The functions described in this chapter will let you handle and raise Python
exceptions. It is important to understand some of the basics of Python
exception handling. It works somewhat like the POSIX :c:data:`errno` variable:
there is a global indicator (per thread) of the last error that occurred. Most
C API functions don't clear this on success, but will set it to indicate the
cause of the error on failure. Most C API functions also return an error
indicator, usually NULL if they are supposed to return a pointer, or -1
if they return an integer (exception: the :c:func:`PyArg_\*` functions
return 1 for success and 0 for failure).
Concretely, the error indicator consists of three object pointers: the
exception's type, the exception's value, and the traceback object. Any
of those pointers can be NULL if non-set (although some combinations are
forbidden, for example you can't have a non-NULL traceback if the exception
type is NULL).
When a function must fail because some function it called failed, it generally doesn't set the error indicator; the function it called already set it. It is responsible for either handling the error and clearing the exception or returning after cleaning up any resources it holds (such as object references or memory allocations); it should not continue normally if it is not prepared to handle the error. If returning due to an error, it is important to indicate to the caller that an error has been set. If the error is not handled or carefully propagated, additional calls into the Python/C API may not behave as intended and may fail in mysterious ways.
Note
The error indicator is not the result of :func:`sys.exc_info()`. The former corresponds to an exception that is not yet caught (and is therefore still propagating), while the latter returns an exception after it is caught (and has therefore stopped propagating).
.. c:function:: void PyErr_Clear()
Clear the error indicator. If the error indicator is not set, there is no
effect.
.. c:function:: void PyErr_PrintEx(int set_sys_last_vars)
Print a standard traceback to ``sys.stderr`` and clear the error indicator.
**Unless** the error is a ``SystemExit``, in that case no traceback is
printed and the Python process will exit with the error code specified by
the ``SystemExit`` instance.
Call this function **only** when the error indicator is set. Otherwise it
will cause a fatal error!
If *set_sys_last_vars* is nonzero, the variables :data:`sys.last_type`,
:data:`sys.last_value` and :data:`sys.last_traceback` will be set to the
type, value and traceback of the printed exception, respectively.
.. c:function:: void PyErr_Print()
Alias for ``PyErr_PrintEx(1)``.
.. c:function:: void PyErr_WriteUnraisable(PyObject *obj)
Call :func:`sys.unraisablehook` using the current exception and *obj*
argument.
This utility function prints a warning message to ``sys.stderr`` when an
exception has been set but it is impossible for the interpreter to actually
raise the exception. It is used, for example, when an exception occurs in an
:meth:`__del__` method.
The function is called with a single argument *obj* that identifies the context
in which the unraisable exception occurred. If possible,
the repr of *obj* will be printed in the warning message.
An exception must be set when calling this function.
These functions help you set the current thread's error indicator.
For convenience, some of these functions will always return a
NULL pointer for use in a return statement.
.. c:function:: void PyErr_SetString(PyObject *type, const char *message)
This is the most common way to set the error indicator. The first argument
specifies the exception type; it is normally one of the standard exceptions,
e.g. :c:data:`PyExc_RuntimeError`. You need not increment its reference count.
The second argument is an error message; it is decoded from ``'utf-8``'.
.. c:function:: void PyErr_SetObject(PyObject *type, PyObject *value)
This function is similar to :c:func:`PyErr_SetString` but lets you specify an
arbitrary Python object for the "value" of the exception.
.. c:function:: PyObject* PyErr_Format(PyObject *exception, const char *format, ...)
This function sets the error indicator and returns ``NULL``. *exception*
should be a Python exception class. The *format* and subsequent
parameters help format the error message; they have the same meaning and
values as in :c:func:`PyUnicode_FromFormat`. *format* is an ASCII-encoded
string.
.. c:function:: PyObject* PyErr_FormatV(PyObject *exception, const char *format, va_list vargs)
Same as :c:func:`PyErr_Format`, but taking a :c:type:`va_list` argument rather
than a variable number of arguments.
.. versionadded:: 3.5
.. c:function:: void PyErr_SetNone(PyObject *type)
This is a shorthand for ``PyErr_SetObject(type, Py_None)``.
