Figure 1
You can attach a branch to the top of the trunk by using attach() as a child of the trunk cylinder.
include <BOSL2/std.scad> module tree(l=1500, sc=0.7) cylinder(h=l, d1=l/5, d2=l/5*sc) attach(TOP) yrot(30) cylinder(h=l*sc, d1=l/5*sc, d2=l/5*sc*sc); tree();
Figure 2
Instead of attaching each branch individually, you can make multiple copies of one branch, that are rotated relative to each other.
include <BOSL2/std.scad> module tree(l=1500, sc=0.7) cylinder(h=l, d1=l/5, d2=l/5*sc) attach(TOP) zrot_copies(n=2) // Replicate that branch yrot(30) cylinder(h=l*sc, d1=l/5*sc, d2=l/5*sc*sc); tree();
Figure 3
Since branches look much like the main trunk, we can make the tree recursive. Don't forget the termination clause, or else it'll try to recurse forever!
include <BOSL2/std.scad> module tree(l=1500, sc=0.7, depth=10) cylinder(h=l, d1=l/5, d2=l/5*sc) attach(TOP) if (depth>0) { // Important! zrot_copies(n=2) yrot(30) tree(depth=depth-1, l=l*sc, sc=sc); } tree();
Figure 4
A flat planar tree isn't what we want, so lets bush it out a bit by rotating each level 90 degrees.
include <BOSL2/std.scad> module tree(l=1500, sc=0.7, depth=10) cylinder(h=l, d1=l/5, d2=l/5*sc) attach(TOP) if (depth>0) { zrot(90) // Bush it out zrot_copies(n=2) yrot(30) tree(depth=depth-1, l=l*sc, sc=sc); } tree();
Figure 5
Let's add leaves. They look much like squashed versions of the standard teardrop() module, so lets use that.
include <BOSL2/std.scad> module tree(l=1500, sc=0.7, depth=10) cylinder(h=l, d1=l/5, d2=l/5*sc) attach(TOP) if (depth>0) { zrot(90) zrot_copies(n=2) yrot(30) tree(depth=depth-1, l=l*sc, sc=sc); } else { yscale(0.67) teardrop(d=l*3, l=1, anchor=BOT, spin=90); } tree();
Figure 6
We can finish this off with some color. The color() module will force all it's children and
their descendants to the new color, even if they were colored before. The recolor() module,
however, will only color children and decendants that don't already have a color set by a more
nested recolor().
include <BOSL2/std.scad> module tree(l=1500, sc=0.7, depth=10) recolor("lightgray") cylinder(h=l, d1=l/5, d2=l/5*sc) attach(TOP) if (depth>0) { zrot(90) zrot_copies(n=2) yrot(30) tree(depth=depth-1, l=l*sc, sc=sc); } else { recolor("springgreen") yscale(0.67) teardrop(d=l*3, l=1, anchor=BOT, spin=90); } tree();
Figure 7
Table of Contents
Function Index
Topics Index
Cheat Sheet
Tutorials
Basic Modeling:
- constants.scad STD
- transforms.scad STD
- attachments.scad STD
- shapes2d.scad STD
- shapes3d.scad STD
- masks.scad STD
- drawing.scad STD
- distributors.scad STD
- color.scad STD
- partitions.scad STD
- miscellaneous.scad STD
Advanced Modeling:
- paths.scad STD
- regions.scad STD
- skin.scad STD
- vnf.scad STD
- beziers.scad STD
- nurbs.scad
- rounding.scad STD
- turtle3d.scad
- isosurface.scad
Math:
- math.scad STD
- linalg.scad STD
- vectors.scad STD
- coords.scad STD
- geometry.scad STD
- trigonometry.scad STD
Data Management:
- version.scad STD
- comparisons.scad STD
- lists.scad STD
- utility.scad STD
- strings.scad STD
- structs.scad STD
- fnliterals.scad
Threaded Parts:
Parts:
- ball_bearings.scad
- cubetruss.scad
- gears.scad
- hinges.scad
- joiners.scad
- linear_bearings.scad
- modular_hose.scad
- nema_steppers.scad
- polyhedra.scad
- sliders.scad
- tripod_mounts.scad
- walls.scad
- wiring.scad
- hooks.scad
STD = Included in std.scad