How can I model this linear power system in MATLAB?

Question

For my power system, let us suppose it has the following dynamic model: \$\ x ' = f(x,u)\$.

This dynamic model consists of four first order differential equations (see below).

Then, I linearized my system using Newton-Raphson method. My new linear system will be:

\$\ \Delta x ' = A \Delta x + B u +\$ disturbance

Where:

• \$\ x \$ is the state vector that that contains 4 first order differential equations: (the power angle δ , the angular speed of the rotor ω, the generated voltage in the quadrature axis of the generator eq', and the field voltage of the generator in the direct axis \$\ E_d\$ ). a.k.a.: \$\ \Delta x = [\Delta \delta, \Delta \omega. \Delta e_q' , \Delta E_d ] ^T \$

• \$\ u \$ is the control part. Let us make it zero for now

• Let us assume that the disturbance in the power input of the generator is just 30% (0.3 pu) for only 1 second.

enter image description here

• "A" is a 4 x 4 matrix. Let us say:

$$ A= \begin{bmatrix}1 & 2 & 3 &4\5円 & 6 &7 &8 \9円 & 1 & 2 & 3\4円 & 5 & 6 & 7 \end{bmatrix} $$

The question is:

How can I model the system shown above using MATLAB? I want to plot the four state variables, but I don't know where to begin

Is there any specific code that will help me to simulate this system.

• Dennis Jaheruddin: Not sure what exactly you want to achieve, but usually the trick to modeling is staring with the errors (disturbance?) and then building it up backwards.

Answer 1

To solve this problem you should look at the ODE solvers in MATLAB.

Note that your function does not describe what the response of the system is to a variation in input power Pm.

Below I have written up an implementation, based on the example in http://www.its.caltech.edu/~ae121/ae121/ode45_Ref2.pdf . In my example I have added a term Pm to the differential equations, so you can see how a disturbance might affect the dynamics.

Unfortunately I don't have MATLAB installed so I can't check whether there are any errors in this, but the idea should be clear.

function main 
% a simple example to solve ODE's
% Uses ODE45 to solve 
% dx_dt(1) = 1*x(1)+2*x(2)+3*x(3)+4*x(4)
% dx_dt(2) = 5*x(1)+6*x(2)+7*x(3)+8*x(4)+Pm
% dx_dt(3) = 9*x(1)+1*x(2)+2*x(3)+3*x(4)
% dx_dt(4) = 4*x(1)+5*x(2)+6*x(3)+7*x(4)
%set an error
options=odeset('RelTol',1e-6);
%initial conditions
X0 = [0;0;0;0]; 
Pm0=1;
%before disturbance
tspan1 = [-1,0]; 
[t1,X1] = ode45('system',tspan1,X0,options,Pm0);
%during disturbance
tspan2 = [0,1];
[t2,X2] = ode45('system',tspan2,X1(end),options,1.3*Pm0);
%after disturbance
tspan3 = [1,3];
[t3,X3] = ode45('system',tspan3,X2(end),options,Pm0);
time=[t1,t2,t3];
X=[X1,X2,X3];
%plot the results
figure 
hold on
plot(time,X)
legend('x1','x2','x3','x4');ylabel('x');xlabel('t') 
return
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
function [dx_dt]= system(t,x,Pm) 
%a function which returns a rate of change vector
A = [1,2,3,4;
 5,6,7,8;... 
 9,1,2,3;
 4,5,6,7]
P=[0;Pm;0;0]
dx_dt = A*x+P; 
return