.. c:function:: int PyErr_BadArgument()
This is a shorthand for ``PyErr_SetString(PyExc_TypeError, message)``, where
*message* indicates that a built-in operation was invoked with an illegal
argument. It is mostly for internal use.
.. c:function:: PyObject* PyErr_NoMemory()
This is a shorthand for ``PyErr_SetNone(PyExc_MemoryError)``; it returns ``NULL``
so an object allocation function can write ``return PyErr_NoMemory();`` when it
runs out of memory.
.. c:function:: PyObject* PyErr_SetFromErrno(PyObject *type)
.. index:: single: strerror()
This is a convenience function to raise an exception when a C library function
has returned an error and set the C variable :c:data:`errno`. It constructs a
tuple object whose first item is the integer :c:data:`errno` value and whose
second item is the corresponding error message (gotten from :c:func:`strerror`),
and then calls ``PyErr_SetObject(type, object)``. On Unix, when the
:c:data:`errno` value is :const:`EINTR`, indicating an interrupted system call,
this calls :c:func:`PyErr_CheckSignals`, and if that set the error indicator,
leaves it set to that. The function always returns ``NULL``, so a wrapper
function around a system call can write ``return PyErr_SetFromErrno(type);``
when the system call returns an error.
.. c:function:: PyObject* PyErr_SetFromErrnoWithFilenameObject(PyObject *type, PyObject *filenameObject)
Similar to :c:func:`PyErr_SetFromErrno`, with the additional behavior that if
*filenameObject* is not ``NULL``, it is passed to the constructor of *type* as
a third parameter. In the case of :exc:`OSError` exception,
this is used to define the :attr:`filename` attribute of the
exception instance.
.. c:function:: PyObject* PyErr_SetFromErrnoWithFilenameObjects(PyObject *type, PyObject *filenameObject, PyObject *filenameObject2)
Similar to :c:func:`PyErr_SetFromErrnoWithFilenameObject`, but takes a second
filename object, for raising errors when a function that takes two filenames
fails.
.. versionadded:: 3.4
.. c:function:: PyObject* PyErr_SetFromErrnoWithFilename(PyObject *type, const char *filename)
Similar to :c:func:`PyErr_SetFromErrnoWithFilenameObject`, but the filename
is given as a C string. *filename* is decoded from the filesystem encoding
(:func:`os.fsdecode`).
.. c:function:: PyObject* PyErr_SetFromWindowsErr(int ierr)
This is a convenience function to raise :exc:`WindowsError`. If called with
*ierr* of :c:data:`0`, the error code returned by a call to :c:func:`GetLastError`
is used instead. It calls the Win32 function :c:func:`FormatMessage` to retrieve
the Windows description of error code given by *ierr* or :c:func:`GetLastError`,
then it constructs a tuple object whose first item is the *ierr* value and whose
second item is the corresponding error message (gotten from
:c:func:`FormatMessage`), and then calls ``PyErr_SetObject(PyExc_WindowsError,
object)``. This function always returns ``NULL``.
.. availability:: Windows.
.. c:function:: PyObject* PyErr_SetExcFromWindowsErr(PyObject *type, int ierr)
Similar to :c:func:`PyErr_SetFromWindowsErr`, with an additional parameter
specifying the exception type to be raised.
.. availability:: Windows.
.. c:function:: PyObject* PyErr_SetFromWindowsErrWithFilename(int ierr, const char *filename)
Similar to :c:func:`PyErr_SetFromWindowsErrWithFilenameObject`, but the
filename is given as a C string. *filename* is decoded from the filesystem
encoding (:func:`os.fsdecode`).
.. availability:: Windows.
.. c:function:: PyObject* PyErr_SetExcFromWindowsErrWithFilenameObject(PyObject *type, int ierr, PyObject *filename)
Similar to :c:func:`PyErr_SetFromWindowsErrWithFilenameObject`, with an
additional parameter specifying the exception type to be raised.
.. availability:: Windows.
.. c:function:: PyObject* PyErr_SetExcFromWindowsErrWithFilenameObjects(PyObject *type, int ierr, PyObject *filename, PyObject *filename2)
Similar to :c:func:`PyErr_SetExcFromWindowsErrWithFilenameObject`,
but accepts a second filename object.
