开源 企业版 高校版 私有云 模力方舟 AI 队友
代码拉取完成,页面将自动刷新
加入 Gitee
与超过 1400万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
已有帐号? 立即登录
文件
master
分支 (1)
master
master
分支 (1)
master
克隆/下载
克隆/下载
提示
下载代码请复制以下命令到终端执行
为确保你提交的代码身份被 Gitee 正确识别,请执行以下命令完成配置
初次使用 SSH 协议进行代码克隆、推送等操作时,需按下述提示完成 SSH 配置
1 生成 RSA 密钥
2 获取 RSA 公钥内容,并配置到 SSH公钥
在 Gitee 上使用 SVN,请访问 使用指南
使用 HTTPS 协议时,命令行会出现如下账号密码验证步骤。基于安全考虑,Gitee 建议 配置并使用私人令牌 替代登录密码进行克隆、推送等操作
Username for 'https://gitee.com': userName
Password for 'https://userName@gitee.com': # 私人令牌
master
分支 (1)
master
python
/
Modules
/
zlib
/
make_vms.com
python
/
Modules
/
zlib
/
make_vms.com
make_vms.com 12.92 KB
一键复制 编辑 原始数据 按行查看 历史
feng 提交于 2015年10月01日 10:15 +08:00 . python
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461
$! make libz under VMS written by
$! Martin P.J. Zinser
$! <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
$!
$ on error then goto err_exit
$!
$!
$! Just some general constants...
$!
$ true = 1
$ false = 0
$ tmpnam = "temp_" + f$getjpi("","pid")
$ SAY = "WRITE SYS$OUTPUT"
$!
$! Setup variables holding "config" information
$!
$ Make = ""
$ name = "Zlib"
$ version = "?.?.?"
$ v_string = "ZLIB_VERSION"
$ v_file = "zlib.h"
$ ccopt = ""
$ lopts = ""
$ linkonly = false
$ optfile = name + ".opt"
$ its_decc = false
$ its_vaxc = false
$ its_gnuc = false
$ axp = f$getsyi("HW_MODEL").ge.1024
$ s_case = false
$! Check for MMK/MMS
$!
$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
$!
$!
$ gosub find_version
$!
$ gosub check_opts
$!
$! Look for the compiler used
$!
$ gosub check_compiler
$ if its_decc
$ then
$ ccopt = "/prefix=all" + ccopt
$ if f$trnlnm("SYS") .eqs. ""
$ then
$ if axp
$ then
$ define sys sys$library:
$ else
$ ccopt = "/decc" + ccopt
$ define sys decc$library_include:
$ endif
$ endif
$ endif
$ if its_vaxc .or. its_gnuc
$ then
$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
$ endif
$!
$! Build the thing plain or with mms
$!
$ write sys$output "Compiling Zlib sources ..."
$ if make.eqs.""
$ then
$ dele example.obj;*,minigzip.obj;*
$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
adler32.c zlib.h zconf.h
$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
compress.c zlib.h zconf.h
$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
crc32.c zlib.h zconf.h
$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
deflate.c deflate.h zutil.h zlib.h zconf.h
$ CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
gzio.c zutil.h zlib.h zconf.h
$ CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
inffast.c zutil.h zlib.h zconf.h inffast.h
$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
inflate.c zutil.h zlib.h zconf.h infblock.h
$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
inftrees.c zutil.h zlib.h zconf.h inftrees.h
$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
trees.c deflate.h zutil.h zlib.h zconf.h
$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
uncompr.c zlib.h zconf.h
$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
zutil.c zutil.h zlib.h zconf.h
$ write sys$output "Building Zlib ..."
$ CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
$ write sys$output "Building example..."
$ CALL MAKE example.OBJ "CC ''CCOPT' example" -
example.c zlib.h zconf.h
$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
$ if f$search("x11vms:xvmsutils.olb") .nes. ""
$ then
$ write sys$output "Building minigzip..."
$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
minigzip.c zlib.h zconf.h
$ call make minigzip.exe -
"LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
minigzip.obj libz.olb
$ endif
$ else
$ gosub crea_mms
$ SAY "Make ''name' ''version' with ''Make' "
$ 'make'
$ endif
$!
$! Alpha gets a shareable image
$!
$ If axp
$ Then
$ gosub crea_olist
$ write sys$output "Creating libzshr.exe"
$ call anal_obj_axp modules.opt _link.opt
$ if s_case
$ then
$ open/append optf modules.opt
$ write optf "case_sensitive=YES"
$ close optf
$ endif
$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,_link.opt/opt
$ endif
$ write sys$output "Zlib build completed"
$ exit
$CC_ERR:
$ write sys$output "C compiler required to build ''name'"
$ goto err_exit
$ERR_EXIT:
$ set message/facil/ident/sever/text
$ write sys$output "Exiting..."
$ exit 2
$!
$!
$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES
$ V = 'F$Verify(0)
$! P1 = What we are trying to make
$! P2 = Command to make it
$! P3 - P8 What it depends on
$
