- https://armbian.com
-
Just a random dude spending lots of time at Armbian Linux.
-
Joined on
2024年11月04日
06daa1bf5c
Automatic board configs status synchronise
bdace5cc91
build(deps): bump gitpython from 3.1.50 to 3.1.51
d14878c7e9
rewrite the subject to arm64: dts: rk3588-orangepi-5-ultra: Enable HDMI RX with HPD detection
ce992069cf
fix hdmi rx on orangepi5 ultra
ce72d1395f
Automatic board configs status synchronise
90820c0239
Add board: EASY EAI Nano RV1126
bdace5cc91
build(deps): bump gitpython from 3.1.50 to 3.1.51
EvilOlaf
deleted branch 2026年07月13日 15:00:33 +02:00
dependabot/pip/gitpython-3.1.51 from armbian/build
9a63d6b658
Automatic board configs status synchronise
e09dac1e7a
patch/qrb2210-7.1: forward-port Arduino UNO Q patches to 7.1
1f0862c232
family: qrb2210: bump edge to mainline 7.1
90820c0239
Add board: EASY EAI Nano RV1126
cd57493fee
build(deps): bump gitpython from 3.1.50 to 3.1.51
EvilOlaf
created branch dependabot/pip/gitpython-3.1.51 in armbian/build
2026年07月13日 07:10:52 +02:00
8013f3bfdf
Automatic board configs status synchronise
58e265e39e
BPI-CM4: Update Waveshare CM4-IO-BASE-B dts
141edd29fe
Meson64 7.2.y: Add hwmon emc2305 fixups for driver
e09dac1e7a
patch/qrb2210-7.1: forward-port Arduino UNO Q patches to 7.1
1f0862c232
family: qrb2210: bump edge to mainline 7.1
3217d7c179
Automatic board configs status synchronise
20deb8e81c
nanopi-m6: fix nvme prevents sd card from booting
58e265e39e
BPI-CM4: Update Waveshare CM4-IO-BASE-B dts
141edd29fe
Meson64 7.2.y: Add hwmon emc2305 fixups for driver
6636294fd0
Automatic board configs status synchronise
684ccbaffc
sunxi: mellowflyc5: configure card detect GPIO for mmc0 in U-Boot
10d7b1f585
sunxi: kernel: compile COMMON_CLK_PWM built-in to prevent NFS boot deadlock
d1902ea335
sunxi: mellowflyc5: align U-Boot DTS DRAM voltage with hardware and defconfig
ff59a603da
sunxi: mellowflyc5: Enable EMAC1 in U-Boot for network boot support
20deb8e81c
nanopi-m6: fix nvme prevents sd card from booting
8b539ad745
nanopi-m6: fix nvme prevents sd card from booting
1f5cdfdb3a
Automatic board configs status synchronise
815a50b664
Feat: Add support for the Mellow Fly C5 3D Printer board (#9584)
fcaffed44d
Add board: Lubancat 5IO (RK3588) (#10029)