.. availability:: Windows.
.. versionadded:: 3.4
.. c:function:: PyObject* PyErr_SetExcFromWindowsErrWithFilename(PyObject *type, int ierr, const char *filename)
Similar to :c:func:`PyErr_SetFromWindowsErrWithFilename`, with an additional
parameter specifying the exception type to be raised.
.. availability:: Windows.
.. c:function:: PyObject* PyErr_SetImportError(PyObject *msg, PyObject *name, PyObject *path)
This is a convenience function to raise :exc:`ImportError`. *msg* will be
set as the exception's message string. *name* and *path*, both of which can
be ``NULL``, will be set as the :exc:`ImportError`'s respective ``name``
and ``path`` attributes.
.. versionadded:: 3.3
.. c:function:: void PyErr_SyntaxLocationObject(PyObject *filename, int lineno, int col_offset)
Set file, line, and offset information for the current exception. If the
current exception is not a :exc:`SyntaxError`, then it sets additional
attributes, which make the exception printing subsystem think the exception
is a :exc:`SyntaxError`.
.. versionadded:: 3.4
.. c:function:: void PyErr_SyntaxLocationEx(const char *filename, int lineno, int col_offset)
Like :c:func:`PyErr_SyntaxLocationObject`, but *filename* is a byte string
decoded from the filesystem encoding (:func:`os.fsdecode`).
.. versionadded:: 3.2
.. c:function:: void PyErr_SyntaxLocation(const char *filename, int lineno)
Like :c:func:`PyErr_SyntaxLocationEx`, but the col_offset parameter is
omitted.
.. c:function:: void PyErr_BadInternalCall()
This is a shorthand for ``PyErr_SetString(PyExc_SystemError, message)``,
where *message* indicates that an internal operation (e.g. a Python/C API
function) was invoked with an illegal argument. It is mostly for internal
use.
Use these functions to issue warnings from C code. They mirror similar
functions exported by the Python :mod:`warnings` module. They normally
print a warning message to sys.stderr; however, it is
also possible that the user has specified that warnings are to be turned into
errors, and in that case they will raise an exception. It is also possible that
the functions raise an exception because of a problem with the warning machinery.
The return value is 0 if no exception is raised, or -1 if an exception
is raised. (It is not possible to determine whether a warning message is
actually printed, nor what the reason is for the exception; this is
intentional.) If an exception is raised, the caller should do its normal
exception handling (for example, :c:func:`Py_DECREF` owned references and return
an error value).
.. c:function:: int PyErr_WarnEx(PyObject *category, const char *message, Py_ssize_t stack_level)
Issue a warning message. The *category* argument is a warning category (see
below) or ``NULL``; the *message* argument is a UTF-8 encoded string. *stack_level* is a
positive number giving a number of stack frames; the warning will be issued from
the currently executing line of code in that stack frame. A *stack_level* of 1
is the function calling :c:func:`PyErr_WarnEx`, 2 is the function above that,
and so forth.
Warning categories must be subclasses of :c:data:`PyExc_Warning`;
:c:data:`PyExc_Warning` is a subclass of :c:data:`PyExc_Exception`;
the default warning category is :c:data:`PyExc_RuntimeWarning`. The standard
Python warning categories are available as global variables whose names are
enumerated at :ref:`standardwarningcategories`.
For information about warning control, see the documentation for the
:mod:`warnings` module and the :option:`-W` option in the command line
documentation. There is no C API for warning control.
.. c:function:: PyObject* PyErr_SetImportErrorSubclass(PyObject *exception, PyObject *msg, PyObject *name, PyObject *path)
Much like :c:func:`PyErr_SetImportError` but this function allows for
specifying a subclass of :exc:`ImportError` to raise.
.. versionadded:: 3.6
.. c:function:: int PyErr_WarnExplicitObject(PyObject *category, PyObject *message, PyObject *filename, int lineno, PyObject *module, PyObject *registry)
Issue a warning message with explicit control over all warning attributes. This
is a straightforward wrapper around the Python function
:func:`warnings.warn_explicit`, see there for more information. The *module*
and *registry* arguments may be set to ``NULL`` to get the default effect
described there.