$ If F$Search(P1) .Eqs. "" Then Goto Makeit
$ Time = F$CvTime(F$File(P1,"RDT"))
$arg=3
$Loop:
$ Argument = P'arg
$ If Argument .Eqs. "" Then Goto Exit
$ El=0
$Loop2:
$ File = F$Element(El," ",Argument)
$ If File .Eqs. " " Then Goto Endl
$ AFile = ""
$Loop3:
$ OFile = AFile
$ AFile = F$Search(File)
$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
$ Goto Loop3
$NextEL:
$ El = El + 1
$ Goto Loop2
$EndL:
$ arg=arg+1
$ If arg .Le. 8 Then Goto Loop
$ Goto Exit
$
$Makeit:
$ VV=F$VERIFY(0)
$ write sys$output P2
$ 'P2
$ VV='F$Verify(VV)
$Exit:
$ If V Then Set Verify
$ENDSUBROUTINE
$!------------------------------------------------------------------------------
$!
$! Check command line options and set symbols accordingly
$!
$ CHECK_OPTS:
$ i = 1
$ OPT_LOOP:
$ if i .lt. 9
$ then
$ cparm = f$edit(p'i',"upcase")
$ if cparm .eqs. "DEBUG"
$ then
$ ccopt = ccopt + "/noopt/deb"
$ lopts = lopts + "/deb"
$ endif
$ if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ ccopt = ccopt + f$extract(start,len,cparm)
$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
then s_case = true
$ endif
$ if cparm .eqs. "LINK" then linkonly = true
$ if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ lopts = lopts + f$extract(start,len,cparm)
$ endif
$ if f$locate("CC=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ cc_com = f$extract(start,len,cparm)
if (cc_com .nes. "DECC") .and. -
(cc_com .nes. "VAXC") .and. -
(cc_com .nes. "GNUC")
$ then
$ write sys$output "Unsupported compiler choice ''cc_com' ignored"
$ write sys$output "Use DECC, VAXC, or GNUC instead"
$ else
$ if cc_com .eqs. "DECC" then its_decc = true
$ if cc_com .eqs. "VAXC" then its_vaxc = true
$ if cc_com .eqs. "GNUC" then its_gnuc = true
$ endif
$ endif
$ if f$locate("MAKE=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ mmks = f$extract(start,len,cparm)
$ if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
$ then
$ make = mmks
$ else
$ write sys$output "Unsupported make choice ''mmks' ignored"
$ write sys$output "Use MMK or MMS instead"
$ endif
$ endif
$ i = i + 1
$ goto opt_loop
$ endif
$ return
$!------------------------------------------------------------------------------
$!
$! Look for the compiler used
$!
$CHECK_COMPILER:
$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
$ then
$ its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
$ its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "")
$ its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "")
$ endif
$!
$! Exit if no compiler available
$!
$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
$ then goto CC_ERR
$ else
$ if its_decc then write sys$output "CC compiler check ... Compaq C"
$ if its_vaxc then write sys$output "CC compiler check ... VAX C"
$ if its_gnuc then write sys$output "CC compiler check ... GNU C"
$ endif
$ return
$!------------------------------------------------------------------------------
$!
$! If MMS/MMK are available dump out the descrip.mms if required
$!
$CREA_MMS:
$ write sys$output "Creating descrip.mms..."
$ create descrip.mms
$ open/append out descrip.mms
$ copy sys$input: out
$ deck
# descrip.mms: MMS description file for building zlib on VMS
# written by Martin P.J. Zinser
# <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj, infback.obj\
deflate.obj, trees.obj, zutil.obj, inflate.obj, \
inftrees.obj, inffast.obj
$ eod
$ write out "CFLAGS=", ccopt
$ write out "LOPTS=", lopts
$ copy sys$input: out
$ deck
all : example.exe minigzip.exe libz.olb
@ write sys$output " Example applications available"
libz.olb : libz.olb($(OBJS))
@ write sys$output " libz available"
example.exe : example.obj libz.olb
link $(LOPTS) example,libz.olb/lib
minigzip.exe : minigzip.obj libz.olb
link $(LOPTS) minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
clean :
delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
# Other dependencies.
adler32.obj : adler32.c zutil.h zlib.h zconf.h
compress.obj : compress.c zlib.h zconf.h
crc32.obj : crc32.c zutil.h zlib.h zconf.h
deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h
example.obj : example.c zlib.h zconf.h
gzio.obj : gzio.c zutil.h zlib.h zconf.h
inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
inflate.obj : inflate.c zutil.h zlib.h zconf.h
inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
minigzip.obj : minigzip.c zlib.h zconf.h
trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h
uncompr.obj : uncompr.c zlib.h zconf.h