.. versionadded:: 3.4
.. c:function:: int PyErr_WarnExplicit(PyObject *category, const char *message, const char *filename, int lineno, const char *module, PyObject *registry)
Similar to :c:func:`PyErr_WarnExplicitObject` except that *message* and
*module* are UTF-8 encoded strings, and *filename* is decoded from the
filesystem encoding (:func:`os.fsdecode`).
.. c:function:: int PyErr_WarnFormat(PyObject *category, Py_ssize_t stack_level, const char *format, ...)
Function similar to :c:func:`PyErr_WarnEx`, but use
:c:func:`PyUnicode_FromFormat` to format the warning message. *format* is
an ASCII-encoded string.
.. versionadded:: 3.2
.. c:function:: int PyErr_ResourceWarning(PyObject *source, Py_ssize_t stack_level, const char *format, ...)
Function similar to :c:func:`PyErr_WarnFormat`, but *category* is
:exc:`ResourceWarning` and pass *source* to :func:`warnings.WarningMessage`.
.. versionadded:: 3.6
.. c:function:: PyObject* PyErr_Occurred()
Test whether the error indicator is set. If set, return the exception *type*
(the first argument to the last call to one of the :c:func:`PyErr_Set\*`
functions or to :c:func:`PyErr_Restore`). If not set, return ``NULL``. You do not
own a reference to the return value, so you do not need to :c:func:`Py_DECREF`
it.
.. note::
Do not compare the return value to a specific exception; use
:c:func:`PyErr_ExceptionMatches` instead, shown below. (The comparison could
easily fail since the exception may be an instance instead of a class, in the
case of a class exception, or it may be a subclass of the expected exception.)
.. c:function:: int PyErr_ExceptionMatches(PyObject *exc)
Equivalent to ``PyErr_GivenExceptionMatches(PyErr_Occurred(), exc)``. This
should only be called when an exception is actually set; a memory access
violation will occur if no exception has been raised.
.. c:function:: int PyErr_GivenExceptionMatches(PyObject *given, PyObject *exc)
Return true if the *given* exception matches the exception type in *exc*. If
*exc* is a class object, this also returns true when *given* is an instance
of a subclass. If *exc* is a tuple, all exception types in the tuple (and
recursively in subtuples) are searched for a match.
.. c:function:: void PyErr_Fetch(PyObject **ptype, PyObject **pvalue, PyObject **ptraceback)
Retrieve the error indicator into three variables whose addresses are passed.
If the error indicator is not set, set all three variables to ``NULL``. If it is
set, it will be cleared and you own a reference to each object retrieved. The
value and traceback object may be ``NULL`` even when the type object is not.
.. note::
This function is normally only used by code that needs to catch exceptions or
by code that needs to save and restore the error indicator temporarily, e.g.::
{
PyObject *type, *value, *traceback;
PyErr_Fetch(&type, &value, &traceback);
/* ... code that might produce other errors ... */
PyErr_Restore(type, value, traceback);
}
.. c:function:: void PyErr_Restore(PyObject *type, PyObject *value, PyObject *traceback)
Set the error indicator from the three objects. If the error indicator is
already set, it is cleared first. If the objects are ``NULL``, the error
indicator is cleared. Do not pass a ``NULL`` type and non-``NULL`` value or
traceback. The exception type should be a class. Do not pass an invalid
exception type or value. (Violating these rules will cause subtle problems
later.) This call takes away a reference to each object: you must own a
reference to each object before the call and after the call you no longer own
these references. (If you don't understand this, don't use this function. I
warned you.)
.. note::
This function is normally only used by code that needs to save and restore the
error indicator temporarily. Use :c:func:`PyErr_Fetch` to save the current
error indicator.
.. c:function:: void PyErr_NormalizeException(PyObject**exc, PyObject**val, PyObject**tb)
Under certain circumstances, the values returned by :c:func:`PyErr_Fetch` below
can be "unnormalized", meaning that ``*exc`` is a class object but ``*val`` is
not an instance of the same class. This function can be used to instantiate
the class in that case. If the values are already normalized, nothing happens.