zutil.obj : zutil.c zutil.h zlib.h zconf.h
infback.obj : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
$ eod
$ close out
$ return
$!------------------------------------------------------------------------------
$!
$! Read list of core library sources from makefile.in and create options
$! needed to build shareable image
$!
$CREA_OLIST:
$ open/read min makefile.in
$ open/write mod modules.opt
$ src_check = "OBJS ="
$MRLOOP:
$ read/end=mrdone min rec
$ if (f$extract(0,6,rec) .nes. src_check) then goto mrloop
$ rec = rec - src_check
$ gosub extra_filnam
$ if (f$element(1,"\",rec) .eqs. "\") then goto mrdone
$MRSLOOP:
$ read/end=mrdone min rec
$ gosub extra_filnam
$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop
$MRDONE:
$ close min
$ close mod
$ return
$!------------------------------------------------------------------------------
$!
$! Take record extracted in crea_olist and split it into single filenames
$!
$EXTRA_FILNAM:
$ myrec = f$edit(rec - "\", "trim,compress")
$ i = 0
$FELOOP:
$ srcfil = f$element(i," ", myrec)
$ if (srcfil .nes. " ")
$ then
$ write mod f$parse(srcfil,,,"NAME"), ".obj"
$ i = i + 1
$ goto feloop
$ endif
$ return
$!------------------------------------------------------------------------------
$!
$! Find current Zlib version number
$!
$FIND_VERSION:
$ open/read h_in 'v_file'
$hloop:
$ read/end=hdone h_in rec
$ rec = f$edit(rec,"TRIM")
$ if (f$extract(0,1,rec) .nes. "#") then goto hloop
$ rec = f$edit(rec - "#", "TRIM")
$ if f$element(0," ",rec) .nes. "define" then goto hloop
$ if f$element(1," ",rec) .eqs. v_string
$ then
$ version = 'f$element(2," ",rec)'
$ goto hdone
$ endif
$ goto hloop
$hdone:
$ close h_in
$ return
$!------------------------------------------------------------------------------
$!
$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
$! information to build a symbol vector for a shareable image
$! All the "brains" of this logic was suggested by Hartmut Becker
$! (Hartmut.Becker@compaq.com). All the bugs were introduced by me
$! (zinser@decus.de), so if you do have problem reports please do not
$! bother Hartmut/HP, but get in touch with me
$!
$ ANAL_OBJ_AXP: Subroutine
$ V = 'F$Verify(0)
$ SAY := "WRITE_ SYS$OUTPUT"
$
$ IF F$SEARCH("''P1'") .EQS. ""
$ THEN
$ SAY "ANAL_OBJ_AXP-E-NOSUCHFILE: Error, inputfile ''p1' not available"
$ goto exit_aa
$ ENDIF
$ IF "''P2'" .EQS. ""
$ THEN
$ SAY "ANAL_OBJ_AXP: Error, no output file provided"
$ goto exit_aa
$ ENDIF
$
$ open/read in 'p1
$ create a.tmp
$ open/append atmp a.tmp
$ loop:
$ read/end=end_loop in line
$ f= f$search(line)
$ if f .eqs. ""
$ then
$ write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'"
$ goto loop
$ endif
$ define/user sys$output nl:
$ define/user sys$error nl:
$ anal/obj/gsd 'f /out=x.tmp
$ open/read xtmp x.tmp
$ XLOOP:
$ read/end=end_xloop xtmp xline
$ xline = f$edit(xline,"compress")
$ write atmp xline
$ goto xloop
$ END_XLOOP:
$ close xtmp
$ goto loop
$ end_loop:
$ close in
$ close atmp
$ if f$search("a.tmp") .eqs. "" -
then $ exit
$ ! all global definitions
$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp
$ ! all procedures
$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp
$ search c.tmp "symbol:"/out=d.tmp
$ define/user sys$output nl:
$ edito/edt/command=sys$input d.tmp
sub/symbol: "/symbol_vector=(/whole
sub/"/=PROCEDURE)/whole
exit
$ ! all data
$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp
$ search e.tmp "symbol:"/out=f.tmp
$ define/user sys$output nl:
$ edito/edt/command=sys$input f.tmp
sub/symbol: "/symbol_vector=(/whole
sub/"/=DATA)/whole
exit
$ sort/nodupl d.tmp,f.tmp 'p2'
$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*
$ if f$search("x.tmp") .nes. "" -
then $ delete x.tmp;*
$!
$ EXIT_AA:
$ if V then set verify
$ endsubroutine
$!------------------------------------------------------------------------------
Loading...
举报
举报成功
我们将于2个工作日内通过站内信反馈结果给你!
请认真填写举报原因,尽可能描述详细。
请选择举报类型
取消
发送
误判申诉

此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。

如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。

取消
提交

简介

github.com clone
暂无标签
未知许可证
查看未知开源许可协议
取消

发行版

暂无发行版

贡献者

全部

近期动态

不能加载更多了
编辑仓库简介
简介内容
主页
马建仓 AI 助手
尝试更多
代码解读
代码找茬
代码优化
Python
1
https://gitee.com/yf33/python.git
git@gitee.com:yf33/python.git
yf33
python
python
master
点此查找更多帮助

搜索帮助

评论
仓库举报
回到顶部
登录提示
该操作需登录 Gitee 帐号,请先登录后再操作。
立即登录
没有帐号,去注册

AltStyle によって変換されたページ (->オリジナル) /