The delayed normalization is implemented to improve performance.
.. note::
This function *does not* implicitly set the ``__traceback__``
attribute on the exception value. If setting the traceback
appropriately is desired, the following additional snippet is needed::
if (tb != NULL) {
PyException_SetTraceback(val, tb);
}
.. c:function:: void PyErr_GetExcInfo(PyObject **ptype, PyObject **pvalue, PyObject **ptraceback)
Retrieve the exception info, as known from ``sys.exc_info()``. This refers
to an exception that was *already caught*, not to an exception that was
freshly raised. Returns new references for the three objects, any of which
may be ``NULL``. Does not modify the exception info state.
.. note::
This function is not normally used by code that wants to handle exceptions.
Rather, it can be used when code needs to save and restore the exception
state temporarily. Use :c:func:`PyErr_SetExcInfo` to restore or clear the
exception state.
.. versionadded:: 3.3
.. c:function:: void PyErr_SetExcInfo(PyObject *type, PyObject *value, PyObject *traceback)
Set the exception info, as known from ``sys.exc_info()``. This refers
to an exception that was *already caught*, not to an exception that was
freshly raised. This function steals the references of the arguments.
To clear the exception state, pass ``NULL`` for all three arguments.
For general rules about the three arguments, see :c:func:`PyErr_Restore`.
.. note::
This function is not normally used by code that wants to handle exceptions.
Rather, it can be used when code needs to save and restore the exception
state temporarily. Use :c:func:`PyErr_GetExcInfo` to read the exception
state.
.. versionadded:: 3.3
.. c:function:: int PyErr_CheckSignals()
.. index::
module: signal
single: SIGINT
single: KeyboardInterrupt (built-in exception)
This function interacts with Python's signal handling. It checks whether a
signal has been sent to the processes and if so, invokes the corresponding
signal handler. If the :mod:`signal` module is supported, this can invoke a
signal handler written in Python. In all cases, the default effect for
:const:`SIGINT` is to raise the :exc:`KeyboardInterrupt` exception. If an
exception is raised the error indicator is set and the function returns ``-1``;
otherwise the function returns ``0``. The error indicator may or may not be
cleared if it was previously set.
.. c:function:: void PyErr_SetInterrupt()
.. index::
single: SIGINT
single: KeyboardInterrupt (built-in exception)
Simulate the effect of a :const:`SIGINT` signal arriving. The next time
:c:func:`PyErr_CheckSignals` is called, the Python signal handler for
:const:`SIGINT` will be called.
If :const:`SIGINT` isn't handled by Python (it was set to
:data:`signal.SIG_DFL` or :data:`signal.SIG_IGN`), this function does
nothing.
.. c:function:: int PySignal_SetWakeupFd(int fd)
This utility function specifies a file descriptor to which the signal number
is written as a single byte whenever a signal is received. *fd* must be
non-blocking. It returns the previous such file descriptor.
The value ``-1`` disables the feature; this is the initial state.
This is equivalent to :func:`signal.set_wakeup_fd` in Python, but without any
error checking. *fd* should be a valid file descriptor. The function should
only be called from the main thread.
.. versionchanged:: 3.5
On Windows, the function now also supports socket handles.
.. c:function:: PyObject* PyErr_NewException(const char *name, PyObject *base, PyObject *dict)
This utility function creates and returns a new exception class. The *name*
argument must be the name of the new exception, a C string of the form
``module.classname``. The *base* and *dict* arguments are normally ``NULL``.
This creates a class object derived from :exc:`Exception` (accessible in C as
:c:data:`PyExc_Exception`).
The :attr:`__module__` attribute of the new class is set to the first part (up
to the last dot) of the *name* argument, and the class name is set to the last
part (after the last dot). The *base* argument can be used to specify alternate
base classes; it can either be only one class or a tuple of classes. The *dict*
argument can be used to specify a dictionary of class variables and methods.
.. c:function:: PyObject* PyErr_NewExceptionWithDoc(const char *name, const char *doc, PyObject *base, PyObject *dict)
Same as :c:func:`PyErr_NewException`, except that the new exception class can
easily be given a docstring: If *doc* is non-``NULL``, it will be used as the
docstring for the exception class.
.. versionadded:: 3.2
.. c:function:: PyObject* PyException_GetTraceback(PyObject *ex)
Return the traceback associated with the exception as a new reference, as
accessible from Python through :attr:`__traceback__`. If there is no
traceback associated, this returns ``NULL``.
.. c:function:: int PyException_SetTraceback(PyObject *ex, PyObject *tb)
Set the traceback associated with the exception to *tb*. Use ``Py_None`` to
clear it.
.. c:function:: PyObject* PyException_GetContext(PyObject *ex)
Return the context (another exception instance during whose handling *ex* was
raised) associated with the exception as a new reference, as accessible from
Python through :attr:`__context__`. If there is no context associated, this
returns ``NULL``.
.. c:function:: void PyException_SetContext(PyObject *ex, PyObject *ctx)
Set the context associated with the exception to *ctx*. Use ``NULL`` to clear
it. There is no type check to make sure that *ctx* is an exception instance.
This steals a reference to *ctx*.
.. c:function:: PyObject* PyException_GetCause(PyObject *ex)
Return the cause (either an exception instance, or :const:`None`,
set by ``raise ... from ...``) associated with the exception as a new
reference, as accessible from Python through :attr:`__cause__`.
.. c:function:: void PyException_SetCause(PyObject *ex, PyObject *cause)
Set the cause associated with the exception to *cause*. Use ``NULL`` to clear
it. There is no type check to make sure that *cause* is either an exception
instance or :const:`None`. This steals a reference to *cause*.
:attr:`__suppress_context__` is implicitly set to ``True`` by this function.
The following functions are used to create and modify Unicode exceptions from C.
.. c:function:: PyObject* PyUnicodeDecodeError_Create(const char *encoding, const char *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason)
Create a :class:`UnicodeDecodeError` object with the attributes *encoding*,
*object*, *length*, *start*, *end* and *reason*. *encoding* and *reason* are
UTF-8 encoded strings.
.. c:function:: PyObject* PyUnicodeEncodeError_Create(const char *encoding, const Py_UNICODE *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason)
Create a :class:`UnicodeEncodeError` object with the attributes *encoding*,
*object*, *length*, *start*, *end* and *reason*. *encoding* and *reason* are
UTF-8 encoded strings.
.. c:function:: PyObject* PyUnicodeTranslateError_Create(const Py_UNICODE *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason)
Create a :class:`UnicodeTranslateError` object with the attributes *object*,
*length*, *start*, *end* and *reason*. *reason* is a UTF-8 encoded string.
.. c:function:: PyObject* PyUnicodeDecodeError_GetEncoding(PyObject *exc)
PyObject* PyUnicodeEncodeError_GetEncoding(PyObject *exc)
Return the *encoding* attribute of the given exception object.
.. c:function:: PyObject* PyUnicodeDecodeError_GetObject(PyObject *exc)
PyObject* PyUnicodeEncodeError_GetObject(PyObject *exc)
PyObject* PyUnicodeTranslateError_GetObject(PyObject *exc)
Return the *object* attribute of the given exception object.
.. c:function:: int PyUnicodeDecodeError_GetStart(PyObject *exc, Py_ssize_t *start)
int PyUnicodeEncodeError_GetStart(PyObject *exc, Py_ssize_t *start)
int PyUnicodeTranslateError_GetStart(PyObject *exc, Py_ssize_t *start)
Get the *start* attribute of the given exception object and place it into
*\*start*. *start* must not be ``NULL``. Return ``0`` on success, ``-1`` on
failure.
.. c:function:: int PyUnicodeDecodeError_SetStart(PyObject *exc, Py_ssize_t start)
int PyUnicodeEncodeError_SetStart(PyObject *exc, Py_ssize_t start)
int PyUnicodeTranslateError_SetStart(PyObject *exc, Py_ssize_t start)
Set the *start* attribute of the given exception object to *start*. Return
``0`` on success, ``-1`` on failure.
.. c:function:: int PyUnicodeDecodeError_GetEnd(PyObject *exc, Py_ssize_t *end)
int PyUnicodeEncodeError_GetEnd(PyObject *exc, Py_ssize_t *end)
int PyUnicodeTranslateError_GetEnd(PyObject *exc, Py_ssize_t *end)
Get the *end* attribute of the given exception object and place it into
*\*end*. *end* must not be ``NULL``. Return ``0`` on success, ``-1`` on
failure.
.. c:function:: int PyUnicodeDecodeError_SetEnd(PyObject *exc, Py_ssize_t end)
int PyUnicodeEncodeError_SetEnd(PyObject *exc, Py_ssize_t end)
int PyUnicodeTranslateError_SetEnd(PyObject *exc, Py_ssize_t end)
Set the *end* attribute of the given exception object to *end*. Return ``0``
on success, ``-1`` on failure.
.. c:function:: PyObject* PyUnicodeDecodeError_GetReason(PyObject *exc)
PyObject* PyUnicodeEncodeError_GetReason(PyObject *exc)
PyObject* PyUnicodeTranslateError_GetReason(PyObject *exc)
Return the *reason* attribute of the given exception object.
.. c:function:: int PyUnicodeDecodeError_SetReason(PyObject *exc, const char *reason)
int PyUnicodeEncodeError_SetReason(PyObject *exc, const char *reason)
int PyUnicodeTranslateError_SetReason(PyObject *exc, const char *reason)
Set the *reason* attribute of the given exception object to *reason*. Return
``0`` on success, ``-1`` on failure.
These two functions provide a way to perform safe recursive calls at the C level, both in the core and in extension modules. They are needed if the recursive code does not necessarily invoke Python code (which tracks its recursion depth automatically).
.. c:function:: int Py_EnterRecursiveCall(const char *where)
Marks a point where a recursive C-level call is about to be performed.
If :const:`USE_STACKCHECK` is defined, this function checks if the OS
stack overflowed using :c:func:`PyOS_CheckStack`. In this is the case, it
sets a :exc:`MemoryError` and returns a nonzero value.
The function then checks if the recursion limit is reached. If this is the
case, a :exc:`RecursionError` is set and a nonzero value is returned.
Otherwise, zero is returned.
*where* should be a string such as ``" in instance check"`` to be
concatenated to the :exc:`RecursionError` message caused by the recursion
depth limit.
.. c:function:: void Py_LeaveRecursiveCall()
Ends a :c:func:`Py_EnterRecursiveCall`. Must be called once for each
*successful* invocation of :c:func:`Py_EnterRecursiveCall`.
Properly implementing :c:member:`~PyTypeObject.tp_repr` for container types requires special recursion handling. In addition to protecting the stack, :c:member:`~PyTypeObject.tp_repr` also needs to track objects to prevent cycles. The following two functions facilitate this functionality. Effectively, these are the C equivalent to :func:`reprlib.recursive_repr`.
.. c:function:: int Py_ReprEnter(PyObject *object)
Called at the beginning of the :c:member:`~PyTypeObject.tp_repr` implementation to
detect cycles.
If the object has already been processed, the function returns a
positive integer. In that case the :c:member:`~PyTypeObject.tp_repr` implementation
should return a string object indicating a cycle. As examples,
:class:`dict` objects return ``{...}`` and :class:`list` objects
return ``[...]``.
The function will return a negative integer if the recursion limit
is reached. In that case the :c:member:`~PyTypeObject.tp_repr` implementation should
typically return ``NULL``.
Otherwise, the function returns zero and the :c:member:`~PyTypeObject.tp_repr`
implementation can continue normally.
.. c:function:: void Py_ReprLeave(PyObject *object)
Ends a :c:func:`Py_ReprEnter`. Must be called once for each
invocation of :c:func:`Py_ReprEnter` that returns zero.
All standard Python exceptions are available as global variables whose names are
PyExc_ followed by the Python exception name. These have the type
:c:type:`PyObject\*`; they are all class objects. For completeness, here are all
the variables:
.. index::
single: PyExc_BaseException
single: PyExc_Exception
single: PyExc_ArithmeticError
single: PyExc_AssertionError
single: PyExc_AttributeError
single: PyExc_BlockingIOError
single: PyExc_BrokenPipeError
single: PyExc_BufferError
single: PyExc_ChildProcessError
single: PyExc_ConnectionAbortedError
single: PyExc_ConnectionError
single: PyExc_ConnectionRefusedError
single: PyExc_ConnectionResetError
single: PyExc_EOFError
single: PyExc_FileExistsError
single: PyExc_FileNotFoundError
single: PyExc_FloatingPointError
single: PyExc_GeneratorExit
single: PyExc_ImportError
single: PyExc_IndentationError
single: PyExc_IndexError
single: PyExc_InterruptedError
single: PyExc_IsADirectoryError
single: PyExc_KeyError
single: PyExc_KeyboardInterrupt
single: PyExc_LookupError
single: PyExc_MemoryError
single: PyExc_ModuleNotFoundError
single: PyExc_NameError
single: PyExc_NotADirectoryError
single: PyExc_NotImplementedError
single: PyExc_OSError
single: PyExc_OverflowError
single: PyExc_PermissionError
single: PyExc_ProcessLookupError
single: PyExc_RecursionError
single: PyExc_ReferenceError
single: PyExc_RuntimeError
single: PyExc_StopAsyncIteration
single: PyExc_StopIteration
single: PyExc_SyntaxError
single: PyExc_SystemError
single: PyExc_SystemExit
single: PyExc_TabError
single: PyExc_TimeoutError
single: PyExc_TypeError
single: PyExc_UnboundLocalError
single: PyExc_UnicodeDecodeError
single: PyExc_UnicodeEncodeError
single: PyExc_UnicodeError
single: PyExc_UnicodeTranslateError
single: PyExc_ValueError
single: PyExc_ZeroDivisionError
.. versionadded:: 3.3
:c:data:`PyExc_BlockingIOError`, :c:data:`PyExc_BrokenPipeError`,
:c:data:`PyExc_ChildProcessError`, :c:data:`PyExc_ConnectionError`,
:c:data:`PyExc_ConnectionAbortedError`, :c:data:`PyExc_ConnectionRefusedError`,
:c:data:`PyExc_ConnectionResetError`, :c:data:`PyExc_FileExistsError`,
:c:data:`PyExc_FileNotFoundError`, :c:data:`PyExc_InterruptedError`,
:c:data:`PyExc_IsADirectoryError`, :c:data:`PyExc_NotADirectoryError`,
:c:data:`PyExc_PermissionError`, :c:data:`PyExc_ProcessLookupError`
and :c:data:`PyExc_TimeoutError` were introduced following :pep:`3151`.
.. versionadded:: 3.5
:c:data:`PyExc_StopAsyncIteration` and :c:data:`PyExc_RecursionError`.
.. versionadded:: 3.6
:c:data:`PyExc_ModuleNotFoundError`.
These are compatibility aliases to :c:data:`PyExc_OSError`:
.. index::
single: PyExc_EnvironmentError
single: PyExc_IOError
single: PyExc_WindowsError
| C Name | Notes |
|---|---|
| :c:data:`PyExc_EnvironmentError` | |
| :c:data:`PyExc_IOError` | |
| :c:data:`PyExc_WindowsError` | (3) |
.. versionchanged:: 3.3
These aliases used to be separate exception types.
Notes:
MS_WINDOWS is defined.All standard Python warning categories are available as global variables whose
names are PyExc_ followed by the Python exception name. These have the type
:c:type:`PyObject\*`; they are all class objects. For completeness, here are all
the variables:
.. index::
single: PyExc_Warning
single: PyExc_BytesWarning
single: PyExc_DeprecationWarning
single: PyExc_FutureWarning
single: PyExc_ImportWarning
single: PyExc_PendingDeprecationWarning
single: PyExc_ResourceWarning
single: PyExc_RuntimeWarning
single: PyExc_SyntaxWarning
single: PyExc_UnicodeWarning
single: PyExc_UserWarning
.. versionadded:: 3.2
:c:data:`PyExc_ResourceWarning`.
Notes:
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。